Sikai Wang

Dr. Sikai Wang

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 October 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
LBLin-Xiang Bian
Lin-Xiang Bian
JMJie Ma
Jie Ma
CZChao Zhang
Chao Zhang
SWSikai Wang
Sikai Wang
富申富康 申
富康 申
Huaping WangHuaping Wang
Huaping Wang
Pipes may have leakage, breakage and local blockage during the long-term service period, which may lead to insufficient flow velocity and low water-supply pressure. Therefore, measuring flow velocity in pipes is crucial for diagnosing damage, ensuring safe operation and managing maintenance. Current flow velocity measurement techniques exhibit poor stability over long-term measurements in complex environments and the measurement quality is affected by the physical and chemical properties of the transported medium. To address these issues, this study employs distributed optical fiber sensors for measuring flow velocity in water-filled pipes and the effectiveness is validated by the fiber Bragg grating (FBG) sensors. Based on the phase change of optical fiber demodulated by distributed acoustic sensing (DAS) device, the flow velocity is accurately measured. Test results demonstrate a quadratic relationship between flow velocity and phase change of optical fiber based on DAS system, with all fitting effects exceeding 0.95, consistent with theoretical analysis. The influence of different sensor layouts of the distributed optical fibers on the monitoring data is also carefully checked, and the testing results show that bonding the optical fiber on the pipes can achieve better measurement quality, compared to the free optical fiber without constraint around the pipe. This study contributes to improving the measurement accuracy and stability of optical fiber sensors by using the DAS system.

29 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
富申富康 申
富康 申
SWSikai Wang
Sikai Wang
JZJia-Yi Zhang
Jia-Yi Zhang
ZXZhigang Xia
Zhigang Xia
BPBao-Rui Peng
Bao-Rui Peng
Huaping WangHuaping Wang
Huaping Wang
The wide-spread application of carbon fiber-reinforced polymer (CFRP) composites in industrial fields has led to high demand for developing a rapid detection method for assessing the structural performance of CFRP composites in operation based on optical fiber sensing technology. Therefore, the effectiveness and reliability of evaluating the fatigue resistance of CFRP plates based on fiber Bragg grating (FBG) monitoring information were explored. The strain response of CFRP plates at key positions under constant amplitude fatigue load was monitored by bare FBGs in series and packaged quasi-distributed FBGs in series. The structural performance and fatigue resistance characteristics of CFRP plates were evaluated by statistical analysis and fatigue life prediction theory. The validity and accuracy of the test and analysis results were demonstrated by finite element modeling analysis. Compared with the traditional methods that evaluate the structural fatigue performance based on mass destructive experiments, this method significantly improves the detection efficiency and realizes the non-destructive and rapid online evaluation of structural service performance. Research shows that the designed FBG sensors can effectively monitor the strain response of CFRP plate under fatigue load, and the correlated fatigue algorithm can provide feasible and reliable technical approaches for online detection and evaluation on the structural performance of CFRP components.

15 December 2025 in IEEE Sensors Journal
Verified
Journal Article
Closed access
Huaping WangHuaping Wang
Huaping Wang
SWSikai Wang
Sikai Wang
GLGuo-Zhi Li
Guo-Zhi Li
XGXiang-Shu Gong
Xiang-Shu Gong
XLXiao-Wei Liu
Xiao-Wei Liu
Ping XiangPing Xiang
Ping Xiang
Due to the complexity of interlayer interaction and composition medium, structural performance of the pavement structure is difficult to be accurately calculated. It is particularly important to analyze the mechanical behavior based on the in-situ monitoring data. Industrialized optical fiber sensors (such as fiber Bragg grating (FBG) pressure sensor, temperature sensor and glass fiber reinforced polymer (GFRP) packaged quasi-distributed FBG sensor) and their characterization methods for measuring the multiple parameters have been developed, and embedded in different structural layers of the asphalt pavement in cold regions. According to the periodic in-situ monitoring information, the temperature at different positions in the asphalt pavement layer is non-uniformly distributed. The pressure sensors distributed in the cement stabilized gravel base and the asphalt concrete course can sensitively perceive the vertical deformation of the pavement. Under the temperature action, vertical tensile strains at local points of the asphalt course layer and the base layer indicate that void phenomenon exist inside the surface layer. Affected by low temperature and temperature changes, there is an obvious expansion and contraction cycle inside the pavement. The validity of the monitoring data shows that the FBG sensors embedded in asphalt pavements can accurately detect the structural characteristics, and can be used for long-term continuous monitoring of asphalt pavements in cold regions, which can contribute to the efficient evaluation and maintenance of pavement service performance.