Bing Yue

Dr. Bing Yue


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 August 2024 in Materials
Verified
Journal Article
Open access
PDF file
HYHeng Yang
Heng Yang
ZQZengzhen Qian
Zengzhen Qian
BYBing Yue
Bing Yue
ZXZilu Xie
Zilu Xie
Aeolian sand is distributed worldwide, exhibiting poor grading, low cohesion, and loose structure. Infrastructure construction in desert areas sometimes requires stabilization of the sand, with cement as the primary curing agent. This study first employed orthogonal experiments to evaluate critical factors, e.g., curing time, cement dosage, and water dosage, affecting the unconfined compressive strength (UCS) of the aeolian sand stabilized with cement (ASC). Each of the aforementioned factors were set at five levels, namely curing time (7, 14, 28, 60, and 90 days), cement dosage (3%, 5%, 7%, 9%, and 11%), and water dosage (3%, 6%, 9%, 12%, and 15%), respectively. The water and cement dosages were percentages of the mass of the natural aeolian sand. The results indicated that the sensitivity of the influencing factors on the UCS of ASC was cement dosage, curing time, and water dosage in descending order. The UCS of ASC positively correlated with curing time and cement dosage, while it first increased and then decreased with the water dosage increase. The optimal conditions were 90 days’ curing time, 11% cement dosage, and 9% water dosage. The microscopic analyses of ASC using optical microscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD) revealed that hydration products enhanced strength by bonding loose particles and filling pores, thereby improving compaction. The quantity and compactness of hydration products in the aeolian–cement reaction system increased with the increases in cement dosage and curing time, and low water dosage inhibited the hydration reaction. This study can provide insights into the stabilization mechanism of aeolian sand, aiding infrastructure development in desert regions.

29 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
BYBing Yue
Bing Yue
ZZZiye Zhao
Ziye Zhao
ZQZengzhen Qian
Zengzhen Qian
In this study, cement, zeolite powder and three industrial by-products (blast furnace slag, steel slag, and fly ash) were selected as additives to study their effects on the swelling potential of red clay with different curing ages and dosages. At the same time, the mechanism of additives reducing the swelling potential of red clay was analyzed by scanning electron microscope (SEM) and X-ray fluorescence (XRF) tests. The X-ray diffraction (XRD) test was used to detect the clay mineral content of the red clay specimens before and after the modification to determine the change in the clay mineral content of the specimens. The direct shear test was used to explore the influence of additives on the strength of red clay. The results show that with 9% cement content, the no loading swelling potential of specimens can be reduced by 82.5% under 28 days of curing, and the cohesion of the specimens can be greatly increased by 82%. However, the specimens with cement have an increase in no loading swelling potential under the condition of no curing. In contrast, when steel slag is used as an additive to modify the swelling properties of red clay, the swelling potential can be reduced without curing, but the addition of steel slag will reduce the cohesive strength of specimens. XRD testing shows that the clay mineral composition in cement-modified specimens and steel slag-modified specimens experienced a relative change, the relative content of montmorillonite and illite decreased, and the relative content of kaolinite increased. Combined with SEM and XRF test results, it is concluded that cement’s reduction in the swelling potential of red clay depends on pozzolanic reaction products filling the pores in specimens and bonding clay particles, so as to reduce the permeability of red clay and increase the resistance during swelling. The addition of cement can also convert hydrophilic clay minerals into nonhydrophilic clay minerals. Compared with cement, the reduction in swelling potential caused by steel slag mainly depends on the adsorption of ions to reduce the adsorption of water molecules on the surface of clay slices.

15 December 2023 in Advances in Civil Engineering
Verified
Journal Article
Open access
PDF file
XLXianlong Lu
Xianlong Lu
QYQiang Yu
Qiang Yu
JXJiayu Xu
Jiayu Xu
BYBing Yue
Bing Yue
MSMingqiang Sheng
Mingqiang Sheng
Because of the existence of clay minerals such as montmorillonite in red clay, the strength of red clay decreases significantly as water content increases. This study aims to improve the strength of red clay by using three different kinds of industrial solid waste powder, i.e., steel slag (SS) powder, fly ash (FA), and ground-granulated blast furnace slag (GGBS). At the same time, the ordinary Portland cement (OPC) was selected as a comparison of the improvement effect on the strength of red clay modified by the aforementioned industrial solid waste powder. The properties of the red clay and the industrial solid waste powder were documented comprehensively. The unconfined compressive strength (UCS) tests were conducted on the specimens of the red clay and the red clay modified by the OPC, SS, FA, and GGBS, which had been cured for 3, 7, and 21 days at a temperature of 25°C, respectively. The results showed that the strength of red clay can be significantly improved by the three kinds of industrial solid waste powder. After a 21-day curing period, the experimental results showed that the UCS of the red clay modified by 7% SS, 5% FA, and 5% GGBS increased by 252%, 131%, and 140% compared to that of the red clay without modification. However, the modification effects of the SS, FA, and GGBS on the red clay were generally inferior to that of the OPC. By observing the microstructures of the modified clay, the mechanism of industrial solid waste powder and cement improving the strength of the red clay was analyzed. The findings in this study can provide a reference for improving subgrade strength by a soil-modification method in road constructions.

