Elif Turkes Basaran

Dr. Elif Turkes Basaran

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2019 in Nigerian Journal of Clinical Practice
Verified
Journal Article
Open access
EBElif Turkes Basaran
Elif Turkes Basaran
YGY Gokce
Y Gokce
Kness groups [2 mm (A), 1.5 mm (B), and 1 mm (C)] and, each group was further divided into seven restoration subgroups (n = 10): direct composite (control) (K), composite with fiber on cavity floor (KT), composite with fiber on occlusal level (KO), fiber post and composite (FP), inlay (L), fiber on cavity floor and inlay (LT), and inlay and fiber on occlusal level (LO). Fracture test was performed, and data were compared with Kruskal–Wallis and Mann–Whitney U tests (P < 0.05). Results: There were no differences between the subgroups in A and C statistically (P > 0.05). However, in B, KO subgroup showed statistically higher values (P = 0.039). Conclusion: Wall support of 2 mm was adequate, and support of 1 mm was completely insufficient. When the wall thickness was 1.5 mm, direct restoration with fiber at the occlusal level significantly improved resistance....

19 February 2020 in Odontology
Verified
Journal Article
Closed access
PDF file
MKMAGRUR KAZAK
MAGRUR KAZAK
MTMurat Tiryaki
Murat Tiryaki
EBElif Turkes Basaran
Elif Turkes Basaran
YGYasemin Benderli Gokce
Yasemin Benderli Gokce

19 January 2025 in Dentistry Journal
Verified
Journal Article
Open access
PDF file
BDBurcu Dikici
Burcu Dikici
EBElif Turkes Basaran
Elif Turkes Basaran
ECEsra Can Can
Esra Can Can
Background/Objectives: This study aimed to investigate the microtensile bond strength (µTBS) of composite-based (Cerasmart), polymer-infiltrated (Vita Enamic), and feldspathic (Cerec) CAD/CAM blocks luted to dentin using a dual-cure resin cement (LinkForce), as well as micro-hybrid (G-aenial) and flowable composites (G-aenial Universal Flo), and evaluate the microhardness (HV) of luting materials through the CAD/CAM blocks. Methods: Cerasmart, Enamic, and Cerec were luted to dentin using three luting materials; LinkForce, G-aenial, and Universal Flo (n = 5). For HV, 117 disk-shaped specimens from LinkForce, G-aenial, and Universal Flo (n = 13) were polymerized through 3 mm thick CAD/CAM. Thirty-nine light-cured specimens without CAD/CAM were used as control. Following 24 h storage, the µTBS and HV were evaluated. Data were analyzed using the two-way ANOVA and post hoc Tukey tests (p < 0.05). Results: The µTBS to dentin and HV were significantly influenced by the type of luting material and CAD/CAM material. With all the CAD/CAM materials, LinkForce and Universal Flo exhibited a significantly similar µTBS to that of dentin (p > 0.05). Compared with the control group, all the HV values of the luting materials decreased significantly (p < 0.05). Conclusions: Heavily filled flowable composites exhibit a bonding effectiveness similar to that of dual-cure resin cements. All the luting materials showed similar HV when polymerized through the polymer-infiltrated CAD/CAM material.

7 April 2025 in Coatings
Verified
Journal Article
Open access
PDF file
BDBurcu Dikici
Burcu Dikici
EBElif Turkes Basaran
Elif Turkes Basaran
NŞNazlı Şirinsükan
Nazlı Şirinsükan
ECEsra Can Can
Esra Can Can
This study assessed the repair shear bond strength (SBS; MPa) and surface roughness (Ra; μm) of aged hybrid ceramic (Cerasmart270, GC) and nano-hybrid ceramic (Grandio Blocs, Voco) CAD/CAM blocks after different surface pretreatment methods. In this study, 2 mm thick Cerasmart270 and Grandio Blocs were cut into slabs (Isomet; n = 80 per group). Following aging for six months, the specimens in each CAD/CAM material were randomly divided into four groups (n: 20 each) according to the surface pretreatments: control (no pretreatment), Er:YAG laser, sandblasting, and bur grinding. A total of 10 specimens in each CAD/CAM material pretreatment group were used for Ra evaluation (Perthometer Mahr), while the other 10 were for SBS. After the application of a silane primer (G-Multi Primer, GC) and universal adhesive (G2-Bond, GC), composite build-ups (Filtek Z250; 3MESPE) were performed for the SBS evaluation. After storage in distilled water for 24 h, SBS was evaluated with a universal testing machine (Instron). SBS and Ra data were analyzed with two-way ANOVA and Tukey’s post hoc tests (p < 0.05). SBS was significantly affected by the surface pretreatment methods (p = 0.0001) and by the types of CAD/CAM material (p = 0.005). Bur grinding showed the highest SBS for both CAD/CAM materials, while the control groups yielded significantly lower SBS than bur grinding and sandblasting (p < 0.05). Er:YAG lasers did not significantly enhance the SBS compared to the control group. Sandblasting presented significantly higher SBS than lasers only in Grandio Blocs (p < 0.05). The surface pretreatment methods significantly influenced Ra (p = 0.0001); however, no significant interaction was found between the types of CAD/CAM material and the surface pretreatments (p > 0.05). Control groups exhibited, significantly, the lowest Ra for both materials (p = 0.0001), while no significant differences were observed between the other pretreatment methods. Bur grinding was identified as the most effective pretreatment method for repairing hybrid ceramic CAD/CAM materials.

27 October 2017 in Biotechnology & Biotechnological Equipment
Verified
Journal Article
Open access
NTNeslihan Tinastepe
Neslihan Tinastepe
EBElif Turkes Basaran
Elif Turkes Basaran
Ender KazazogluEnder Kazazoglu
Ender Kazazoglu
Limited data are available on the repair bond strength between computer-aided design and manufacturing (CAD/CAM) resin nanoceramics and composite repair materials. Therefore, the purpose of this study was to test the influence of several different surface treatment modalities, intermediate agents and phosphoric acid on the shear bond strength (SBS) of repair composites with water-aged CAD/CAM resin nanoceramics. Three pretreatment and four conditioning methods comprised 12 different groups. A universal testing machine was used to test the SBS. Specimens were examined with a stereomicroscope and scanning electron microscope to determine the fracture mode. The results showed that a combination of the pretreatment and conditioning methods significantly enhanced the SBS of the resin nanoceramic (p:0.001; p < 0.01), while etching with phosphoric acid did not affect the SBS (p:0.841; p > 0.05). This study showed that surface pretreatment in combination with a conditioning method should be used in the repair of CAD/CAM nanoceramics. The highest SBS values were achieved by grinding the surface with a diamond bur followed by silane and adhesive application, whereas the lowest values were obtained in the non-conditioned non-pretreated group.

30 January 2024 in Odontology
Verified
Journal Article
Closed access
PDF file
BDBurcu Dikici
Burcu Dikici
ECEsra Can
Esra Can
EBElif Turkes Basaran
Elif Turkes Basaran
GBGüher Barut
Güher Barut
NDNazmiye Dönmez
Nazmiye Dönmez