Yongjia Li

Dr. Yongjia Li

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 April 2019 in IEEE Journal of Solid-State Circuits
Verified
Journal Article
Closed access
YLYongjia Li
Yongjia Li
MMMario Motz
Mario Motz
LRLeneesh Raghavan
Leneesh Raghavan
This paper presents a fast spinning-current Hall sensor with 568 ns overall delay for sub-microsecond overcurrent detection (OCD) in a magnetic current sensor. By combining the continuous-time chopping techniques and discrete-time dynamic offset cancellation techniques, the spinning frequency of 250 kHz does not limit the sensor speed. The proposed track-and-hold (T&H) ping-pong comparators extend the usage of auto-zeroing techniques for sensor interface applications. The design achieves a magnetic residual offset of 85 μT (mean) and 79 μT (1σ ), while the offset drifts only 0.68 μT/°C (mean) and 0.27 μT/°C (1σ ) from -40 °C to 150 °C. In addition, a background switched-capacitor filter breaks the limitation of high-frequency errors on conventional correlated double sampling techniques. The design thus reduces the input-referred noise to 136 μTrms with a bandwidth of 1.7 MHz, while consuming at least 30% less power than the other state-of-the-art designs. Moreover, the analog stress compensation with temperature coefficient (TC) correction guarantees an overall threshold error within ± 4% over package stress and temperature.

28 February 2024 in IEEE Sensors Journal
Verified
Journal Article
Closed access
LZLong Zhang
Long Zhang
GZGuiqiang Zheng
Guiqiang Zheng
YLYichen Li
Yichen Li
XLXueqi Li
Xueqi Li
XSXiaofeng Sun
Xiaofeng Sun
WSWeifeng Sun
Weifeng Sun
This paper presents a three-dimension (3D) Hall device fabricated on 0.15μm Bipolar-CMOS-DMOS (BCD) platform without additional masks or processes. The 3D Hall device is designed to detect the 3-axis magnetic field in space with lateral and vertical Hall device components. The lateral Hall device features a shallow-trench-isolation (STI) structure and a thin magnetic-sensitive well. The lateral Hall device has an input resistance of 25.1KΩ and its current-related sensitivity is 378V/AT, with appropriated size and geometry. Its fully isolated structure guarantees high resistance stability for precise measurement. The vertical Hall device utilizes a deep magnetic-sensitive well to provide more space for the rotation of current. By optimizing the position of the Hall electrodes and the width of the device, the input resistance is measured at 10.4kΩ and the current-related sensitivity of the vertical Hall device reaches 161V/AT. The proposed 3D Hall device indicates the cost-efficient feasibility of fabricating high-performance Hall sensor chips on the 0.15μm BCD platform.

6 January 2025 in IEEE Transactions on Circuits and Systems I: Regular Papers
Verified
Journal Article
Closed access
JXJianlin Xia
Jianlin Xia
YLYongjia Li
Yongjia Li
WQWeiyue Qu
Weiyue Qu
ZFZhongyuan Fang
Zhongyuan Fang
JWJin Wu
Jin Wu
WSWeifeng Sun
Weifeng Sun
In this paper, an RC relaxation oscillator exhibiting robust performance over an extended temperature and supply range is proposed. By incorporating a digitally-assisted calibration loop, the design eliminates the errors from switch on-resistance, comparator offset and propagation delay. Fabricated using a 180 nm bipolar-CMOS-DMOS (BCD) process technology, the oscillator operates at a frequency of 7MHz with the supply sensitivity of 870 ppm/V across a voltage range of 1.7 to 4.2 V. The evaluation of 40 untrimmed samples achieved an average temperature coefficient (TC) of 52 ppm/°C from −40°C to $165~^{\circ }$ C, with the worst observed TC being 81 ppm/°C. The aging test results indicate small deviations of 0.3% and 11% in the oscillation frequency and its TC, respectively. Furthermore, the direct power injection test confirms its reliability and robustness with a maximum error of oscillation frequency of 6.4%.

24 October 2023 in IEEE Transactions on Circuits and Systems II: Express Briefs
Verified
Journal Article
Closed access
HFHaonan Fan
Haonan Fan
ZFZhongyuan Fang
Zhongyuan Fang
YLYongjia Li
Yongjia Li
QQQinsong Qian
Qinsong Qian
XKXiaozhi Kang
Xiaozhi Kang
WSWeifeng Sun
Weifeng Sun
This paper proposes a MOSFET-only voltage reference with a low temperature coefficient. By leveraging the resistances with positive and negative temperature coefficients in the loop, a voltage reference with a wide temperature range and low temperature coefficient is realized. Through the model analysis, we adjusted the resistance to provide appropriate offset for ZTC-MOS to achieve high-order compensation in a wide temperature range. Compared to the sole ZTC compensation, the proposed design achieves lower temperature coefficient. The chip was designed by the 0.18-μm BCD process and achieves a 3.38-ppm/∘C temperature coefficient in -65∘C to 225∘C from postlayout simulation results, exploiting a novel methodology for power management integrated circuits design for niche hightemperature applications.

5 September 2023 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
MCMinggang Chen
Minggang Chen
YLYongjia Li
Yongjia Li
JSJiawei Shi
Jiawei Shi
SDSong Ding
Song Ding
ZFZhongyuan Fang
Zhongyuan Fang
WSWeifeng Sun
Weifeng Sun
V DS (drain-source voltage) based synchronous rectifiers (SRs) are widely used due to their simplicity and low cost. However, there are still three obvious issues. (1) The premature turn-off caused by parasitic inductance under high frequency. (2) The turn-on propagation delay is typically tens of nanoseconds. (3) Commercial SRs usually have a limited V DS rating of about 200V. To solve the above problems, a high-speed SR (including a customized SR IC and a peripheral circuit) is proposed. A high-speed comparator together with a slope detection circuit is proposed to reduce the turn-on delay, and the proposed fully integrated synchronous rectifier IC is implemented in a 1-μm Bipolar process with a die area of 1.47*1.98mm 2 . The peripheral circuit contains the improved dead time compensation circuit, the self-driven high-voltage isolation circuit, and the power supply circuit for SR IC, and the component count is reduced by device reuse. In a 200W DCZVS buck-boost converter prototype, the proposed SR can achieve a switching frequency of more than 700 kHz with minimal dead time, the turn-on propagation delay including peripheral circuits and SR IC is reduced to 8.1 ns, the isolated drain-source voltage is limited to within 10V, and the peak efficiency is 93.6%.

27 August 2024 in IEEE Electron Device Letters
Verified
Journal Article
Closed access
GZGuiqiang Zheng
Guiqiang Zheng
JMJie Ma
Jie Ma
YLYichen Li
Yichen Li
NCNannan Cheng
Nannan Cheng
QZQingyin Zhong
Qingyin Zhong
WSWeifeng Sun
Weifeng Sun
In this letter, a novel silicon-on-insulator (SOI) lateral Hall device (LHD) with deep trench fingers (DTFs) is proposed. The DTFs in magnetic-sensitive well mitigate the short-circuit effect and make current-related sensitivity (S $_{\text {I}}\text {)}$ insensitive to the signal electrode size. The SI of the proposed LHD is over 1000V/AT, the input resistance (R $_{\text {in}}\text {)}$ is around 40.5k $\Omega $ and offset is lower than 2.5mV. With four-phase spinning current method, the residual offset is reduced to $17~\mu $ V and the proposed LHD has high linearity output at a magnetic field from 10mT to 300mT. In addition, the proposed LHD presents high stability across temperature ranging from 25°C to 225°C.