Shengli Zhu

Dr. Shengli Zhu


Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 July 2025 in Materials
Verified
Journal Article
Open access
PDF file
WQWei Qiao
Wei Qiao
BYBing Yue
Bing Yue
ZLzhihua luo
zhihua luo
SZShengli Zhu
Shengli Zhu
LLLei Li
Lei Li
Biao LuoBiao Luo
Biao Luo
The utilization of steel slag (SS), fly ash (FA), and ground granulated blast furnace slag (GGBFS) as soil additives in construction represents a critical approach to achieving resource recycling of these industrial by-products. This study aims to activate the SS-FA-GGBFS composite with a NaOH solution and Na2CO3 and employ the activated solid waste blend as an admixture for lateritic clay modification. By varying the concentration of the NaOH solution and the dosage of Na2CO3 relative to the SS-FA-GGBFS composite, the effects of these parameters on the activation efficiency of the composite as a lateritic clay additive were investigated. Results indicate that the NaOH solution activates the SS-FA-GGBFS composite more effectively than Na2CO3. The NaOH solution significantly promotes the depolymerization of aluminosilicates in the solid waste materials and the generation of Calcium-Silicate-Hydrate and Calcium-Aluminate-Hydrate gels. In contrast, Na2CO3 relies on its carbonate ions to react with calcium ions in the materials, forming calcium carbonate precipitates. As a rigid cementing phase, calcium carbonate exhibits a weaker cementing effect on soil compared to Calcium-Silicate-Hydrate and Calcium-Aluminate-Hydrate gels. However, excessive NaOH leads to inefficient dissolution of the solid waste and induces a transformation of hydration products in the modified lateritic clay from Calcium-Silicate-Hydrate and Calcium-Aluminate-Hydrate to Sodium-Silicate-Hydrate and Sodium-Aluminate-Hydrate, which negatively impacts the strength and microstructural compactness of the alkali-activated solid waste composite-modified lateritic clay.

25 September 2026 in Materials
Verified
Journal Article
Open access
PDF file
BYBing Yue
Bing Yue
QZQiong Zhang
Qiong Zhang
JHJiaxing Hu
Jiaxing Hu
SZShengli Zhu
Shengli Zhu
WQWei Qiao
Wei Qiao
HLHaitao Li
Haitao Li
Solid waste-based binder-stabilized laterite is prone to progressive deterioration under multiple coupled environmental factors in practical engineering applications. Conventional compression and direct shear tests fail to accurately characterize the gradient deterioration pattern of stabilized laterite specimens. In this study, a multi-factor test scheme was designed using response surface methodology, with wet–dry cycle number, initial humic acid content, and magnesium sulfate solution concentration selected as environmental factors. Continuous drilling resistance–drilling depth curves of stabilized laterite specimens were obtained using a drilling resistance measurement system, thereby quantitatively determining the deterioration depth and indirectly characterizing structural integrity via the drilling resistance in the stable drilling stage. Scanning electron microscopy observations were used to reveal the microscopic deterioration mechanism of stabilized laterite under the effects of environmental factors. The results of the regression show that the micro-drilling resistance in the stable drilling stage of undeteriorated stabilized laterite has a significant linear correlation with shear strength, indicating that micro-drilling resistance, as an indirect index of specimen integrity, also has potential for application in evaluating the strength of stabilized laterite. All three environmental factors increase the deterioration depth of stabilized laterite; wet–dry cycles exert the most significant effect and exhibit a statistically significant interaction within the investigated experimental domain with humic acid content, followed by magnesium sulfate concentration. For stabilized laterite subjected to wet–dry cycles and sulfate attacks, there exists a change point depth on the drilling resistance curve. Below this depth, the average micro-drilling resistance of the interior soil is mainly governed by the initial humic acid content. Microscopically, humic acid particles form weakly cemented zones in surrounding areas, which gradually evolve into preferential flow paths under wet–dry cycles, accelerating water infiltration and expanding deterioration depth. Magnesium sulfate crystallizes within pores to generate ettringite and other products, inducing extrusion stress on the cemented structure and further aggravating soil loosening and microcrack propagation.

