Exploiting ambipolar electrical conductivity based on graphene field‐effect transistors has raised enormous interest for high‐frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V‐shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities, especially in the HF domain. This study presents new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene‐based transistors.
Ambipolar conductance in graphene field-effect transistors (GFETs), and in particular their quasi-quadratic I–V transfer characteristic, makes these devices excellent candidates for exploiting subharmonic mixing at high frequencies. Several realizations have already demonstrated the ability of GFETs to compete with, or even improve, state-of-the-art mixers based on traditional technologies. Nonetheless, a systematic analysis of the influence on performance of both circuit design and technological aspects has not been conducted yet. In this work, we present a comprehensive assessment of the conversion losses by means of applying radio-frequency circuit design techniques in terms of filtering and matching, along with the impact stemming from physical and geometric variations of a fabricated graphene technology.
This work presents the performance projection of a metal-insulator-graphene diode as the building block of a radiofrequency power detector, highlighting its rectifying figures of merit. The analysis was performed by means of a computer-aided design tool validated with experimental measurements of fabricated devices. Transient simulations were used to accurately determine the detector output voltage, while particular consideration was given to suitable convergence of the non-linear circuit response. The diode was analyzed in both ideal and non-ideal cases, with the latter accounting for its parasitic effects. In the non-ideal case, the diode exhibited a tangential responsivity of 26.9 V/W at 2.45 GHz and 31.9 V/W at 1.225 GHz. However, when parasitic elements were neglected in the ideal case, the responsivity significantly increased to 47.3 V/W at 2.45 GHz and 38.7 V/W at 1.225 GHz. Additionally, the diode demonstrated a non-linearity of 6.64 at 0.7 V and an asymmetry of 806.6 in a bias window of ±1 V, which resulted in a competitive value compared to other state-of-the-art rectifying technologies. Tangential responsivities () of graphene diodes at less-studied frequencies in the gigahertz band are presented, showing a high value of 63.7 V/W at 1 GHz.
9 September 2026 in npj 2D Materials and Applications
Graphene intrinsic carrier ambipolarity enables unique circuit functionalities that would otherwise require significantly more complex circuit topologies to achieve with conventional semiconductors. Yet, translating these properties into practical, wafer-scale electronic systems remains a significant challenge. Here, we present an experimental proof of concept of a reconfigurable frequency multiplier based on a single split-gate graphene field-effect transistor. The devices used for this demonstration were externally fabricated through a multi-project wafer tape-out of the 2D Experimental Pilot Line, an initiative aimed at providing a scalable platform service for the manufacturing of 2D-material-based devices and circuits. The split-gate architecture synthesizes a W-shaped transfer characteristic within a single device enabling electrically reconfigurable frequency multiplication by factors of × 2, × 3, and × 4 without requiring multiple transistors or fixed fabrication-dependent tuning mechanisms. Time-domain measurements and spectral analysis confirm harmonic reconfiguration, yielding spectral purities of 48% for the doubler, 69% for the tripler, and 19% for the quadrupler at an input frequency of 100 kHz. This constitutes the first demonstration of a reconfigurable circuit using devices from the multi-project wafer 2D-EPL platform, representing a step forward in the integration complexity achievable with wafer-scale graphene technology.