In recent years, poly(vinylidene fluoride) (PVDF) has emerged as a versatile polymer with a wide range of applications across various fields.

Embedded copper mesh coatings with low sheet resistance and high transparency were formed using a low-cost Cu seed mesh obtained with a magnetron sputtering on a cracked template, and subsequent operations electroplating and embedding in a photocurable resin layer. The influence of the mesh size on the optoelectric characteristics and the electromagnetic shielding efficiency in a wide frequency range is considered. In optimizing the coating properties, a shielding efficiency of 49.38 dB at a frequency of 1 GHz, with integral optical transparency in the visible range of 84.3%, was obtained. Embedded Cu meshes have been shown to be highly bending stable and have excellent adhesion strength. The combination of properties and economic costs for the formation of coatings indicates their high prospects for practical use in shielding transparent objects, such as windows and computer monitors.

Inkjet printing is a universal method of direct application and application of various substances to the surface of materials. This technology is gaining popularity in various fields, from textile printing to microelectronics and biomedicine. In the textile industry, inkjet printing has been widely used for many years. In our approach, we systematized the main approaches to maintaining the quality of inkjet printing on various components of materials. We reported and analyzed methods for optimizing the rheological properties of paint to improve the colorimetric characteristics and color fastness on various fabrics. The paper presents surface tension and viscosity regulators, with the help of which the colorimetric indicators of the image on textiles can be improved. For each type of textile, individual modifiers were demonstrated that could most effectively improve the quality of the pattern. Particular attention was paid to the methods of modifying the surface of products, including both physical and chemical approaches. This section discusses an effective method of plasma treatment, which allows you to control the surface free energy for textile polymer materials. By controlling the surface tension of inkjet paints and the surface energy of the material, it is possible to achieve maximum adhesion, thereby significantly increasing the amount of paint per unit area of textile. Additionally, for similar purposes, the principles of chemical modification of the surface with various substances were considered. These methods enable control over the wettability of ink and adhesion to textiles of consistent composition. Additionally, we highlight the potential of thin, optically transparent polymer coatings as a promising strategy to enhance the efficiency of dyeing textile materials. The textile industry is rapidly developing, and the functionality of clothing is improving every year. Inkjet printing methods optimized for maximum accuracy and quality can serve as a significant alternative for applying images.

The study was devoted to the creation of transparent electrodes based on highly conductive mesh structures. The analysis and reasonable choice of technological approaches to the production of such materials with a high Q factor (the ratio of transparency and electrical conductivity) were carried out. The developed manufacturing technology consists of the formation of grooves in a transparent substrate by photolithography methods, followed by reactive ion plasma etching and their metallization by chemical deposition using the silver mirror reaction. Experimental samples of a transparent electrode fabricated using this technology have a sheet resistance of about 0.1 Ω/sq with a light transmittance in the visible wavelength range of more than 60%.

Composite nanomaterials have been prepared through thermal decomposition of palladium diacetate. The composite contains palladium nanoparticles embedded in high-pressure polyethylene. The materials were studied by a number of different physico-chemical methods, such as transmission electron microscopy, X-ray diffraction, X-ray absorption spectroscopy, electron paramagnetic resonance, and EXAFS. The average size of the nanoparticles is 7.0 ± 0.5 nm. It is shown that with the decrease of metal content in the polymer matrix the average size of nanoparticles decreased from 7 to 6 nm, and the coordination number of palladium also decreased from 7 to 5.7. The mean size of palladium particles increases with the growing concentration of palladium content in the matrix. It is shown that the electrophysical properties of the material obtained depend on the filler concentration. The chemical composition of palladium components includes metallic palladium, palladium (III) oxide, and palladium dioxide. All samples have narrow lines (3–5 Oe) with a g factor of around two in the electron paramagnetic resonance (EPR) spectra. It is shown that EPR lines have uneven boarding by saturation lines investigation. The relaxation component properties are different for spectral components. It leads to the spectrum line width depending on the magnetic field value. At first approximation, the EPR spectra can be described as a sum of two Lorentzian function graphs, corresponding to the following two paramagnetic centers: one is on the surface, and one is inside the palladium particles. Some of the experimental characteristics were measured for the first time. The data obtained indicate interesting properties of palladium-based nanocomposites, which will be useful for obtaining products based on these materials.

This paper is devoted to the study of the structure and thermomechanical properties of PVDF-based ferroelectric polymer film. Transparent electrically conductive ITO coatings are applied to both sides of such a film. In this case, such material acquires additional functional properties due to piezoelectric and pyroelectric effects, forming, in fact, a full-fledged flexible transparent device, which, for example, will emit a sound when an acoustic signal is applied, and under various external influences can generate an electrical signal. The use of such structures is associated with the influence of various external influences on them: thermomechanical loads associated with mechanical deformations and temperature effects during operation, or when applying conductive layers to the film. The article presents structure investigation and its change during high-temperature annealing using IR spectroscopy and comparative results of testing a PVDF film before and after deposition of ITO layers for uniaxial stretching, its dynamic mechanical analysis, DSC, as well as measurements of the transparency and piezoelectric properties of such structure. It is shown that the temperature-time mode of deposition of ITO layers has little effect on the thermal and mechanical properties of PVDF films, taking into account their work in the elastic region, slightly reducing the piezoelectric properties. At the same time, the possibility of chemical interactions at the polymer–ITO interface is shown.