We present a graphene-based phase shifter for radio-frequency (RF) phase-array applications. The core of the designed phase-shifting system consists of a graphene field-effect transistor (GFET) used in a common source amplifier configuration. The phase of the RF signal is controlled by exploiting the quantum capacitance of graphene and its dependence on the terminal transistor biases. In particular, by independently tuning the applied gate-to-source and drain-to-source biases, we observe that the phase of the signal, in the super-high frequency band, can be varied nearly 200° with a constant gain of 2.5 dB. Additionally, if only the gate bias is used as control signal, and the drain is biased linearly dependent on the former (i.e., in a completely analogue operation), a phase shift of 85° can be achieved making use of just one transistor and keeping a gain of 0 dB with a maximum variation of 1.3 dB. The latter design can be improved by applying a balanced branch-line configuration showing to be competitive against other state-of-the-art phase shifters. This work paves the way towards the exploitation of graphene technology to become the core of active analogue phase shifters for high-frequency operation.
Exploiting ambipolar electrical conductivity based on graphene field‐effect transistors has raised enormous interest for high‐frequency (HF) analog electronics. Controlling the device polarity, by biasing the graphene transistor around the vertex of the V‐shaped transfer curve, enables to redesign and highly simplify conventional analog circuits, and simultaneously to seek for multifunctionalities, especially in the HF domain. This study presents new insights for the design of different HF applications such as power amplifiers, mixers, frequency multipliers, phase shifters, and modulators that specifically leverage the inherent ambipolarity of graphene‐based transistors.
24 September 2021 in IEEE Transactions on Electron Devices
We present a physics-based circuit-compatible model for pH-sensitive field-effect transistors based on 2-D materials. The electrostatics along the electrolyte-gated 2-D-semiconductor stack is treated by solving the Poisson equation, including the site-binding model and the Gouy-Chapman-Stern approach, while the carrier transport is described by the drift-diffusion theory. The proposed model is provided in an analytical form and then implemented in Verilog-A, making it compatible with standard technology computer-aided design tools employed for circuit simulation. The model is benchmarked against two experimental transition-metal-dichalcogenide (MoS₂ and ReS₂)-based ion sensors, showing excellent agreement when predicting the drain current, threshold voltage shift, and current/voltage sensitivity measurements for different pH concentrations.
A compact model able to predict the electrical read-out of field-effect biosensors based on two-dimensional (2D) semiconductors is introduced. It comprises the analytical description of the electrostatics including the charge density in the 2D semiconductor, the site-binding modeling of the barrier oxide surface charge, and the Stern layer plus an ion-permeable membrane, all coupled with the carrier transport inside the biosensor and solved by making use of the Donnan potential inside the ion-permeable membrane formed by charged macromolecules. This electrostatics and transport description account for the main surface-related physical and chemical processes that impact the biosensor electrical performance, including the transport along the low-dimensional channel in the diffusive regime, electrolyte screening, and the impact of biological charges. The model is implemented in Verilog-A and can be employed on standard circuit design tools. The theoretical predictions obtained with the model are validated against measurements of a MoS2 field-effect biosensor for streptavidin detection showing excellent agreement in all operation regimes and leading the way for the circuit-level simulation of biosensors based on 2D semiconductors.
The Dirac voltage of a graphene field-effect transistor (GFET) stands for the gate bias that sets the charge neutrality condition in the channel, thus resulting in a minimum conductivity. Controlling its dependence on the terminal biases is crucial for the design and optimization of radio-frequency applications based on multiple GFETs. However, the previous analysis of such dependence carried out for single devices is uncomplete and if not properly understood could result in circuit designs with poor performance. The control of the Dirac point shift (DPS) is particularly important for the deployment of graphene-based differential circuit topologies where keeping a strict symmetry between the electrically balanced branches is essential for exploiting the advantages of such topologies. This note sheds light on the impact of terminal biases on the DPS in a real device and sets a rigorous methodology to control it so to eventually optimize and exploit the performance of radio-frequency applications based on GFETs.
Ambipolar conductance in graphene field-effect transistors (GFETs), and in particular their quasi-quadratic I–V transfer characteristic, makes these devices excellent candidates for exploiting subharmonic mixing at high frequencies. Several realizations have already demonstrated the ability of GFETs to compete with, or even improve, state-of-the-art mixers based on traditional technologies. Nonetheless, a systematic analysis of the influence on performance of both circuit design and technological aspects has not been conducted yet. In this work, we present a comprehensive assessment of the conversion losses by means of applying radio-frequency circuit design techniques in terms of filtering and matching, along with the impact stemming from physical and geometric variations of a fabricated graphene technology.