Among the vast array of technologies available for surface modification of materials, sputtering emerges as one of the most versatile methods through coating deposition. Included in the family of physical vapor deposition (PVD) techniques, sputtering allows the production of coatings with a great variety of characteristics, based on a bottom-up approach that forms coatings from individual species (atoms or ions). This versatility is achieved by controlling: (i) the layer architecture, from monolithic to multilayers, (ii) the structures, from amorphous to nanocrystalline or nanocomposite, until highly crystallized, including epitaxial; (iii) the morphologies, from very porous through columnar or zig-zag to very dense and featureless; (iv) the chemical composition, allowing the deposition of metallic, polymeric, ceramic or composite materials types. In this paper, after a brief introduction of sputtering as a deposition technology, we will review the application of sputtering for depositing protective coatings to which an extra functionality is provided: (a) aesthetic color; (b) high-temperature lubrication; and (c) temperature sensing ability.
A combinatory deposition was performed by direct current magnetron sputtering (DCMS) to develop Ti1-xAlxN thin films with different Ti/Al ratios. The crystal structure as a function of the x was studied by X-ray diffraction, and sheet resistance response was measured up to 200˚C. From x = 0.16 to x = 0.56, the film shows an fcc phase with Al in solid solution in the TiN matrix, whilst from x ≥ 0.69, a mixture of hcp (AlN) and fcc phases is observed. A negative temperature coefficient (NTC) thermistor behavior was found from x = 0.21 onwards, and a maximum sensitivity β of 1600 K was observed for x = 0.56 and 0.69. One fcc sample (x = 0.46) was selected to analyze the chemical states by X-ray photonelectron spectroscopy and the impedance behavior with the temperature by electrical impedance spectroscopy. The crystal structure, bond states and impedance analysis were compared with an AlN thin film. The conduction mechanism for x = 0.46 is based upon electron hopping, and the resistance of the grain boundary is more relevant at low temperatures. We demonstrate that it is possible to use TiAlN as an NTC-thermistor with different crystal structures and chemical compositions.