This study investigates the synthesis and characterization of acrylic resin/kaolin composites for dielectric applications. Acrylic resin, while widely used for its mechanical strength and ease of processing, exhibits limited dielectric properties, which restrict its use in high-performance electrical insulation. To address this, varying concentrations (0–70%) of raw kaolin, containing 71% kaolinite, were incorporated into an acrylic resin matrix to enhance its dielectric strength and thermal stability. Characterization techniques such as Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and dielectric spectroscopy were used to analyze the molecular structure, morphology, thermal behavior, and dielectric properties of the resulting composites. The study found that with up to 30% kaolin, the composites demonstrated good dielectric performance and thermal resistance, with good particle dispersion and minimal agglomeration. However, beyond 30% filler content, the dielectric and mechanical properties began to decline drastically. The results suggest that these composites could be potentially used for moderate dielectric applications such as insulators and capacitors.
This investigation presents a deep examination on the behavior of radiation effects on pristine (IIR) and halogenated butyl (IIR-Cl, IIR-Br) rubbers. The retrieving these materials is appropriately achieved by the radiolysis fragmentation of main chains that initiates the structural modifications based on the radiation susceptibilities of studied rubbers. The γ-irradiation process causes oxidation under air atmosphere and the effects are revealed by chemiluminescence and FTIR characterizations. The radiolysis on butyl rubbers is conducted onto a specific fragmentation, which allows the two antagonistic processes: oxidation and recombination. During the γ-radiolysis in rubbers is revealed the influence of the electronegativity possesed by the halogen atoms presented in polymer structures, determining the values of activation energy for their oxidative degradation. The γ-processing suggests an ecological procedure for an appropriate preparation of blends or for the recycling as composite products. The calculated activation energies place the polymers in the following stability order of IIR<IIR-Cl<IIR-Br.