The incorporation of carbon nanotubes (CNTs) enhances the mechanical performance of rubber composites. This study examines the effect of single-walled CNTs (1–4 phr) on the properties of a natural rubber compound for sealing applications, both before and after thermal aging, as prolonged exposure to elevated temperatures can alter material properties, affecting durability and functionality. The researched nanocomposites were subjected to a series of mechanical tests, dynamic mechanical analysis, and surface investigation using atomic force microscopy (AFM). After adding 4 phr of CNTs, tensile and tear strength increased by 11.73% and 14.64%, respectively, while aging-related strength degradation was reduced by 5%. CNTs also increased complex modulus and hardness but reduced elongation at break and rebound resilience. Residual deformation in tensile and compressive set tests decreased. AFM analysis confirmed improved surface stability after thermal aging compared to the CNT-free compound.
The article investigates the effect of diffusion plasma exposure time (30 s, 60 s) on the physicochemical properties of the surface of a natural rubber-based composite. X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) with dispersive X-ray spectroscopy (EDS) were used to assess the properties. Wettability and surface free energy tests were also performed. The application of plasma leads to surface oxidation (EDS). The obtained properties did not change for 21 days, and the plasma exposure time had no significant effect on the physicochemical changes of the composite surface.
Plasma technology based on diffuse coplanar surface barrier discharge DCSBD represents novel method of economic, efficient and versatile way of materials treatm
The effect of UV radiation on infrared spectra (FT-IR) and mass change of elastomers (IR, BR, SBR) was studied. It was found that with the extension of the UV radiation time the intensity of bands originating from hydroxyl and carbonyl groups increased. Carbonyl groups were identified in SBR after 30 h of exposure, while in IR and BR after 18 h. It was shown that SBR was characterized by the highest resistance to UV radiation.
1 November 2021 in IOP Conference Series: Materials Science and Engineering
The aim of the work was to determine the influence of liquid rubber on selected properties of rubber compound and its vulcanizates. Due to the liquid form of this rubber, it is not possible to completely replace the conventional solid rubber used in the mixture because of problems in further processing. In four experimental tests, we used different amounts of liquid rubber in the recipe together with butadiene-styrene rubber and the compounds we mixed according to the general conditions. We studied the curing characteristics of prepared mixture and we measuremend physical and mechanical properties of study vulcanizates and summarized the individual measured values for each parameter and suggested the greatest importance of the recipe for rubber practice.
Today, liquid rubber has an increasing share in rubber compounds, mainly due to its leading properties. Due to its liquid consistency, liquid rubber cannot be used in a mixture alone and is therefore used in combination with synthetic rubber. Liquid rubber can significantly affect the properties of rubber compounds as well as its vulcanizates. In this work, we studied changes in the investigated parameters of rubber compounds and their vulcanizates. We mixed four experimental samples, where we used different amounts of liquid rubber together with butadiene-styrene rubber in the recipe. Other raw materials as well as the mixing process remained unchanged. We prepared rubber compounds according to general conditions and rules. In this work, we investigated the effect of liquid rubber on the following parameters: RPA, viscosity and we also discussed the Dynamic mechanical thermal analysis method. We summarized and measured all measured values in the form of graphs and tables for each examined parameter.