Yurii V. Fadeev

Dr. Yurii V. Fadeev


Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
AVAnton S. Voronin
Anton S. Voronin
YFYurii V. Fadeev
Yurii V. Fadeev
MMMstislav Makeev
Mstislav Makeev
PMPavel Andreevich MIkhalev
Pavel Andreevich MIkhalev
AOAlexey Osipkov
Alexey Osipkov
SKStanislav VIKTOROVICH Khartov
Stanislav VIKTOROVICH Khartov
Embedded copper mesh coatings with low sheet resistance and high transparency were formed using a low-cost Cu seed mesh obtained with a magnetron sputtering on a cracked template, and subsequent operations electroplating and embedding in a photocurable resin layer. The influence of the mesh size on the optoelectric characteristics and the electromagnetic shielding efficiency in a wide frequency range is considered. In optimizing the coating properties, a shielding efficiency of 49.38 dB at a frequency of 1 GHz, with integral optical transparency in the visible range of 84.3%, was obtained. Embedded Cu meshes have been shown to be highly bending stable and have excellent adhesion strength. The combination of properties and economic costs for the formation of coatings indicates their high prospects for practical use in shielding transparent objects, such as windows and computer monitors.

4 February 2023 in Materials
Verified
Journal Article
Open access
PDF file
MSMikhail Maksimovich Simunin
Mikhail Maksimovich Simunin
AVAnton S. Voronin
Anton S. Voronin
YFYurii V. Fadeev
Yurii V. Fadeev
SDSergey Sergeevish Dobrosmyslov
Sergey Sergeevish Dobrosmyslov
AKA. A. Kuular
A. A. Kuular
SKS. V. Khartov
S. V. Khartov
The paper describes the effect of the addition of alumina nanofibers on the mechanical properties of the epoxy resin. Alumina nanofibers functionalized with epoxypropyl functional groups are used in this work. The dependence of the mechanical characteristics on the amount of the additive, as well as the features of its distribution in the material, is investigated. In the work, nanocomposites were obtained, which are epoxy resin with aluminum oxide nanofibers. The mechanical properties of the samples were studied by bending tests and differential mechanical analysis (DMA). It has been shown that the addition of alumina nanofibers leads to an increase in ultimate flexural strength. The maximum of this increase is near the percolation threshold of alumina nanofibers in epoxy resin. With the addition of 0.2% alumina nanofibers, the ultimate flexural strength increases from 41 to 71 MPa. It is shown that after exceeding the percolation threshold of nanofibers, the ultimate strength decreases. In this case, the elastic modulus increases from 0.643 to 0.862 GPa. DMA is shown that the glass transition temperature decreases with increasing amount of the additive. This indicates a decrease in the molecular weight of the polymer. By implication, this suggests that the hardener connects the epoxypropyl functional groups on the nanofibers and the epoxy groups in the resin, and as a result of this process, the nanofibers become natural polymer chain length limiters. The data obtained from mechanical testing and differential mechanical analysis can be used to strengthen epoxy resins in polymer composite materials and molding compositions.

14 December 2021 in Polymers
Verified
Journal Article
Open access
PDF file
MSMikhail Maksimovich Simunin
Mikhail Maksimovich Simunin
AVAnton S. Voronin
Anton S. Voronin
YFYurii V. Fadeev
Yurii V. Fadeev
Yuri MikhlinYuri Mikhlin
Yuri Mikhlin
DLDenis A. Lizunov
Denis A. Lizunov
SKStas V. Khartov
Stas V. Khartov
Small additions of nanofiber materials make it possible to change the properties of polymers. However, the uniformity of the additive distribution and the strength of its bond with the polymer matrix are determined by the surface of the nanofibers. Silanes, in particular, allow you to customize the surface for better interaction with the matrix. The aim of our work is to study an approach to silanization of nanofibers of aluminum oxide to obtain a perfect interface between the additive and the matrix. The presence of target silanes on the surface of nanofibers was shown by XPS methods. The presence of functional groups on the surface of nanofibers was also shown by the methods of simultaneous thermal analysis, and the stoichiometry of functional groups with respect to the initial hydroxyl groups was studied. The number of functional groups precipitated from silanes is close to the number of the initial hydroxyl groups, which indicates a high uniformity of the coating in the proposed method of silanization. The presented technology for silanizing alumina nanofibers is an important approach to the subsequent use of this additive in various polymer matrices.

