The application of DCSBD (Diffuse Coplanar Surface Barrier Discharge) plasma is referred to as the surface modification/activation of materials. The exposure of material surfaces to DCSBD plasma is initiated by changes in their chemical composition, surface wettability and roughness. The given study presents the mentioned plasma application in the context of the modification of the material viscoelastic properties, namely the PVC polymer film. The measurement of viscoelastic properties changes of PVC was primarily examined by a sensitive thermal method of dynamic-mechanical analysis. This analysis allows identifying changes in the glass transition temperature of PVC, before and after DCSBD plasma application, Tangens Delta, supported by glass transition temperatures of Elastic and Loss modulus. The results of the present study prove that DCSBD plasma applied on both sides to PVC surfaces causes changes in its viscoelastic properties. In addition, these changes are presented depending on the variability of the material position, with respect to the winding of the electrodes in the ceramic dielectric generating the DCSBD plasma during modification. The variability of the PVC position holds an important role, as it determines the proportion of filamentous and diffuse components of the plasma that will interact with the material surface during modification. The application of DCSBD plasma must, therefore, be considered a complex modification of the material, and as a result, non-surface changes must also be considered.
15 February 2011 in Journal of Thermal Analysis and Calorimetry
This paper develops a technology for manufacturing a biocomposite using post-production wood waste as filler, but also as an alternative material that can substitute traditional composites. Three types of post-production wood waste, i.e., ash wood chips, oak chips and medium-density wood fiberboard (MDF), were used in this study. Three different biocomposites were produced for each of these materials, differing in the content of waste to polymer. The biodegradable and compostable bioplastic Mater-Bi (CF05S) was obtained using the pioneering proprietary technologies of Novamont company using starches, cellulose, vegetable oils and their combinations. Mater-Bi was used as the matrix of the composite, which, due to its chemical composition, allows the production of fully biodegradable composites. The physicochemical properties, such as static tensile, impact, water absorption and hardness, were investigated. The results provide the basis for a detailed analysis of the properties of the biocomposites and made it possible to accurately determine their properties. The results show that the optimal solution is the Mater-Bi biocomposite with 20 wt.% oak filler content, which shows the most favorable adhesion strength and water absorption. The research conducted here is in the context of issues related to sustainability and a circular economy, through waste management, as well as through the production of biodegradable construction products.
2 February 2022 in Continuum Mechanics and Thermodynamics
The influence of low-temperature plasma modification of bentonite on the dynamic-mechanical properties and vulcanization of rubber mixtures was examined. EDX, FTIR and TGA analysis were used to evaluate the filler. IR spectra of modified bentonite indicate lower intensity of the bands associated with OH groups and water. TGA confirms a smaller weight loss of samples subjected to plasma treatment, which also proves a lower water content in the mineral, confirming the effectiveness of the plasma treatment used.