The effective and rapid detection of Fire Blight, an important bacterial disease caused by the quarantine pest E.amylovora, is crucial for today’s horticulture. This study explored the application of non-invasive proximal hyperspectral remote sensing (RS) in order to differentiate the healthy (H), infected (I) and dry (D) leaves of apple trees. Analysis of variance was employed in order to determine which hyperspectral narrow spectral bands exhibited the most significant differences. Spectral signatures for the range of 400–2500 nm were acquired with Thermo Scientific Evolution 220 and iS50NIR spectrometers. The selected spectral bands were then used to evaluate several RS indices, including ARI (Anthocyanin Reflectance Index), RDVI (Renormalized Difference Vegetation Index), MSR (Modified Simple Ratio) and NRI (Nitrogen Reflectance Index), for Fire Blight detection in apple tree leaves. Furthermore, a new index was proposed, namely QFI. The spectral indices were tested on apple trees infected by Fire Blight in a quarantine greenhouse. Results indicated that the short-wavelength infrared (SWIR) band located at 1450 nm was able to distinguish (I) and (H) leaves, while the SWIR band at 1900 nm differentiated all three leaf types. Moreover, tests using the Pearson correlation indicated that ARI, MSR and QFI exhibited the highest correlations with the infection progress. Our results prove that our hyperspectral remote sensing technique is able to differentiate (H), (I) and (D) leaves of apple trees for the reliable and precise detection of Fire Blight.
25 January 2016 in Polish Journal of Environmental Studies
Anthropogenic lake eutrophication can allow toxic cyanobacteria (blue-green algae) to grow uncontrollably, resulting in harmful algal blooms with potentially serious economic and health-related impacts. Development of monitoring methods for predicting bloom events is an important goal of monitoring programs and is one of the fundamental interests to those examining the ecology of aquatic ecosystems. Implementation of new monitoring methods complies with the provisions of national and community laws for the protection and restoration of good chemical and ecological status of water reservoirs and dependent ecosystems, and allows for the fulfilment of obligations of legislation policy of European Union (WFD 2000/60/EC) and Polish Water Law Acts, and The Environmental Protection Law. Our paper investigates a comparison between aerial remote sensing methods and currently used technology, and presents advantages of the proposed monitoring as an accurate, flexible, cheap, and fast method of detecting and predicting eutrophication and therefore cyanobacteria bloom in water reservoirs, taking into account the complexity and dynamics of an ecosystem. The article also states that aerial remote sensing technology represents an innovative tool strongly supporting traditional methods for continuous monitoring application and an early warning system against algal bloom. Therefore, it is reasonable to continue remote sensing methods development in order to precisely determine the cyanobacteria blooms in lakes. It is also necessary to improve satellite algorithms and the use of both satellite images and those taken from unmanned aerial vehicles (UAVs) and manned planes.
This paper outlines effect of the mix composition on mechanical properties of high–strength concrete based on aggregate size like in of Reactive Powder Concrete (RPC) but without fiber reinforcement. The main purpose which guided the authors choosing proportion of water and superplasticizer (SP) was to achieve a similar consistency in the test slump for various concrete mix. Test results for 3 groups of superplasticizers, designated as D – with chemical base – acrylic polymer, V – with chemical base – polycarboxylate ether, P – with chemical base – modified polycarboxylates, two cement groups, designated as Cem A – with fineness Blaine 3980 cm 2/g, Cem B – with fineness Blaine 4430 cm 2/g and 2 types of aggregate: basalt and granite were presented. After curing for 1, 7 and 28 days samples were tested for compressive strength and flexural tensile strength. The article also presents the study of the elemental composition and structure of the SP with the use of the SEM electron microscope. The amount of solid particles in the SP was also determined by the water vaporization. The assumption of the paper was to maintain the consistency of the mixture at the S2 level according to the Eurocode standard. The paper proposes a method based on SEM analysis in order to select a superplasticizer with the best ductility parameters, and the best results of the compressive and flexural tensile strength of concrete samples were obtained. The best results for compressive strength after 28 days are obtained for concrete series with the polycarboxylate ether superplasticizer and modified polycarboxylate ether superplasticizer in combination with the use of type A cement and it is greater than for the concrete series with type B cement by 11.7%.
Advances in remote sensing technologies have revolutionized the monitoring of soil conditions in forest ecosystems, providing valuable insights into soil moisture, nutrient content, and degradation without requiring physical access to remote areas. This article explores the application of key techniques, including satellite-based L-band radiometry, UAV-enabled LiDAR, and visible–NIR spectroscopy, in assessing forest soil properties. Challenges such as canopy interference, spatial resolution limitations, and data validation are discussed, alongside innovative solutions like machine learning and high-resolution digital elevation models. Case studies highlight the effectiveness of remote sensing in addressing environmental and forestry challenges, such as tracking the effects of climate change, logging, and erosion. By integrating advanced imaging technologies with ground-based observations, remote sensing supports sustainable forest management, conservation practices, and ecological research. Future developments in sensor technology, data integration, and machine learning hold promise for even greater precision and scalability in forest soil monitoring.
Soil moisture content (SMC) is an important element of the environment, influencing water availability for plants and atmospheric parameters, and its monitoring is important for predicting floods or droughts and for weather and climate modeling. Optical methods for measuring soil moisture use spectral reflection analysis in the 350–2500 nm range. Remote sensing is considered to be an effective tool for monitoring soil parameters over large areas and to be more cost effective than in situ measurements. The aim of this study was to assess the SMC of bare soil on the basis of hyperspectral data from the ASD FieldSpec 4 Hi-Res field spectrometer by determining remote sensing indices and visualization based on multispectral data obtained from UAVs. Remote sensing measurements were validated on the basis of field humidity measurements with the HH2 Moisture Meter and ML3 ThetaProbe Soil Moisture Sensor. A strong correlation between terrestrial and remote sensing data was observed for 7 out of 11 selected indexes and the determination coefficient R2 values ranged from 67%– 87%. The best results were obtained for the NINSON index, with determination coefficient values of 87%, NSMI index (83.5%) and NINSOL (81.7%). We conclude that both hyperspectral and multispectral remote sensing data of bare soil moisture are valuable, providing good temporal and spatial resolution of soil moisture distribution in local areas, which is important for monitoring and forecasting local changes in climate.