This paper presents a low cost, simple, and highly accurate resolver-to-digital converter (RDC) for electrical drive applications based on an integrated software approach, thus allowing a significant reduction of hardware components count with significant improvements in terms of reliability, reduction of fault rate, and susceptibility to electromagnetic interference (EMI). Particular attention has been addressed to cost which is 25% off over conventional RDC. Simulations and experimental tests confirm the high quality of the proposed system.

This paper presents the performances of rainfall energy harvesting through the use of a piezoelectric transducer and an Arduino-based measuring system. Different studies agree on the possibility of generating electricity from rainfall, but to date, a study on measuring the quantity of energy produced during rainfall is still missing. The present study begins with results obtained from laboratory researchers using piezoelectric transducers and oscilloscopes, finalized to measure the energy produced from a single raindrop, and concludes with an ad hoc Arduino-based measuring system, aimed to measure the actual amount of electrical energy produced by a piezoelectric transducer that is exposed to rainfall of variable durations.

Winding design methods have been a subject of research for many years of the past century. Many methods have been developed, each one characterized by some advantages and drawbacks. Nowadays, the star of slots is the most widespread design tool for electrical machine windings. In this context, this paper presents a simple and effective procedure to determine the distribution of the slot EMFs over the phases and of the winding configuration in all possible typologies of electrical machines equipped with symmetrical windings. The result of this procedure gives a Winding Distribution Table (WDT), which can be used to define coils and coil groups connections and also to simply implement winding optimizations techniques, such as zone widening, imbrication, etc. Moreover, this procedure can be easily implemented on a computer in order to perform automated winding designs for rotating electrical machines. Several examples are provided in order to validate the proposed procedure.

This paper describes an experimental investigation on the power losses variations occurring in an Interior Permanent Magnet Synchronous Motor (IPMSM) with respect to the direct axis current component. Such investigation can be useful to determine a mathematical model accounting for copper, iron and mechanical friction losses, and for the arrangement of a speed control drive system equipped with a real-time power losses minimization algorithm. In particular, a test bench has been set up in order to carry out all measurements and the final power loss identification. The test bed is composed by a IPMSM drive with a field oriented control (FOC) strategy, a power analyzer, a dynamometric brake and a computer for data storage and processing. The experimental investigation was carried out by making several tests at different speed, magnetization and load conditions. From the obtained results, it can be stated that the power losses occurring in the IPMSM can be minimized by acting on the direct axis current component, increasing, therefore, the efficiency, without decreasing the dynamic performances of the drive.

In the last decade, due to the increased use of direct current, the space charge accumulation phenomenon has reached more interest. In this regard, several non-destructive measurement systems were used. In particular, for solid dielectrics, the acoustic methods have had greater success. This review presents a brief historical evolution of the Pulse Electro-Acoustic (PEA) method, describing the working operation, the thicknesses analyzed and the spatial resolution for the different configurations of the PEA cell. The Pressure Wave Propagation (PWP) method in both configurations Piezo-PWP and Laser Induced Pressure Pulse (LIPP) is also described.