In the present research, the removal of zinc from concentrated galvanic wastewater (pH 3.1, conductivity 20.31 mS/cm, salinity, 10.16 g/L, Chemical Oxygen Demand (COD) 2900 mg O₂/L, Total Organic Carbon (TOC) 985 mg/L, zinc (Zn) 1534 mg/L and ethylenediaminetetraacetic acid (EDTA) 70 mg/L) by combination of lime (Ca(OH)₂) and sodium trithiocarbonate (Na₂CS₃) as precipitation agents is studied. Central Composite Design (CCD) and response surface methodology (RSM) were applied for modelling and optimizing the designed wastewater treatment process. Analysis of Variance (ANOVA) and the experimental verification of the model confirmed the consistency of the experimental and estimated data calculated from the model (R² = 0.9173, R²_adj. = 0.8622). The use of Ca(OH)₂ and Na₂CS₃ in the optimal condition calculated from the model (pH = 10.75 ± 0.10, V Na₂CS₃ dose 0.043 mL/L and time = 5 min) resulted in a decrease in the concentration of Zn in treated wastewater by 99.99%. Other physicochemical parameters of wastewater also improved. Simultaneously, the application of Ca(OH)₂ and Na₂CS₃ reduced the inhibition of activated sludge dehydrogenase from total inhibition (for raw wastewater) to −70% (for treated wastewater). Under the same conditions the phytotoxicity tests revealed that the seed germination index for the raw and treated wastewater increased from 10% to 50% and from 90% to 100% for white mustard (Sinapis alba) and garden cress (Lepidium sativum L.), respectively. The parameters of root and shoot growth showed a statistically significant improvement. Treated wastewater (1:10) showed a stimulating effect (shoot growth) compared to the control sample (GI = −116.7 and −57.9 for S. alba and L. sativum L., respectively). Thus, the use of Na₂CS₃ is a viable option for the treatment of concentrated galvanic wastewater containing zinc.

CO₂ Capture Ready Process, as a part of Carbon Capture and Storage (CCS) technology, is a response to international political pressure and the priority of the European Commission to reduce anthropogenic CO₂ emissions since it is connected with concerns regarding global warming. This is currently considered as an option for lessing CO₂ emissions into the atmosphere. Many laboratory experiments, as well as pilot projects, have been carried out using different capture systems, but until now no experience from the one-to-one size operational installation has been gained. The energy industry must meet several challenges associated with the start-up of the new full-scale project. This paper investigates the problems that can occur while linking a new technology like the CO₂ Capture Ready Process to a working fossil fuel power plant. A Hazard and Operability study (HAZOP) has been used, as it is a structured and systematic examination of a planned or existing process or operation, in order to identify and evaluate problems that may represent risks to personnel or equipment. A case study of a post-combustion CO₂ capture system with an aqueous monoethanolamine as a solvent is presented, as it is the most likely system to be used in Polish power plants. Basic problems in the analysis as well as the parameters that should be considered to determine vulnerabilities of the process were successfully identified. Gaining experience about the installation’s behaviour while connected to the existing equipment of any power plant is critical for future CCS projects.

The main purpose of this paper was to outline a novel approach for the use of industrial by-products generated in coal mines and coal-fired power plants as the components for artificial soils. Several coal combustion by-products, coal mine waste and organic waste materials were tested at laboratory scale for use in the reclamation of areas degraded by coal mining activity. The role of artificial soils was the land rehabilitation of the high acidic waste heap. The results revealed that the amounts of organic matter (14.87–25.01%) and nutrients in the soil substitutes were sufficient to support plant growth, i.e., N (0.37–0.51%), P (0.23–0.47%), K (1.78–3.17%), Ca (4.93–8.39%) and Mg (1.16–1.71%). A phytotoxicity test using white mustard (Sinapis alba) seeds under laboratory conditions showed good germination results (56–66%) for three soil substitutes that did not contain fly ash from biomass combustion, compared to the reference soil (84%). The relationships established for the aqueous leachate parameters of soil substitutes vs. the Sinapis alba germination revealed negative correlations with electrical conductivity (r = −0.88), SO₄²⁻ (r = −0.91) and Cl⁻ (r = −0.70) ions; the two latter ones were responsible for the salinity which hampered the germination process of the soil substitutes. Moreover, quite similar correlations were obtained between the germination of Sinapis alba and the trace elements of the soil substitutes: Fe (r = −0.69), Cd (r = −0.72), Cu (r = −0.80), Pb (r = −0.78) and Zn (r = −0.74). However, negative and significant correlations in aqueous leachates were shown only with Ni concentration (r = −0.73). The relevance of these results for the effect of salinity on germination and the early growth of S. alba was discussed in detail and was confirmed with the Principal Component Analysis (PCA). The study proved that the physicochemical characteristic of recycled wastes exhibited their potential usefulness for the reclamation of affected areas such as mine waste heaps.