Pipes may have leakage, breakage and local blockage during the long-term service period, which may lead to insufficient flow velocity and low water-supply pressure. Therefore, measuring flow velocity in pipes is crucial for diagnosing damage, ensuring safe operation and managing maintenance. Current flow velocity measurement techniques exhibit poor stability over long-term measurements in complex environments and the measurement quality is affected by the physical and chemical properties of the transported medium. To address these issues, this study employs distributed optical fiber sensors for measuring flow velocity in water-filled pipes and the effectiveness is validated by the fiber Bragg grating (FBG) sensors. Based on the phase change of optical fiber demodulated by distributed acoustic sensing (DAS) device, the flow velocity is accurately measured. Test results demonstrate a quadratic relationship between flow velocity and phase change of optical fiber based on DAS system, with all fitting effects exceeding 0.95, consistent with theoretical analysis. The influence of different sensor layouts of the distributed optical fibers on the monitoring data is also carefully checked, and the testing results show that bonding the optical fiber on the pipes can achieve better measurement quality, compared to the free optical fiber without constraint around the pipe. This study contributes to improving the measurement accuracy and stability of optical fiber sensors by using the DAS system.
The wide-spread application of carbon fiber-reinforced polymer (CFRP) composites in industrial fields has led to high demand for developing a rapid detection method for assessing the structural performance of CFRP composites in operation based on optical fiber sensing technology. Therefore, the effectiveness and reliability of evaluating the fatigue resistance of CFRP plates based on fiber Bragg grating (FBG) monitoring information were explored. The strain response of CFRP plates at key positions under constant amplitude fatigue load was monitored by bare FBGs in series and packaged quasi-distributed FBGs in series. The structural performance and fatigue resistance characteristics of CFRP plates were evaluated by statistical analysis and fatigue life prediction theory. The validity and accuracy of the test and analysis results were demonstrated by finite element modeling analysis. Compared with the traditional methods that evaluate the structural fatigue performance based on mass destructive experiments, this method significantly improves the detection efficiency and realizes the non-destructive and rapid online evaluation of structural service performance. Research shows that the designed FBG sensors can effectively monitor the strain response of CFRP plate under fatigue load, and the correlated fatigue algorithm can provide feasible and reliable technical approaches for online detection and evaluation on the structural performance of CFRP components.
Carbon fiber-reinforced polymer (CFRP) laminates have been widely coated on aged and damaged structures for recovering or enhancing their structural performance. The health conditions of the coated composite structures have been given high attention, as they are critically important for assessing operational safety and residual service life. However, the current problem is the lack of an efficient, long-term, and stable monitoring technique to characterize the structural behavior of coated composite structures in the whole life cycle. For this reason, bare and packaged fiber Bragg grating (FBG) sensors have been specially developed and designed in sensing networks to monitor the structural performance of CFRP-coated composite beams under different loads. Some optical fibers have also been inserted in the CFRP laminates to configure the smart CFRP component. Detailed data interpretation has been conducted to declare the strengthening process and effect. Finite element simulation and simplified theoretical analysis have been conducted to validate the experimental testing results and the deformation profiles of steel beams before and after the CFRP coating has been carefully checked. Results indicate that the proposed FBG sensors and sensing layout can accurately reflect the structural performance of the composite beam structure, and the CFRP coating can share partial loads, which finally leads to the downward shift in the centroidal axis, with a value of about 10 mm. The externally bonded sensors generally show good stability and high sensitivity to the applied load and temperature-induced inner stress variation. The study provides a straightforward instruction for the establishment of a structural health monitoring system for CFRP-coated composite structures in the whole life cycle.
Timely detection of leaks is essential for the safe and reliable operation of pressure vessels used in superconducting systems, aerospace, and medical equipment. To address the lack of efficient online leak detection methods for such vessels, this paper proposes a quasi-distributed fiber Bragg grating (FBG) sensing network combined with theoretical stress analysis to diagnose vessel conditions. We analyze the stress–strain distributions of vacuum vessels under varying pressures and examine stress concentration effects induced by small holes; these analyses guided the design and placement of quasi-distributed FBG sensors around the vacuum valve for online leakage monitoring. To improve measurement accuracy, we introduce a vibration correction algorithm that mitigates pump-induced vibration interference. Comparative tests under three leakage scenarios demonstrate that when leakage occurs during vacuum extraction, the proposed system can reliably detect the approximate leak location. The results indicate that combining an FBG sensing network with stress concentration analysis enables initial localization and assessment of leak severity, providing valuable support for the safe operation and rapid maintenance of vacuum pressure vessels.
19 September 2026 in Construction and Building Materials