20 May 2025 in Materials
Verified
Journal Article
Open access
PDF file
WQWei Qiao
Wei Qiao
KDKuncheng Dai
Kuncheng Dai
DLDaming Lin
Daming Lin
BYBing Yue
Bing Yue
BSBidi Su
Bidi Su
ZLzhihua luo
zhihua luo
Lateritic clay is widely distributed in southern China, and its strength is greatly affected by water content. The elevated moisture content in lateritic clay during monsoon periods frequently results in insufficient shear strength for standard engineering applications. Large quantities of solid waste, including steel slag, fly ash, and granulated blast furnace slag, are produced as industrial by-products. This paper is based on the backfilling resource utilization of steel slag, fly ash, and ground-granulated blast-furnace slag as lateritic clay improvement admixtures, along with the stress–strain behavior, strength characteristics, and microstructure of steel-slag-modified lateritic clay, fly-ash-modified lateritic clay, and ground-granulated blast-furnace slag-modified lateritic clay, by combining uniaxial compression tests, straight shear tests, and scanning electron microscopy observation. The experimental results were analyzed to determine the appropriate dosages of three kinds of solid waste and their mechanisms in lateritic clay modification. The results indicate that the unconfined compressive strength of SS-modified lateritic clay exhibited an increase with an increase in SS dosage in the range of 1–7%, the unconfined compressive strength of FA-modified lateritic clay showed an increase with an increase in FA dosage in the range of 1–5%, and the unconfined compressive strength of GGBFS-modified lateritic clay increased with an increase in the use of GGBFS in the range of 1–5%. Under the condition of a 7-day curing age, the unconfined compressive strength of lateritic clay modified with 7% SS increased by approximately 397%, while that modified with 5% FA and 5% GGBFS exhibited increases of about 187% and 185%, respectively. The stress–strain relationship of fly-ash and blast-furnace slag-modified lateritic clays showed elastic–plastic deformation. But the stress–strain behavior of steel-slag-modified lateritic clay at a steel slag dose greater than 5% and a maintenance age greater than 7 days showed elastic deformation. Analyzing the SEM images shows that the more hydration products are generated, the relatively higher the unconfined compressive strength of modified lateritic clay is, and the form of deformation of modified lateritic clay is closer to elastic deformation. Through comparative analysis of modified lateritic clay samples, this study elucidates the property-altering mechanisms of waste powder additives, guiding their engineering utilization.

1 August 2026 in Engineering Research Express
Verified
Journal Article
Closed access
PDF file
SZShengli Zhu
Shengli Zhu
WQWei Qiao
Wei Qiao
DLDaming Lin
Daming Lin
SQShumao Qiu
Shumao Qiu
YLYakun Li
Yakun Li
ZLzhihua luo
zhihua luo
Aeolian sand is widely distributed in arid and semi-arid regions, but its loose structure and low cohesion limit its direct engineering use. This study investigates the stabilization of aeolian sand using alkali-activated steel slag—fly ash system. Single-factor tests and an L25 (5 4 ) orthogonal design were conducted to evaluate the effects of steel slag content, fly ash content, NaOH dosage, and moisture content on shear strength and unconfined compressive strength. SEM, XRD, and FTIR analyses were further used to clarify the solidification mechanism. The results show that steel slag content is the dominant factor controlling shear strength and strength parameters, followed by NaOH dosage and fly ash content, while moisture content has the weakest influence. The optimal mixture was 12% steel slag, 10% fly ash, 4% NaOH, and 12% moisture. Under this condition, cohesion and internal friction angle reached 198.2 kPa and 51.1°, respectively, and UCS reached 2450 kPa at 7 d and 4860 kPa at 28 d. The strength improvement was mainly attributed to the formation of alkali-activated gels, pore filling, and enhanced interparticle bonding.