As a branch of nondestructive testing (NDT), Pulsed Eddy Current Testing (PECT) is characterized by its wide frequency spectrum and high penetration depth. After years of development, it has been widely applied to defect detection and material characterization of key components in industries such as petrochemicals, new energy, and aerospace. With the large-scale application of new energy sources like liquefied natural gas (LNG), methanol, and liquid hydrogen, the demand for NDT of non-ferromagnetic materials (e.g., austenitic stainless steel) has surged. However, challenges such as electromagnetic leakage caused by low magnetic permeability and the lift-off effect induced by protective layers impose stricter requirements on inspection technologies, driving the evolution of PECT towards adaptability in complex scenarios. This paper systematically reviews the latest advances in PECT technology, covering detection sensors, modeling methods, detection signal processing, and engineering applications. With a particular emphasis on research outcomes from the past decade, this paper also proposes potential directions for future development, aiming to provide a reference for innovative research and the industrial promotion of PECT technology.
In this study, a combined approach of molecular dynamics (MD) simulations and experimental bottle tests was employed to systematically investigate the demulsification performance and underlying mechanisms of two distinct demulsifiers—Demulsifier X (SP/BP series and alcohol-initiated polyethers) and Demulsifier Y (AP/AE series and amine-initiated polyethers)—targeting polymer-containing oil-in-water (O/W) emulsions derived from heavy oil polymer flooding. Molecular models for heavy oil, saline water, partially hydrolyzed polyacrylamide (HPAM), and demulsifiers were constructed using BIOVIA Materials Studio software. Their dynamic behaviors at the oil–water interface were simulated within three distinct saline systems containing NaCl, CaCl2, and MgCl2, respectively. Simulation results indicated that the demulsifiers effectively displaced interfacial HPAM molecules, increased interfacial tension, and reduced interfacial interaction energy. Experimental bottle tests, evaluating the effects of settling time, temperature, and concentration on dehydration rates and oil content, confirmed that Demulsifier Y outperformed Demulsifier X. Specifically, Demulsifier Y achieved superior dehydration rates with lower dosages, shorter settling times, and reduced temperature requirements under optimal conditions. This work provides both microscopic mechanistic insights and macroscopic experimental validation for the screening and application of high-efficiency demulsifiers.
Mechanically lined pipes (MLP) combine a carbon-steel base pipe with a thin corrosion-resistant liner that transfers load through frictional contact. This numerical study compares the stress responses of matched monometallic and mechanically lined pipes under prescribed internal pressure, temperature, and bending. Three-dimensional finite element models are used to represent the material layers, contact, friction, and thermal loading. Circumferential mesh refinement and comparison with field inspection data provide checks on the reported stress response. In the non-bending one-factor cases, pressure and diameter primarily affect equivalent stress, whereas increasing temperature increases liner compression and base-pipe equivalent stress. At constant total wall thickness, increasing liner thickness reduces liner compression but increases stress in the thinner base pipe. Bending increases both response measures. Local sensitivity and two-factor analyses characterize stress variations within the sampled conditions. Exploratory regression equations show high internal cross-validation accuracy, and on 22 finite-element cases, the unchanged regression equations achieved R2 values of 0.965 for liner stress and 0.986 for base-pipe stress. These results support stress-trend estimation within the tested conditions but do not establish accuracy for arbitrary five-factor combinations or a universal failure threshold.