Recent developments within the field of medium voltage wide-bandgap semiconductor devices are drawing attention from both researchers and industries due to the demanding requirements for more efficient high-power energy conversion. The rapid development has entailed an increased awareness of the negative impact of the increased rate of change in voltage, d v /d t , and its derived issues caused by the inevitable parasitic capacitive couplings. This article is dedicated to present an overview of the parasitic capacitive couplings in high-power medium voltage power electronic converter systems, using an example reference system enabled by medium voltage SiC mosfet s. The definitions of capacitive couplings are presented and the impacts raised by parasitic capacitive couplings are reviewed. In addition, the similarities of different capacitive couplings introduced by components in practical medium voltage systems are presented and summarized. Lastly, the challenges and future work with respect to parasitic capacitive couplings in medium voltage power electronics converter systems are shared from the authors' perspective.
30 January 2024 in IEEE Transactions on Power Electronics
Film capacitors for ac filtering play a crucial role in various industrial applications, such as wind power and traction systems. However, current research lacks studies on the aging and failure analyses of high-power ac film capacitors subjected to realistic stresses. This article addresses this gap by presenting degradation testing and failure analysis of metallized film capacitors employed in megawatt (MW) power converters for ac filtering purposes. First, accelerated aging tests are performed on ac filter capacitors based on realistic stresses for more than 3500 h. Testing results on electrothermal parameters are recorded, and derivative models of parameter aging are obtained. The analysis reveals that electrochemical corrosion is the primary aging factor, with negligible capacitance reduction until catastrophic failure occurs. Further investigation, including temperature rise results and microstructure evaluation, indicates that the melting of the dielectric film is a crucial precursor to catastrophic failure. Finally, the possible degradation and failure mechanisms for this type of ac filtering capacitors are summarized. The observations provide a new perspective on the possible failure mechanisms and condition monitoring of film capacitors in ac filtering applications.
Thermal impedance of IGBT modules may vary with operating conditions due to that the thermal conductivity and heat capacity of materials are temperature dependent. This paper proposes a Cauer thermal model for a 1700 V/1000 A IGBT module with temperature-dependent thermal resistances and thermal capacitances. The temperature effect is investigated by Finite Element Method (FEM) simulation based on the geometry and material information of the IGBT module. The developed model is ready for circuit-level simulation to achieve an improved accuracy of the estimation on IGBT junction temperature and its relevant reliability aspect performance. A test bench is built up with an ultra-fast infrared (IR) camera to validate the proposed thermal impedance model.
This study explores the effect of vibrations generated by wind turbines on the lifespan of the IGBT module. Since wind turbines operate under varying dynamic loads, they produce vibrations that might influence the performance and longevity of electronic components like IGBTs. To investigate this concern, a modal analysis was carried out using the finite element analysis (FEA) in ANSYS to identify the natural frequencies of the module. These frequencies were then compared with typical load frequencies encountered in wind turbine operations. Furthermore, random vibration analysis, incorporating power spectral density (PSD), was conducted to assess the module’s deformation under stochastic vibration conditions. The simulation results demonstrated that the IGBT module located inside the wind turbine nacelle has an exceptionally long operational lifetime under random vibration conditions. This indicates that the impact of vibrations on the module’s durability is minimal. As a result, this study concludes that vibrations induced by wind turbine operations pose no significant threat to the lifespan of the IGBT module, reinforcing its reliability in power electronic systems, even in vibration-prone environments.
1 November 2026 in IEEE Transactions on Power Electronics