In the fifth-generation (5G) mobile communication system, various service requirements of different communication environments are expected to be satisfied. As a new evolution network structure, heterogeneous network (HetNet) has been studied in recent years. Compared with homogeneous networks, HetNets can increase the opportunity in the spatial resource reuse and improve users' quality of service by developing small cells into the coverage of macrocells. Since there is mutual interference among different users and the limited spectrum resource in HetNets, however, efficient resource allocation (RA) algorithms are vitally important to reduce the mutual interference and achieve spectrum sharing. In this article, we provide a comprehensive survey on RA in HetNets for 5G communications. Specifically, we first introduce the definition and different network scenarios of HetNets. Second, RA models are discussed. Then, we present a classification to analyze current RA algorithms for the existing works. Finally, some challenging issues and future research trends are discussed. Accordingly, we provide two potential structures for 6G communications to solve the RA problems of the next-generation HetNets, such as a learning-based RA structure and a control-based RA structure. The goal of this article is to provide important information on HetNets, which could be used to guide the development of more efficient techniques in this research area.
5 February 2024 in IEEE Communications Surveys & Tutorials
Communication in millimeter wave (mmWave) and even terahertz (THz) frequency bands is ushering in a new era of wireless communications. Beam management, namely initial access and beam tracking, has been recognized as an essential technique to ensure robust mmWave/THz communications, especially for mobile scenarios. However, narrow beams at higher carrier frequency lead to huge beam measurement overhead, which has a negative impact on beam acquisition and tracking. In addition, the beam management process is further complicated by the fluctuation of mmWave/THz channels, the random movement patterns of users, and the dynamic changes in the environment. For mmWave and THz communications toward 6G, we have witnessed a substantial increase in research and industrial attention on artificial intelligence (AI), reconfigurable intelligent surface (RIS), and integrated sensing and communications (ISAC). The introduction of these enabling technologies presents both open opportunities and unique challenges for beam management. In this paper, we present a comprehensive survey on mmWave and THz beam management. Further, we give some insights on technical challenges and future research directions in this promising area.
The Global Navigation Satellite System (GNSS) cannot achieve accurate positioning and navigation in the indoor environment. Therefore, efficient indoor positioning technology has become a very active research topic. Bluetooth beacon positioning is one of the most widely used technologies. Because of the time-varying characteristics of the Bluetooth received signal strength indication (RSSI), traditional positioning algorithms have large ranging errors because they use fixed path loss models. In this paper, we propose an RSSI real-time correction method based on Bluetooth gateway which is used to detect the RSSI fluctuations of surrounding Bluetooth nodes and upload them to the cloud server. The terminal to be located collects the RSSIs of surrounding Bluetooth nodes, and then adjusts them by the RSSI fluctuation information stored on the server in real-time. The adjusted RSSIs can be used for calculation and achieve smaller positioning error. Moreover, it is difficult to accurately fit the RSSI distance model with the logarithmic distance loss model due to the complex electromagnetic environment in the room. Therefore, the back propagation neural network optimized by particle swarm optimization (PSO-BPNN) is used to train the RSSI distance model to reduce the positioning error. The experiment shows that the proposed method has better positioning accuracy than the traditional method.
11 January 2022 in IEEE Transactions on Communications
The energy efficiency (EE) of femtocells is always limited by the surrounding radio environments in heterogeneous networks (HetNets), such as walls and obstacles. In this paper, we propose to deploy reconfigurable intelligent surfaces (RISs) to improve the EE of femtocells. However, perfect channel state information is more difficult to obtain due to the passive characteristics of RISs and non-cooperative relationship between different tiers. Besides, the low-cost transceivers and reflecting units suffer nontrivial hardware impairments (HWIs) due to the hardware limitations of practical systems. To this end, we investigate a realistic robust beamforming design based on max-min fairness for an RIS-aided HetNet under channel uncertainties and residual HWIs. The joint optimization of transmit beamforming vectors of femto base stations (FBSs) and the phase-shift matrices of RISs is formulated as a non-convex problem to maximize the minimum EE of the femtocell subject to the constraints of the maximum transmit power of FBSs, the quality of service of users, and unit modulus phase-shift constraints of RISs. We develop an iterative block coordinate descent-based algorithm which exploits the semi-definite relaxation, the S-procedure, and the singular value decomposition method. Simulation results reveal that the proposed algorithm outperforms existing algorithms in terms of fairness, EE, and outage probability.
4 July 2022 in IEEE Transactions on Cognitive Communications and Networking
To mitigate the effects of shadow fading and obstacle blocking, reconfigurable intelligent surface (RIS) has become a promising technology to improve the signal transmission quality of wireless communications by controlling the reconfigurable passive elements with less hardware cost and lower power consumption. However, accurate, low-latency and low-pilot-overhead channel state information (CSI) acquisition remains a considerable challenge in RIS-assisted systems due to the large number of RIS passive elements. In this paper, we propose a three-stage joint channel decomposition and prediction framework to acquire CSI. The proposed framework exploits the two-timescale property that the base station (BS)-RIS channel is quasi-static and the RIS-user equipment (UE) channel is fast time-varying. Specifically, in the first stage, we use the full-duplex technique to estimate the channel between a BS’s specific antenna and the RIS, addressing the critical scaling ambiguity problem in the channel decomposition. We then design a novel deep neural network, namely, the sparse-connected long short-term memory (SCLSTM), and propose a SCLSTM-based algorithm in the second and third stages, respectively. The algorithm can simultaneously decompose the BS-RIS channel and RIS-UE channel from the cascaded channel and capture the temporal relationship of the RIS-UE channel for prediction. Simulation results show that our proposed framework has lower pilot overhead than the traditional channel estimation algorithms, and the proposed SCLSTM-based algorithm can also achieve more accurate CSI acquisition robustly and effectively.
14 October 2020 in IEEE Wireless Communications Letters
Energy efficiency (EE) is an important performance metric in communication systems. However, to the best of our knowledge, the energy-efficient resource allocation (RA) problem in non-orthogonal multiple access enabled backscatter communication networks (NOMA-BackComNet) comprehensively considering the user's quality of service (QoS) has not been investigated. In this letter, we present the first attempt to solve the EE-based RA problem for NOMA-BackComNet with QoS guarantee. The objective is to maximize the EE of users subject to the QoS requirements of users, the decoding order of successive interference cancellation and the reflection coefficient (RC) constraint, where the transmit power of the base station and the RC of the backscatter device are jointly optimized. To solve this non-convex problem, we develop a novel iteration algorithm by using Dinkelbach's method and the quadratic transformation approach. Simulation results verify the effectiveness of the proposed scheme in improving the EE by comparing it with the other schemes.