14 November 2024 in Polymers
Verified
Journal Article
Open access
PDF file
IBIl'ya Bril’
Il'ya Bril’
AVAnton S. Voronin
Anton S. Voronin
YFYurii V. Fadeev
Yurii V. Fadeev
APAleksandr Pavlikov
Aleksandr Pavlikov
IGILya Govorun
ILya Govorun
SKStanislav VIKTOROVICH Khartov
Stanislav VIKTOROVICH Khartov
Nowadays, the Internet of Things (IOT), electronics, and neural interfaces are becoming an integral part of our life. These technologies place unprecedentedly high demands on materials in terms of their mechanical and electrical properties. There are several strategies for forming conductive layers in such composites, e.g., volume blending to achieve a percolation threshold, inkjet printing, lithography, and laser processing. The latter is a low-cost, environmentally friendly, scalable way to produce composites. In our work, we synthesized AgNW and characterized them using Ultraviolet-visible spectroscopy (UV-vis), Transmission electron microscopy (TEM), and Selective area electron diffraction (SAED). We found that our AgNW absorbed in the UV-vis range of 345 to 410 nm. This is due to the plasmon resonance phenomenon of AgNW. Then, we applied the dispersion of AgNW on the surface of the polymer substrate, dried them and we got the films of AgNW.. We irradiated these films with a 432 nm laser. As a result of the treatment, we observed two processes. The first one was the sintering and partial melting of nanowires under the influence of laser radiation, as a consequence of which, the sheet resistance dropped more than twice. The second was the melting of the polymer at the interface and the subsequent integration of AgNW into the substrate. This allowed us to improve the adhesion from 0–1 B to 5 B, and to obtain a composite capable of bending, with radius of 0.5 mm. We also evaluated the shielding efficiency of the obtained composites. The shielding efficiency for 500–600 nm thick porous film samples were 40 dB, and for 3.1–4.1 µm porous films the shielding efficiency was about 85–90 dB in a frequency range of 0.01–40 GHz. The data obtained by us are the basis for producing flexible electronic components based on AgNW/PET composite for various applications using laser processing methods.

14 July 2022 in Buildings
Verified
Journal Article
Open access
PDF file
SDSergey Sergeevish Dobrosmyslov
Sergey Sergeevish Dobrosmyslov
VZVladimir Efimovich Zadov
Vladimir Efimovich Zadov
RNRashit Anvarovich Nazirov
Rashit Anvarovich Nazirov
GNGennady Efimovich Nagibin
Gennady Efimovich Nagibin
AVAnton S. Voronin
Anton S. Voronin
SKStanislav VIKTOROVICH Khartov
Stanislav VIKTOROVICH Khartov
In this work, a method for obtaining a high-strength composite material on a sulfur binder without the use of chemical modifiers was proposed. It consists in obtaining a thixotropic casting mixture in the vicinity of the yield point of the system during vibration laying. The compressive strength of the obtained composite was about 97.5–94.0 MPa. Physical and mechanical characteristics remained stable for 7 years. The samples were obtained for a model composition of sulfur/marshalite (finely ground 98% silicon dioxide). The microstructure of the synthesized material was studied by electron microscopy, the results of which showed that shrinkage cavities are characteristic of a material with a low density, and no shrinkage cavities were found for a high-strength material. The phase composition was determined by the methods of XRD analysis, according to the results of which it can be argued that sulfur is in the orthorhombic form (S8). This technique can be proposed for obtaining the high-strength stable building material.

24 January 2025 in Polymers
Verified
Journal Article
Open access
PDF file
AVAnton S. Voronin
Anton S. Voronin
IBIl'ya Bril’
Il'ya Bril’
APAleksandr Pavlikov
Aleksandr Pavlikov
MMMstislav Makeev
Mstislav Makeev
PMPavel Andreevich MIkhalev
Pavel Andreevich MIkhalev
SKStanislav VIKTOROVICH Khartov
Stanislav VIKTOROVICH Khartov
The modern pace of scientific and technological development dictates unprecedented requirements for the speed of information transfer. The THz range is considered one of the most promising and has been actively developing in recent years. Along with the need to develop transmitting devices, the demand for shielding materials in this range, including transparent ones, is also growing. In this work, we present two types of composite films based on silver nanowires and PEDOT:PSS. We characterized these composite films in terms of optoelectrical parameters, as well as shielding characteristics in the THz range. We found that our composite films have a sheet resistance (R□) of about 8.6 ± 1.2 Ω/□ with a transparency of about 83.41% and shielding efficiency is 25.85 dB in the THz region, which makes them excellent candidates for transparent shielding materials. We also made a bilayer sandwich structure from these composite films, which showed a shielding efficiency of about 49.34 dB in the range of 0.2–0.8 THz with a transparency of 66.33%. In addition, we assessed the possibility of real application of the structures in terms of stability to external conditions. Our composite films sustain atmospheric corrosion and maintain stable sheet resistance for 30 days.