For precise measurement of the moment of inertia (MOI) of asymmetric objects, using an air bearing torsional pendulum, the nonlinearity of the torsion bar and the damping effect caused by the interaction between air and sample need to be included in the analysis. The instantaneous undamped natural frequency and instantaneous damping coefficient of the motion are obtained from the Hilbert transform of the angular displacement signal and are used for data fitting to calculate the MOI. Measurements for algorithm verification were made using a special sample with large windvanes to increase the damping effect. The nonlinear analysis of the MOI experimental results indicated a relative error of less than 0.1% compared with 0.3% for classical linear analysis of the data.
This paper considers tracking control of non-affine pure-feedback systems with uncertain disturbances. The “explosion of complexity” in the process of backstepping design is eliminated by introducing the output of first-order filter to replace the derivative of virtual control signal. The mean-value theorem is utilized to overcome the non-affine difficulties appearing from the pure-feedback systems. By employing fuzzy logic systems (FLSs) and dynamic surface approach, an adaptive fuzzy controller with only one adaptive parameter is presented. Stability analysis shows that the proposed control method guarantees that all closed-loop system signals are semi-globally uniformly ultimately bounded. The main innovations of this paper are that the final gain function is viewed as an adjustable constant gain in the procedure of actual control signal design and the FLSs only handle state errors and disturbances. The new controller not only has the advantages of tracking performance, but it also reduces the computational burden in comparison with traditional adaptive backstepping method whose FLSs need to tackle with all gain function and system dynamics. A comparison simulation example shows the effectiveness of the proposed controller.
This study aims to construct a graded evaluation method for the construction quality of Highway Prefabricated Beam Bridges, in order to support refined quality control beyond the traditional “qualified/unqualified” judgment. Existing evaluation methods have difficulty effectively distinguishing quality differences within the qualified range, may cause redundant calculations for indicator information with non-linear correlations, are susceptible to the influence of outlier expert judgments, and may mask local critical defects when adopting linear weighted aggregation. This paper uses historical quality inspection and expert evaluation records from 50 prefabricated beam bridges to validate the proposed method. Experimental results show that the proposed method achieves an RMSE of 1.24, outperforming the traditional AHP method (1.79) and the equal-weight method (2.52). Five-fold grouped cross-validation at the bridge level gave an RMSE of 1.2180 ± 0.0802 and an R2 of 0.9536. It can provide accurate intelligent decision support for quality and safety control during the construction of Highway Prefabricated Beam Bridges, and promotes the digital upgrade of quality management in the construction industry. The proposed framework can be integrated into a digital construction quality management platform to support bridge quality ranking and early warning of safety-critical defects. The originality of this paper lies in the integration, within a unified evaluation framework, of continuous score conversion based on probability distributions, manifold-learning-based redundancy correction for indicators, geometrically median-based robust fusion of expert weights, and a threshold-triggered risk-sensitive weight adjustment mechanism.
11 November 2025 in Journal of Control and Decision
The durability characteristics of inorganic mixtures incorporating recycled aggregates from rural residential construction and demolition waste with high red brick content remain inadequately elucidated. To illuminate their long-term serviceability, two types of recycled aggregate inorganic mixtures (RAIMs) were formulated and implemented in a test road section, with their mechanical properties and fatigue resistance systematically monitored and assessed. Comparative analysis indicated that RAIMs exhibit comparable resistance to permanent deformation and analogous fracture failure mechanisms to natural aggregate inorganic mixtures (NAIMs), yet their elastic deformation recovery capability is compromised. Specifically, RAIMs attained parity with NAIMs in terms of unconfined compressive strength, indirect tensile strength, flexural tensile strength, and static compressive resilient modulus. However, their dynamic compressive resilient modulus, indirect tensile resilient modulus, and flexural tensile resilient modulus were lower than those of NAIMs by over 30%. Furthermore, probabilistic fatigue prediction models for RAIMs were established, facilitating reliable estimation of the service life of RAIMs under various stress intensity levels. This study holds considerable significance for dispelling the inherent perception of RAIMs’ inferior service performance and augmenting the theoretical foundation for their resourceful utilization in road engineering.
During long-term monitoring, data missing often happens due to environmental interference, sensor malfunction or transmission problems, which will threaten the effectiveness of structural health monitoring. This study proposes an anchor-constrained residual stacking method, which can improve data reconstruction performance relative to individual models across diverse missing patterns while reducing the risk of performance degradation associated with unconstrained ensemble learning. The method adopts a two-level stacking framework in which heterogeneous base learners generate candidate reconstructed data and grouped out-of-fold predictions are used to select an anchor learner for different missing patterns. A residual meta-learner then learns complementary residual information relative to the anchor learner, while validation-gated fusion regulates residual correction and final fusion based on reserved validation data, reducing unreliable fusion contributions. The effectiveness of the proposed method is verified using monitoring data with different missing patterns from a steel stringer bridge under multiple structural states. It achieves a coefficient of determination () of 0.9020, together with the lowest relative root mean square error (RRMSE) and mean absolute error (MAE) among the compared methods. Operational modal analysis further confirms that the method preserves the main dynamic characteristics of structural responses, supporting reliable reconstruction across diverse missing patterns and multiple structural states.