With the application of lithium batteries more and more widely, in order to accurately estimate the state of charge (SoC) of the battery, this paper uses the iterated extended Kalman filter (IEKF) algorithm to estimate the SoC. The Levenberg–Marquardt (LM) method is used to optimize the error covariance matrix of IKEF. Based on the hybrid pulse power characteristics experiment, a second-order Thevenin model with variable parameters is established on the MATLAB platform. The experimental results show that the proposed model is effective under the constant current discharge condition, the Federal Urban Driving Schedule (FUDS) condition, and the Beijing dynamic stress test (BJDST) condition. The results show that the simulation error of the improved LM-IEKF algorithm is less than 2% under different working conditions, which is lower than that of the IKEF algorithm. The improved algorithm has a fast convergence speed to the true value, and it has a good estimation accuracy in the case of large changes in external input current. Additionally, the fluctuation of error is relatively stable, which proves the reliability of the algorithm.
In this study, we make use of the AC field-effect flow control on induced-charge electroosmosis (ICEO), to develop an electrokinetic micromixer with 3D electrode layouts, greatly enhancing the device performance compared to its 2D counterpart of coplanar metal strips. A biased AC voltage wave applied to the central gate terminal, i.e., AC field-effect control, endows flow field-effect-transistor of ICEO the capability to produce arbitrary symmetry breaking in the transverse electrokinetic vortex flow pattern, which makes it fascinating for microfluidic mixing. Using the Debye-Huckel approximation, a mathematical model is established to test the feasibility of the new device design in stirring nanoparticle samples carried by co-flowing laminar streams. The effect of various experimental parameters on constructing a viable micromixer is investigated, and an integrated microdevice with a series of gate electrode bars disposed along the centerline of the channel bottom surface is proposed for realizing high-flux mixing. Our physical demonstration on field-effect nonlinear electroosmosis control in 3D electrode configurations provides useful guidelines for electroconvective manipulation of nanoscale objects in modern microfluidic systems.
Shadows and normal light illumination and road and non-road areas are two pairs of contradictory symmetrical individuals. To achieve accurate road detection, it is necessary to remove interference caused by uneven illumination, such as shadows. This paper proposes a road detection algorithm based on a learning and illumination-independent image to solve the following problems: First, most road detection methods are sensitive to variation of illumination. Second, with traditional road detection methods based on illumination invariability, it is difficult to determine the calibration angle of the camera axis, and the sampling of road samples can be distorted. The proposed method contains three stages: The establishment of a classifier, the online capturing of an illumination-independent image, and the road detection. During the establishment of a classifier, a support vector machine (SVM) classifier for the road block is generated through training with the multi-feature fusion method. During the online capturing of an illumination-independent image, the road interest region is obtained by using a cascaded Hough transform parameterized by a parallel coordinate system. Five road blocks are obtained through the SVM classifier, and the RGB (Red, Green, Blue) space of the combined road blocks is converted to a geometric mean log chromatic space. Next, the camera axis calibration angle for each frame is determined according to the Shannon entropy so that the illumination-independent image of the respective frame is obtained. During the road detection, road sample points are extracted with the random sampling method. A confidence interval classifier of the road is established, which could separate a road from its background. This paper is based on public datasets and video sequences, which records roads of Chinese cities, suburbs, and schools in different traffic scenes. The author compares the method proposed in this paper with other sound video-based road detection methods and the results show that the method proposed in this paper can achieve a desired detection result with high quality and robustness. Meanwhile, the whole detection system can meet the real-time processing requirement.
Reasonable transportation network layoutsarecritical for optimizing a comprehensive transport system. With the gradual development of a transportation industry from quantitative expansion to structural optimization, and transformation of various transportation modes from independent operation to integrated development, traditional comprehensive transport planning theories and methods have not adapted. In thispaper, a new planning concept is proposed from the perspective of economic equilibrium with theaim ofoptimizing a supply structure for a comprehensive transport passenger transportation corridor. An in-depth analysis was conducted of the internal mechanism of the dynamic equilibrium between supply and demand of this corridor,wherein the maximum of the globaltransportation demand subjectcustomer surplus wastaken as a target function, respective interest functions of a demand subject and a supply subject served as constraints to quantitatively optimize the supply structure of the passenger transportation corridor in comprehensive transport, and a Gradient Descent algorithmwasdesigned. The results show that the proposed model better reflectstheeconomic operation mechanism of a passenger transportation market in a comprehensive transport corridor (CTC), and prove that the supply structure of CTC is closely related to passenger flow, travel value distribution, a supply subject's scale rate of return,and travel time. These research results have important academic values in terms of improving passenger transportation corridor structure optimization in region-specific comprehensive transport that conforms to a market economy mechanism. This concept can be extended from single corridor planning to point-to-point and door-to-door transportation supply structure planning, andto comprehensive transport network planning and urban transportation planning without loss of generality.
We present herein a unique concept of multifrequency induced-charge electroosmosis (MICEO) actuated directly on driving electrode arrays, for highly-efficient simultaneous transport and convective mixing of fluidic samples in microscale ducts. MICEO delicately combines transversal AC electroosmotic vortex flow, and axial traveling-wave electroosmotic pump motion under external dual-Fourier-mode AC electric fields. The synthetic flow field associated with MICEO is mathematically analyzed under thin layer limit, and the particle tracing experiment with a special powering technique validates the effectiveness of this physical phenomenon. Meanwhile, the simulation results with a full-scale 3D computation model demonstrate its robust dual-functionality in inducing fully-automated analyte transport and chaotic stirring in a straight fluidic channel embedding double-sided quarter-phase discrete electrode arrays. Our physical demonstration with multifrequency signal control on nonlinear electroosmosis provides invaluable references for innovative designs of multifunctional on-chip analytical platforms in modern microfluidic systems.
A distributed energy system (DES) using controlled power electronics converters delivers power to loads, via conventional, as well as a number of renewable, energy sources. However, stability concerns retard the integration of power electronics converters into an existing DES. Therefore, due to the high penetration of power converters, the overall network analysis of DES is becoming increasingly difficult. Impedance-based DES modeling emerged as an effective technique as it reduces the system into source and load subsystems and offers easier analysis of the dynamic interactions between them. These models can be obtained using either analytical calculations, simulations, or experimental measurements. In this work, firstly, a line-to-line current injection technique is used for the measurement of alternating current (AC) impedances. Since it requires repeated injections, a -domain impedance measurement methodology based upon a set of independent perturbations and measurements is proposed. The perturbation is injected via a sweep signal which is preprocessed by the digital signal processor (DSP) prior to injection. The reference frame is synchronized with the three-phase AC system using a low-bandwidth phase-locked loop (PLL). The close matching of impedance parameters measured in simulation using the proposed approach with those obtained using analytical expressions and the line-to-line current injection technique verifies the effectiveness of the approach. Furthermore, the method was also implemented experimentally, and the close matching of the results with the analytical and simulation results validates the overall modeling and measurement procedure.