The global problem of microplastics in the environment is “inspiring” scientists to find environmentally friendly and economically viable methods to remove these pollutants from the environment. Advanced oxidation processes are among the most promising methods. In this work, the potential of Fenton, photo-Fenton, and Fenton-like processes for the degradation of microplastics from low-density polyethylene (LDPE), polypropylene (PP), and poly(vinyl chloride) (PVC) in water suspensions was investigated. The influence of three parameters on the efficiency of the degradation process was tested: the pH of the medium (3–7), the mass of added iron (10–50 times less than the mass of microplastics), and the mass of added H₂O₂ (5–25 times more than the mass of added iron). The effectiveness of the treatment was monitored by FTIR-ATR spectroscopy. After 60-min treatments, the PP microparticles were found to be insensitive. In the Fenton treatment of PVC and the photo-Fenton treatment of LDPE and PVC, changes in the FTIR spectra related to the degradation of the microplastics were observed. In these three cases, the treatment parameters were optimized. It was found that a low pH (3) and a high iron mass (optimal values were 1/12 and 1/10 of the mass of the microplastics for LDPE and PVC, respectively) favored all three. The degradation of LDPE by the photo-Fenton treatment was favored by high H₂O₂ concentrations (25 times higher than the mass of iron), while these concentrations were significantly lower for PVC (11 and 15 times for the Fenton and photo-Fenton treatment, respectively), suggesting that scavenging activity occurs.

Microplastics are an emerging class of recalcitrant organic pollutants that are of general scientific and public interest nowadays. It would be ideal to remove microplastics from the environment through biodegradation, as biodegradation is a highly ecological and economically acceptable approach. Unfortunately, the efficiency of biodegradation of conventional plastic polymers is low. The application of a suitable pretreatment could increase the efficiency of biodegradation. In this study, the applicability of UV-C/H₂O₂ and UV-C/S₂O₈²⁻ advanced oxidation processes as pretreatments for the biodegradation of polystyrene and poly(vinyl chloride) microplastics by the yeast Candida parapsilosis was investigated. For the investigated range (pH 4–10, peroxide concentration up to 20 mM and treatment duration up to 90 min), the UV-C/H₂O₂ process proved to be more effective in degrading polystyrene microplastics, while the UV-C/S₂O₈²⁻ process was more efficient at degrading poly(vinyl chloride) microplastics. Samples pretreated under optimal conditions (90 min treatment time at a pH of 5.7 and H₂O₂ concentration of 20.0 mM for polystyrene samples; 90 min treatment time at a pH of 8.6 and S₂O₈²⁻ concentration of 11.1 mM for poly(vinyl chloride) samples) were subjected to biodegradation by Candida parapsilosis. The biodegradation conditions included an agitation speed of 156 rpm and an initial pH of 5.7 for the experiments with the polystyrene samples, while an agitation speed of 136 rpm and an initial pH of 4.9 were used for the poly(vinyl chloride) experiments. The initial value of the optical density of the yeast suspension was 1.0 in both cases. The experiments showed a positive effect of the pretreatment on the number of yeast cells on the surface of the microplastics.

The environmental impact of plastic waste is a growing global challenge, primarily due to non-biodegradable plastics from fossil resources that accumulate in ecosystems. Biodegradable polymers like polyhydroxyalkanoates (PHAs) offer a sustainable alternative. PHAs are microbial biopolymers produced by microorganisms using renewable substrates, including agro-industrial byproducts, making them eco-friendly and cost-effective. This study focused on the isolation and characterization of PHA-producing microorganisms from agro-industrial waste, including chickpeas, chickpeas with bean residues, and starch. Screening via Sudan Black staining identified PHA-accumulating strains such as Brevibacillus sp., Micrococcus spp., and Candida krusei, among others. To assess the potential for PHA biosynthesis, solid-state fermentation (SSF) was conducted using agro-industrial waste as substrates, along with a mixed culture of the isolated microorganisms. The highest observed yield was a PHA accumulation of 13.81%, achieved with chickpeas containing bean residues. Structural and thermal characterization of the PHAs was performed using Fourier-transform infrared spectroscopy with attenuated total reflectance (FTIR-ATR), differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). FTIR-ATR spectra indicated polyhydroxybutyrate (PHB), suggesting it as the synthesized PHA type. This study highlights the potential of agro-industrial waste for sustainable PHA production and eco-friendly bioplastics.

Microalage are broadly recognized as promising agents for sustainable wastewater treatment and biomass generation. However, industrial effluents such as petroleum refinery wastewater (WW) present challenges due to toxic growth inhibiting substances. Three marine microalgae species: Pseudochloris wilhelmii, Nannochloropsis gaditana and Synechococcus sp. MK568070 were examined for cultivation potential in oil refinery WW. Their performance was evaluated in terms of growth dynamics, lipid productivity, and toxicity reduction, with a focus on their suitability for largescale industrial use. N. gaditana demonstrated the highest growth rate and lipid content (37% d.w.) as well as lipid productivity (29.45 mg/(Lday)) with the N-uptake rate of 0.698 mmol/(gday). The highest specific DIN uptake rate was observed inn P. wilhelmii (0.895 mmol/(gday) along with the highest volumetric productivity (93.9 mg/L/day) and WW toxicity removal (76.5%), while Synechococcus sp. MK568070 demonstrated lower performance metrics. A simple numerical model was applied to calculate continuous operation based on empirical results of batch experiments. Sustainability of the microalgae-based WW remediation under the conditions of optimized lipid biomass production was estimated, regarding 2019–2022–2025 cost dynamics. Parameters for optimum open raceway pond cultivation were calculated, and the biomass production accumulation was estimated, with the highest biomass production noted in P. wilhelmii (171.38 t/year). Comparison of treatment costs, production costs and revenue showed that the best candidate for WW remediation is N. gaditana.

The extensive use of antiviral substances (SASs) during and after the COVID-19 pandemic has increased their release into wastewater systems, raising concerns regarding their persistence and potential ecotoxicological effects. The primary objective of this study was to isolate bacterial strains from activated sludge (AS) that possess the ability to biodegrade SASs. From the AS sample, three bacterial species, Comamonas testosteroni (I2), Bacillus amyloliquefaciens (I3) and Bacillus mycoides (I4), were successfully isolated and identified. These strains were subsequently applied in biodegradation experiments targeting seven SASs: daclatasvir (DCV), darunavir (DRV), favipiravir (FAV), lopinavir (LOP), remdesivir (REM), ritonavir (RIT), and umifenovir (UMI). During the experiments, residual SAS concentrations, microbial growth parameters, physicochemical indicators and ecotoxicity were monitored. All three strains demonstrated substantial biodegradation potential, achieving reductions exceeding 90% for most tested compounds, with particularly low toxicity observed in experiments conducted with AS and Bacillus amyloliquefaciens. These findings highlight the relevance of AS-derived bacteria as promising candidates for enhancing SAS removal in wastewater treatment processes.