Sevinj Nuriyeva

Sevinj Nuriyeva

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 October 2024 in Micromachines
Verified
Journal Article
Open access
PDF file
SNSevinj Nuriyeva
Sevinj Nuriyeva
AKAynura Hidayat Karimova
Aynura Hidayat Karimova
HSHabiba Shirinova
Habiba Shirinova
SJSevinj Jafarova
Sevinj Jafarova
GAGhulam Abbas
Ghulam Abbas
Hugo ÁguasHugo Águas
Hugo Águas
The production of cost-effective novel materials for PV solar cells with long-term stability, high energy conversion efficiency, enhanced photon absorption, and easy electron transport has stimulated great interest in the research community over the last decades. In the presented work, Cu/Cu2S-MWCNTs nanocomposites were produced and analyzed in the framework of potential applications for PV solar cells. Firstly, the surface of the produced one-dimensional Cu was covered by Cu2S nanoflake. XRD data prove the formation of both Cu and Cu2S structures. The length and diameter of the one-dimensional Cu wire were 5–15 µm and 80–200 nm, respectively. The thickness of the Cu2S nanoflake layer on the surface of the Cu was up to 100 nm. In addition, the Cu/Cu2S system was enriched with MWCNTs. MWCNs with a diameter of 50 nm interact by forming a conductive network around the Cu/Cu2S system and facilitate quick electron transport. Raman spectra also prove good interfacial coupling between the Cu/Cu2S system and MWCNTs, which is crucial for charge separation and electron transfer in PV solar cells. Furthermore, UV studies show that Cu/Cu2S-MWCNTs nanocomposites have a wide absorption band. Thus, MWCNTs, Cu, and Cu2S exhibit an intense absorption spectrum at 260 nm, 590 nm, and 972 nm, respectively. With a broad absorption band spanning the visible–infrared spectrum, the Cu/Cu2S-MWCNTs combination can significantly boost PV solar cells’ power conversion efficiency. Furthermore, UV research demonstrates that the plasmonic character of the material is altered fundamentally when CuS covers the Cu surface. Additionally, MWCN-Cu/Cu2S nanocomposite exhibits hybrid plasmonic phenomena. The bandgap of Cu/Cu2S NWs was found to be approximately 1.3 eV. Regarding electron transfer and electromagnetic radiation absorption, the collective oscillations in plasmonic metal-p-type semiconductor–conductor MWCNT contacts can thus greatly increase energy conversion efficiency. The Cu/Cu2S-MWCNTs nanocomposite is therefore a promising new material for PV solar cell application.

4 August 2026 in Journal of Materials Science: Materials in Engineering
Verified
Journal Article
Open access
PDF file
SNSevinj Nuriyeva
Sevinj Nuriyeva
MJMaarif Jafarov
Maarif Jafarov
AKAynura Hidayat Karimova
Aynura Hidayat Karimova
LGLala Gahramanli
Lala Gahramanli
MHMetanet Hesenli
Metanet Hesenli
Flora Vidadi HajiyevaFlora Vidadi Hajiyeva
Flora Vidadi Hajiyeva
Zinc oxide nanoparticles (ZnO NPs) were synthesized via a co-precipitation method and doped with Eu 3+ ions using three different approaches: in-situ doping during synthesis (Eu:ZnO(P)), post-synthesis doping (Eu:ZnO(S)), and modification of commercially available ZnO (Eu:ZnO(C)). Structural analysis by X-ray diffraction (XRD) confirmed the preservation of the hexagonal wurtzite phase in all samples, while peak shifts and broadening indicated lattice distortion associated with Eu 3+ incorporation. The crystallite size decreased from 24 to 16 nm for Eu:ZnO(S) and from 61 to 36 nm for Eu:ZnO(C), demonstrating the influence of the doping route on crystal growth. Optical characterization using UV–Vis spectroscopy demonstrated band-gap narrowing from 3.05 to 2.95 eV for Eu:ZnO(C), from 3.00 to 2.90 eV for Eu:ZnO(S), and to 2.85 eV for Eu:ZnO(P). Photoluminescence (PL) analysis revealed enhanced emission intensity and a redshift in doped samples, attributed to defect-related states associated with Eu incorporation. Among all samples, Eu:ZnO(S) exhibited the highest PL intensity and a pronounced emission band near 592 nm, highlighting the effectiveness of post-synthesis doping. These findings demonstrate that the doping strategy and nanoparticle origin play a crucial role in tailoring the structural and optical properties of ZnO nanomaterials for potential optoelectronic and photonic applications.

19 June 2026 in ACS Omega
Verified
Journal Article
Open access
SNSevinj Nuriyeva
Sevinj Nuriyeva
HSHabiba Shirinova
Habiba Shirinova
AKAynura Karimova
Aynura Karimova
LGLala Gahramanli
Lala Gahramanli
FHFlora Hajiyeva
Flora Hajiyeva
Hugo ÁguasHugo Águas
Hugo Águas
This study investigates the impact of melt-cooling rate on the structural, optical, and electrical properties of isotactic polypropylene (iPP) nanocomposites containing wurtzite-type zinc oxide (ZnO) nanocrystals. The nanocomposites were synthesized via a solution-blending and hot-pressing method, followed by cooling under three distinct modes: slow cooling, ice-water quenching, and liquid-nitrogen quenching. X-ray diffraction (XRD) analysis revealed that slow cooling resulted in the formation of both α- and γ-phases in the iPP matrix, whereas rapid cooling produced only the α-phase. Atomic-force-microscopy analysis showed pronounced morphological differences among samples, with slow-cooled films exhibiting rougher surfaces. The findings demonstrate that controlled melt-cooling rate governs supramolecular structural evolution and interfacial ordering in iPP/ZnO nanocomposites. The increased photoluminescence (PL) in slow-cooled samples is linked to the presence of the γ-phase, which promotes interactions between polymer structural defects and deep-level defects in ZnO crystals. Conversely, dielectric results showed that slow cooling lowered interfacial polarization owing to restricted chain mobility, consistent with the Maxwell–Wagner–Sillars (MWS) theory. These results highlight a distinct process-structure–property relationship and indicate that precise regulation of cooling rate can simultaneously adjust optical and dielectric performance. This work highlights the innovative role of processing-induced supramolecular modification and its importance in the design of tunable materials for optoelectronics, flexible-dielectric components, UV-active coatings, sensing, and advanced packaging applications.