A wind power short-term forecasting method based on discrete wavelet transform and long short-term memory networks (DWT_LSTM) is proposed. The LSTM network is designed to effectively exhibit the dynamic behavior of the wind power time series. The discrete wavelet transform is introduced to decompose the non-stationary wind power time series into several components which have more stationarity and are easier to predict. Each component is dug by an independent LSTM. The forecasting results of the wind power are obtained by synthesizing the prediction values of all components. The prediction accuracy has been improved by the proposed method, which is validated by the MAE (mean absolute error), MAPE (mean absolute percentage error), and RMSE (root mean square error) of experimental results of three wind farms as the benchmarks. Wind power forecasting based on the proposed method provides an alternative way to improve the security and stability of the electric power network with the high penetration of wind power.
State-of-the-art exoskeletons are typically limited by the low control bandwidth and small-range stiffness of actuators, which are based on high gear ratios and elastic components (e.g., series elastic actuators). Furthermore, most exoskeletons are based on discrete gait phase detection and/or discrete stiffness control, resulting in discontinuous torque profiles. To fill these two gaps, we developed a portable, lightweight knee exoskeleton using quasi-direct-drive (QDD) actuation that provides 14 N·m torque (36.8% biological joint moment for overground walking). This article presents 1) stiffness modeling of torque-controlled QDD exoskeletons and 2) stiffness-based continuous torque controller that estimates knee joint moment in real-time. Experimental tests found that the exoskeleton had a high bandwidth of stiffness control (16 Hz under 100 N·m/rad) and high torque tracking accuracy with 0.34 N·m root mean square error (6.22%) across 0–350 N·m/rad large-range stiffness. The continuous controller was able to estimate knee moments accurately and smoothly for three walking speeds and their transitions. Experimental results with eight able-bodied subjects demonstrated that our exoskeleton was able to reduce the muscle activities of all eight measured knee and ankle muscles by 8.60%–15.22% relative to the unpowered condition and two knee flexors and one ankle plantar flexor by 1.92%–10.24% relative to the baseline (no exoskeleton) condition.
7 July 2022 in IEEE Transactions on Systems, Man, and Cybernetics: Systems
This article presents a disassembly task planning algorithm considering human–robot collaboration (HRC) and human behavior prediction (HBP). Unlike assembly procedures, the disassembly of end-of-life (EOL) products has been a labor-intensive process with uncertainties difficult to cope with. Meanwhile, it is usually challenging to obtain an optimal sequence efficiently without excessive computational cost. Also, the conventional human-centered task planning, in which the robot has to halt frequently due to unsafe interruptions by human motions, may decrease the efficiency of the disassembly process. In this article, a sequence planner is proposed to assign tasks in real time between a human operator and a robot to overcome the aforementioned challenges. The cost function includes the effort of the human and the robot in terms of both movement distance and time spent on the tasks. The constraints include the disassembly rules and the safety of the human operation. The optimal sequence is generated by solving an optimization problem in a receding-horizon way. In particular, at each step, the proposed disassembly sequence planner locates the workers (a human operator and a robot) and the to-be-disassembled components, predicts human movement for the next several steps, and obtains the optimal disassembly sequence for the next several steps following disassembly rules and safety constraints. Experiments have been extensively conducted on the disassembly of a wooden toybox and a used hard disk drive (HDD) to validate the proposed disassembly sequence planner. The planner has successfully generated the disassembly sequence in an HRC setting explicitly considering real-time human motion prediction and assigned the human operator and the robot to collaboratively complete disassembly tasks without violating disassembly rules and safety constraints.
4 December 2023 in Journal of Manufacturing Science and Engineering
Product disassembly plays a crucial role in the recycling, remanufacturing, and reuse of end-of-use (EoU) products. However, the current manual disassembly process is inefficient due to the complexity and variation of EoU products. While fully automating disassembly is not economically viable given the intricate nature of the task, there is potential in using human–robot collaboration (HRC) to enhance disassembly operations. HRC combines the flexibility and problem-solving abilities of humans with the precise repetition and handling of unsafe tasks by robots. Nevertheless, numerous challenges persist in technology, human workers, and remanufacturing work, which require comprehensive multidisciplinary research to address critical gaps. These challenges have motivated the authors to provide a detailed discussion on the opportunities and obstacles associated with introducing HRC to disassembly. In this regard, the authors have conducted a review of the recent progress in HRC disassembly and present the insights gained from this analysis from three distinct perspectives: technology, workers, and work.
15 May 2024 in IEEE Robotics and Automation Letters
Predicting human motion plays a crucial role in ensuring a safe and effective human-robot close collaboration in intelligent remanufacturing systems of the future. Existing works can be categorized into two groups: those focusing on accuracy, predicting a single future motion, and those generating diverse predictions based on observations. The former group fails to address the uncertainty and multi-modal nature of human motion, while the latter group often produces motion sequences that deviate too far from the ground truth or become unrealistic within historical contexts. To tackle these issues, we propose TransFusion, an innovative and practical diffusion-based model for 3D human motion prediction which can generate samples that are more likely to happen while maintaining a certain level of diversity. Our model leverages Transformer as the backbone with long skip connections between shallow and deep layers. Additionally, we employ the discrete cosine transform to model motion sequences in the frequency space, thereby improving performance. In contrast to prior diffusion-based models that utilize extra modules like cross-attention and adaptive layer normalization to condition the prediction on past observed motion, we treat all inputs, including conditions, as tokens to create a more practical and effective model compared to existing approaches. Extensive experimental studies are conducted on benchmark datasets to validate the effectiveness of our human motion prediction model.
29 May 2023 in IEEE/ASME Transactions on Mechatronics
While the disassembly of high-precision electronic devices is a predominantly labor-intensive process, collaborative robots provide a promising solution through human–robot collaboration. To ensure efficient yet safe collaboration, this article presents a new way to generate task-constrained and collision-free motion for a collaborative robot operating in a dynamic environment involving human movement, which is traditionally challenging due to the high degree of freedom of the corobot and the uncertainty nature of human motion. We first establish a neural human motion prediction model with quantified uncertainty, and then optimize the configuration of the robot online by taking the human motion and uncertainties into consideration. While such rationale is straightforward in nature, our method explicitly quantified the uncertainty of the neural human prediction model to further enhance the collaboration safety, and integrated the quantified uncertainty into the task-satisfied motion planning in real time to efficiently conduct tasks. Extensive experimental tests and comparison studies have been conducted to validate the efficiency and effectiveness of the proposed planning method.