Due to the complexity of interlayer interaction and composition medium, structural performance of the pavement structure is difficult to be accurately calculated. It is particularly important to analyze the mechanical behavior based on the in-situ monitoring data. Industrialized optical fiber sensors (such as fiber Bragg grating (FBG) pressure sensor, temperature sensor and glass fiber reinforced polymer (GFRP) packaged quasi-distributed FBG sensor) and their characterization methods for measuring the multiple parameters have been developed, and embedded in different structural layers of the asphalt pavement in cold regions. According to the periodic in-situ monitoring information, the temperature at different positions in the asphalt pavement layer is non-uniformly distributed. The pressure sensors distributed in the cement stabilized gravel base and the asphalt concrete course can sensitively perceive the vertical deformation of the pavement. Under the temperature action, vertical tensile strains at local points of the asphalt course layer and the base layer indicate that void phenomenon exist inside the surface layer. Affected by low temperature and temperature changes, there is an obvious expansion and contraction cycle inside the pavement. The validity of the monitoring data shows that the FBG sensors embedded in asphalt pavements can accurately detect the structural characteristics, and can be used for long-term continuous monitoring of asphalt pavements in cold regions, which can contribute to the efficient evaluation and maintenance of pavement service performance.
1 February 2026 in Journal of Traffic and Transportation Engineering (English Edition)
Pipes are the main structures serving as the lifeline for oil and gas transportation. However, they are prone to cracks, holes and other damages due to harsh working environments, which can lead to leakage incidents and result in significant economic losses. Therefore, the development of structural health monitoring systems with advanced online diagnostic methods is of great importance for identifying local damages and assessing the safety state of pipe structures. These efforts can guide rapid repairs and ensure the continuous, efficient and cost-effective transportation of oil and gas resources. To address this problem, this paper proposes the development of a pipe monitoring system based on quasi-distributed fiber Bragg grating (FBG) sensing technology. The SSI-COV method is employed to process the sensor responses and extract the modal parameters of the structure. Based on this foundation, an enhanced damage identification index is proposed, which mitigates the effects of support and excitation positions on damage identification. The pipe structure can be regarded as a continuous super-statical beam, and based on its structural symmetry, a unit structure, specifically a stainless-steel pipe with fixed ends, is regarded as the experimental subject. Impact experiments have been conducted to analyze its behavior in both undamaged and damaged states. The research indicates that by using the proposed modal parameter identification method and the damage index, exhibits peak values at damage locations of the pipe structure. This allows for the identification of structural damage with high accuracy, fast processing efficiency and strong robustness. The study provides an effective and reliable damage diagnosis method, which can contribute to the refinement and visualization of pipe structural health monitoring systems.