We report on an optical setup to generate multi-Bessel beam profiles combining a refractive axicon and a spatial light modulator. Based on their particular beam profile, Bessel beams offer advantageous properties for micro drilling processes and internal volume processing, especially for transparent materials. In addition, the laser power of industrial, ultrashort pulsed lasers has increased significantly over the last few years, offering the possibility for highly efficient processes using multi-spot profiles. Our optical concept combines the dynamic possibilities of beam splitting using a spatial light modulator with the benefits of Bessel beams, which facilitates multi-Bessel beam processing. Beside the simulation and experimental evaluation of the generated multi-Bessel beams, we exemplify the applicability of the developed module for the perforation of thin metal foils by micro drilling.
Laser nanostructuring of thin films with ultrashort laser pulses is widely used for nanofabrication across various fields. A crucial parameter for optimizing and understanding the processes underlying laser processing is the absorbed laser fluence, which is essential for all damage phenomena such as melting, ablation, spallation, and delamination. While threshold fluences have been extensively studied for single compound thin films, advancements in ultrafast acoustics, magneto-acoustics, and acousto-magneto-plasmonics necessitate understanding the laser nanofabrication processes for functional multilayer films. In this work, we investigated the thickness dependence of ablation and delamination thresholds in Ni/Au bilayers by varying the thickness of the Ni layer. The results were compared with experimental data on Ni thin films. Additionally, we performed femtosecond time-resolved pump-probe measurements of transient reflectivity in Ni to determine the heat penetration depth and evaluate the melting threshold. Delamination thresholds for Ni films were found to exceed the surface melting threshold suggesting the thermal mechanism in a liquid phase. Damage thresholds for Ni/Au bilayers were found to be significantly lower than those for Ni and fingerprint the non-thermal mechanism without Ni melting, which we attribute to the much weaker mechanical adhesion at the Au/glass interface. This finding suggests the potential of femtosecond laser delamination for nondestructive, energy-efficient nanostructuring, enabling the creation of high-quality acoustic resonators and other functional nanostructures for applications in nanosciences.
In times of digitalization, multilayer composite materials became central components in an increasing number of application fields. Thus, there is a need for optimization of the cost-intensive and time-consuming processing of multilayer composites. In this contribution, an ultrashort pulse laser-based method is presented for precise and flexible ablation of a printed circuit board base material. Therefore, an 800 nm Gaussian laser beam was transformed into a Bessel beam by an axicon to get a small spot size and an ablation result with a high aspect ratio. The influence of the average laser power, the number of exposure cycles, and the pulse duration on the geometry as well as the surface quality of ablated structures was investigated and compared to Gaussian beam ablation. Furthermore, it is shown that the results can be transferred to microdrilling processes. With the presented method, it was possible to ablate the copper top layer of the printed circuit boards as well as the FR4 layer below with a precisely adjustable depth.
4 February 2025 in Shape Memory and Superelasticity
Ultrashort pulse lasers are common tools for surface structuring and marking of components. However, even finest structures generated by ultrashort laser processes may affect the mechanical properties of components. In the present work, the effects of laser-induced surface modifications on the fatigue behavior of pickled nickel titanium shape memory wires are investigated. Ultrafast Bessel beams have been utilized to create small microstructure-covered grooves on a defined area on the wire’s shell surface. Subsequently, the wires underwent fatigue testing until failure. The impact of laser processing on fatigue behavior and the resulting fracture surfaces were examined using scanning electron microscopy. It was found that laser defects generated with low fluences have a negligible impact on fatigue lives, as microcracks, which may cause failure, typically initiate at other more severe types of surface defects. However, we identified certain laser scanning strategies and other conditions like increased fluences, which can affect wire surface regions to become prone to fatigue crack initiation, resulting in reduced service lives.
Ultrashort laser pulses are used to generate Laser-Induced Periodic Surface Structures (LIPSS). To apply LIPSS on small confined areas, the laser source must be focused to a small spot diameter. Contrary to commonly used high numerical aperture objectives, we present a Bessel beam-based approach to produce LIPSS covered lines with a width of 4 to 10 µm. Therefore, an 800 nm Ti:Sa-laser with a pulse duration of 110 fs and a repetition rate of 5000 Hz was used. The setup convinces with an extended depth of focus. Thus, high reproducibility of the process was proven, while no focus control and no specific requirements for the surface quality are needed. The applicability of this method is demonstrated by structuring the shell surface of nickel–titanium wires.