8 November 2024 in IEEE Transactions on Power Electronics
This letter proposes a monolithically integrated bidirectional gate electrostatic discharge protection scheme for p-GaN power high-electron-mobility transistors (HEMTs), in which a dual-gate HEMT is designed as the discharging transistor. With this protection scheme, the forward/reverse transmission line pulsing failure current is enhanced from 0.156 A/0.08 A to 1.36 A/5.26 A, almost without sacrificing performances of the p-GaN power HEMT. Thanks to the bidirectional switching characteristics of the dual-gate device by sharing the drift region, only one discharging transistor is required in the scheme; as a result, the area of this protection scheme can be effectively saved by 40.8% compared to state-of-the-art scheme with the same protection capability.
4 July 2024 in IEEE Transactions on Electron Devices
This brief reports a 200 V all-SiC integration process platform integrating low-voltage (LV) and high-voltage (HV) devices, such as LV nMOS, LV pMOS, resistor, capacitor, HV lateral DMOS (LDMOS), and HV diode. A P-buffer layer is adopted to increase vertical blocking voltage. The high-temperature tolerance of fabricated HV and LV devices are evaluated. Based on the LV and HV devices, a 200 V monolithic all-SiC half-bridge driver composed of a low-side drive circuit and a high-side drive circuit is designed in this brief. Thanks to HV LDMOS and HV diode, the LV drive signal can be converted to an HV signal through the level-shift circuit, which realizes a high-side floating gate driver. Combined with a low-side CMOS driver, a 200 V half-bridge driver operating at 200 ° C has been verified based on this SiC platform.
28 February 2024 in IEEE Sensors Journal
This paper presents a three-dimension (3D) Hall device fabricated on 0.15μm Bipolar-CMOS-DMOS (BCD) platform without additional masks or processes. The 3D Hall device is designed to detect the 3-axis magnetic field in space with lateral and vertical Hall device components. The lateral Hall device features a shallow-trench-isolation (STI) structure and a thin magnetic-sensitive well. The lateral Hall device has an input resistance of 25.1KΩ and its current-related sensitivity is 378V/AT, with appropriated size and geometry. Its fully isolated structure guarantees high resistance stability for precise measurement. The vertical Hall device utilizes a deep magnetic-sensitive well to provide more space for the rotation of current. By optimizing the position of the Hall electrodes and the width of the device, the input resistance is measured at 10.4kΩ and the current-related sensitivity of the vertical Hall device reaches 161V/AT. The proposed 3D Hall device indicates the cost-efficient feasibility of fabricating high-performance Hall sensor chips on the 0.15μm BCD platform.
6 December 2023 in IEEE Transactions on Electron Devices
Compared with the discrete insulated gate bipolar transistor (IGBT), the silicon-on-insulator lateral IGBT (SOI-LIGBT) owns the advantage of being integrated with peripheral circuits easily and is widely used in monolithic intelligent power ICs (PICs). This article reviews the current technologies of SOI-LIGBT. After a brief introduction of monolithic intelligent PIC and LIGBT, a comparison between LIGBTs on SOI and bulk silicon is made. Next, various technologies for improvements in the current density and turn-off speed of SOI-LIGBTs are introduced, and the advantages or disadvantages of these technologies are summarized. Then, the design considerations of reliability and ruggedness for SOI-LIGBT are presented. After that, this article gives an outlook and a prediction for the future technologies of SOI-LIGBT. Finally, a structure that may achieve the breakdown voltage (BV) of 1200 V SOI-LIGBT is proposed in this work.
22 February 2024 in IEEE Electron Device Letters
In this letter, the leakage performances of 4H-SiC CMOS devices, as well as inverter (INV) and NOR logic gate circuits, are evaluated after being exposed to irradiation. It has been observed that the output voltage swing of the SiC INV and NOR gate circuits decreases evidently and large leakage currents appear at the total irradiation dose of 300kGy. The mechanism of leakage current is revealed by conducting Emission Microscope test and analysis of leakage paths based on the layout. The inversion layer forms on the P-epi surface under the polysilicon gate and VDD metal after irradiation, which causes the electron leakage current flowing from N-well to P-epi. At last, suggestion on hardening 4H-SiC CMOS gate circuits is given.
30 August 2024 in IEEE Transactions on Electron Devices
The failure mechanism of single-event burnout (SEB) in 4H-SiC inverter is studied by experiments and simulations. The most sensitive location for heavy ions striking in the 4H-SiC inverter circuit has been identified by pulsed laser experiments. Experimental results demonstrate that the maximum linear energy transfer (LET) value that the 4H-SiC inverter circuit can withstand is exceeding 64.07 MeV $\cdot$ cm $^{\text{2}}$ /mg but not surpassing 92.25 MeV $\cdot$ cm $^{\text{2}}$ /mg. Sentaurus TCAD is utilized to reveal the failure mechanism. The incident heavy-ion radiation triggers the activation of parasitic p-n-p and n-p-n transistors, resulting in a latch-up phenomenon within the circuit, consequently leading to the circuit burnout. The revealed failure mechanism gives a guidance for further hardened circuits design.