The inherent complexity of the decision-making process in early-stage mining projects demands high-risk investments, often based on limited and low-confidence data. The geometallurgical approach offers an opportunity to mitigate uncertainties through the development of mathematical models to predict key process variables, such as recovery and specific energy. This research quantifies the economic and technical impact of incrementally increasing the number of variables in a geometallurgical model of a copper-gold-silver polymetallic deposit during the Pre-Feasibility Study (PFS) phase. Regression models were developed to correlate grades (copper, gold, and silver) and metallurgical variables (recovery and specific energy). The models were applied to eight geometallurgical block models, and technical and economic results were generated using Direct Block Sequencing (DBS). Across all scenarios, increased model complexity had a modest effect on production metrics but caused notable variation in Net Present Value (NPV), reaching a 6.92% difference between scenarios. Thus, adding more geometallurgical variables is justified not by higher production tonnage but by the potential to enhance and stabilize NPV through improved sequencing based on key value drivers (costs, recoveries and processing time). These findings highlight the value of early geometallurgical modeling, even with limited data, for producing a more integrated and improved economic assessment.
1 January 2025 in Tecnologia em Metalurgia, Materiais e Mineração
Geometallurgy is an approach that utilizes predictive models that can support business decisions, mitigate risks, and enhance production efficiency. To develop an accurate geometallurgical model, it is essential to understand the behavior of each lithology within the ore body through geometallurgical testing. In this context, the present study aims to evaluate the performance of bench-scale tests conducted on the main mining fronts of a zinc mine operation located in Brazil. The mineral processing plant was designed to process lead and zinc sulfide ores without material stockpiling, where all ores extracted from the underground mine are immediately processed. The geometallurgical characterization was conducted through the following steps: sampling, crushing, grinding, and flotation. The recovery, concentrate, and tailing contents during the flotation stages of galena and sphalerite were analyzed. A mineralogical characterization using a Mineral Liberation Analyzer (MLA) was performed to assess the degree of particle liberation and mineral associations within the studied mining fronts. The results indicate that a higher degree of pyrite liberation leads to greater metallurgical recovery of mineralized bodies A (breccia-hosted orebody), B (sphalerite-rich doloarenite orebody), and C (upper replaced stratiform orebody). Among these, mineralized body C presents the highest recovery in the zinc and lead stages, with 99.5% and 86.2%, respectively.
1 March 2024 in REM - International Engineering Journal
Recent events involving iron ore tailings dam collapses have emphasized the need for developing alternative ways of depositing tailings. This study aims to evaluate the effects of using three hydroxamates and a sulfosuccinamate as collectors in the direct flotation of iron ore tailings, using a bench flotation. The best result obtained on bench flotation was tested in a pneumatic cell. The sample used in this study (10.8% of Fe) consists of quartz and hematite. The Aero® 6494 Promoter hydroxamate showed the highest selectivity among the analyzed reagents, reaching 64.31% of Fe in the final product of the test with the < 150 µm sample. The possibility of using these reagents as constituents of a mixed collector with dodecylamine was also investigated. In this case, the Aero® 845 Promoter sulfosuccinamate yielded the best results, with 62.84% of Fe and 59.01% of metallurgical recovery of Fe. The synergistic effect between the two reagents might be explained by the stability of the monolayer formed by the intercalation of the ions from the dodecylamine and the Aero® 845 Promoter, which reduces the electrostatic repulsion between ions of the same species This mixed collector was tested in a pneumatic cell. However, it had a lower performance in terms of Fe metallurgical recovery than in a bench-scale cell test, mainly for the finest particles, due to the greater control of the process’s variables in the bench cell.
1 January 2024 in Tecnologia em Metalurgia, Materiais e Mineração