25 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
ZXZilu Xie
Zilu Xie
ZQZengzhen Qian
Zengzhen Qian
XLXianlong Lu
Xianlong Lu
BYBing Yue
Bing Yue
WSWendi Su
Wendi Su
MTMengze Tian
Mengze Tian
This study developed a full solid waste-based cementitious material (ISWs-CM) using steel slag (SS), ground granulated blast furnace slag (GGBFS), phosphorus slag (PS), carbide slag (CS), and desulfurized gypsum (DG) to completely replace cement. A two-layer optimization strategy, combining three chemical moduli and simplex lattice experiments, was employed to determine the proportion and to investigate the impact of proportions on the uniaxial compressive strength of mortar. As an application case, the ISWs-CM with the optimal proportion was employed to stabilize aeolian sand, and its effectiveness as a cement substitute and the underlying mechanisms were investigated. The results indicated that the ISW proportion that maximized the strength of the mortar was SS:GGBFS:PS:CS = 5:20:20:40. The strength of the mortar was enhanced when the proportion of GGBFS exhibiting the highest reactivity was increased and also increased initially and then decreased with an increase in CS when the dosage of GGBFS was fixed. The aeolian sand stabilized by ISW-CM exhibited higher strength than that stabilized with cement. The greater number and variety of hydration products resulted in denser connections and encapsulation of sand particles, which highlights the synergistic effect of ISWs and the potential of ISW-CM as a cement replacement across diverse applications including aeolian sand stabilization.

1 April 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
ZXZilu Xie
Zilu Xie
ZQZengzhen Qian
Zengzhen Qian
HWHao Wang
Hao Wang
YQYingzhe Qi
Yingzhe Qi
BYBing Yue
Bing Yue
Aeolian sand serves as the principal foundation material for construction in desert regions, yet its stabilization predominantly relies on cement, presenting critical carbon emission challenges. This study developed a cementitious material utilizing complementary industrial solid wastes (ISWs)—steel slag (SS), ground granulated blast-furnace slag (GGBFS), phosphorus slag (PS), and carbide slag (CS)—based on clinker three chemical moduli (TCM) and simplex lattice design, aiming to replace cement for aeolian sand stabilization. ISW dosage effects on stabilized sand strength and mechanical properties were investigated, with stabilization mechanisms studied via phase and microstructural analysis. Results demonstrated that GGBFS exerted the most significant positive influence on the strength of stabilized sand. The optimal proportion was determined as SS:GGBFS:PS:CS = 5:35:20:40, achieving strength comparable to cement-stabilized aeolian sand in the literature. The elastic modulus and ductility of stabilized sand exhibited linear positive and exponential negative correlation with uniaxial compressive strength. The hydration products of ISWs, including C(-A)-S-H gel and ettringite similar to clinker, effectively enhanced interparticle bonding strength and pore-filling capacity. ISW proportions governed the composition and distribution of hydration products, thereby modulating microstructural density and strength, ultimately dictating macroscopic performance variations. The conclusions provide an environmentally friendly solution for aeolian sand stabilization in desert regions.

14 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
WQWei Qiao
Wei Qiao
BYBing Yue
Bing Yue
ZLzhihua luo
zhihua luo
SZShengli Zhu
Shengli Zhu
LLLei Li
Lei Li
Biao LuoBiao Luo
Biao Luo
The utilization of steel slag (SS), fly ash (FA), and ground granulated blast furnace slag (GGBFS) as soil additives in construction represents a critical approach to achieving resource recycling of these industrial by-products. This study aims to activate the SS-FA-GGBFS composite with a NaOH solution and Na2CO3 and employ the activated solid waste blend as an admixture for lateritic clay modification. By varying the concentration of the NaOH solution and the dosage of Na2CO3 relative to the SS-FA-GGBFS composite, the effects of these parameters on the activation efficiency of the composite as a lateritic clay additive were investigated. Results indicate that the NaOH solution activates the SS-FA-GGBFS composite more effectively than Na2CO3. The NaOH solution significantly promotes the depolymerization of aluminosilicates in the solid waste materials and the generation of Calcium-Silicate-Hydrate and Calcium-Aluminate-Hydrate gels. In contrast, Na2CO3 relies on its carbonate ions to react with calcium ions in the materials, forming calcium carbonate precipitates. As a rigid cementing phase, calcium carbonate exhibits a weaker cementing effect on soil compared to Calcium-Silicate-Hydrate and Calcium-Aluminate-Hydrate gels. However, excessive NaOH leads to inefficient dissolution of the solid waste and induces a transformation of hydration products in the modified lateritic clay from Calcium-Silicate-Hydrate and Calcium-Aluminate-Hydrate to Sodium-Silicate-Hydrate and Sodium-Aluminate-Hydrate, which negatively impacts the strength and microstructural compactness of the alkali-activated solid waste composite-modified lateritic clay.