The purpose of this study is to generate some experimental data associated with the thermal heat exchange between an oil jet flow and a rotating gear. To this end, a specific test bench was designed. The principle of this test bench is to inject oil heated to a temperature of about 80 °C onto a rotating test sample at ambient temperature. Temperature measurements of the oil via injection nozzles and the rotating component allow the determination of the heat flow between these elements using a numerical method developed to this end. This test rig enables the study of the parameters that may affect heat exchange, such as oil flow rate and injection temperature, nozzle geometry and position, gear rotational speed and tooth geometry, or oil characteristics. In this study, three of these parameters were investigated, namely the test sample rotational speed, the oil flow rate, and the oil jet velocity. The experiments were conducted on an aluminum disc and spur gear. Subsequently, the experimental results were compared with existing models that represent the convective exchanges between oil and a gear. Some discrepancies between existing models and experimental results appear at high rotational speeds, underlining that the convective heat transfer does not always increase with this parameter.
4 June 2025 in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
This study aims to analyze thermal heat-transfer between an oil jet and a rotating spur gear using a novel experimental methodology 1 to have an analytical model based on lubrication conditions and geometric characteristics of spur gears. Based on existing theoretical formulations and advanced visualization techniques implemented on a test bench. The use of a high-speed image acquisition system allowed the identification of three distinct phases, depending on the gear rotational speed, which led to the development of the heat-transfer model. This research considers various types of spur gears to account for geometric variations and different lubrication conditions, namely different oil jet flow rates and/or nozzle diameters. These results provide a new perspective on understanding convective transfers in mechanical transmissions.
This study aims to develop a new model for windage losses, building upon existing formulation, complemented by dedicated experimental campaigns and a specific methodology designed to isolate and quantify windage losses. The model relies on an analytical approach to flow characterization, incorporating a correction factor accounting for air density reduction. The experimental investigation was carried out on a dedicated test bench and includes both spur and helical gears. The results demonstrate good agreement between the proposed model and the experimental data, with and without the presence of nearby obstacles, such as side flanges, highlighting the model’s robustness across different configurations. The proposed windage loss model reproduces the experimental results with significantly greater accuracy than the original one, yielding relative deviations below 5% compared to almost 20% for spur gears, and below 9% compared to over 21%, and in some cases up to 50%, for helical gears.
Dans un contexte où la réduction des émissions de gaz à effet de serre constitue un enjeu majeur pour le secteur aéronautique, l'amélioration de l'efficacité énergétique des transmissions mécaniques par engrenages est devenue une priorité. Ces transmissions, soumises à des régimes de fonctionnement sévères et à des exigences de fiabilité élevées, doivent conjuguer performance et compacité. Dans ce cadre, les pertes de puissance générées au sein des engrenages à haute vitesse, ainsi que les transferts thermiques associés à la lubrification, sont des éléments clés à maîtriser. Il est établi que les pertes ne se limitent pas aux frottements au niveau du contact d'engrènement, mais incluent également des contributions importantes liées à la ventilation des composants en rotation et à l'interaction avec le fluide de lubrification. L'échange de chaleur entre le lubrifiant et la transmission par engrenages est important à gérer avec l'exigence de performance et de compacité dans le cas d'une transmission à haute vitesse avec une lubrification par injection d'huile. Le travail présenté dans ce manuscrit a pour but de caractériser expérimentalement et modéliser analytiquement les pertes de puissance ainsi que les transferts thermiques sur des roues dentées lubrifiées par injection d'huile, pour des configurations représentatives de transmissions aéronautiques. Deux bancs d'essai complémentaires ont été développés pour étudier, d'une part, les pertes par ventilation dans l'air sur différents types de dentures (droite, hélicoïdale, chevron), et d'autre part, les échanges thermiques entre l'huile injectée et les roues dentées en rotation. Les résultats expérimentaux ont permis de proposer deux modèles complémentaires : un modèle de pertes intégrant un facteur de densité corrigé pour représenter l'effet de confinement, et un modèle thermique, couplant le coefficient d'échange convectif à la surface mouillée par l'huile sur la denture en rotation. Les approches développées permettent une meilleure compréhension des mécanismes de dissipation et de refroidissement dans les engrenages à haute vitesse, et constituent des outils de dimensionnement pertinents, à la fois pour limiter les pertes de puissance grâce au modèle de pertes par ventilation, et pour optimiser les conditions de lubrification par injection à partir du modèle thermique, en réponse aux exigences de performance et de durabilité du secteur aéronautique.