Yerkhat Dauletkhanov

Mr. Yerkhat Dauletkhanov

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
25 May 2026 in Metals
Verified
Journal Article
Open access
PDF file
SKSherzod Kurbanbekov
Sherzod Kurbanbekov
MSMazhyn Kanapinovich Мажын Skakov
Mazhyn Kanapinovich Мажын Skakov
TKTolegen Kaisaruly
Tolegen Kaisaruly
YAYulduz Amangeldiyeva
Yulduz Amangeldiyeva
SRSherzod Ramankulov
Sherzod Ramankulov
YDYerkhat Dauletkhanov
Yerkhat Dauletkhanov
High-entropy alloys and the broader class of compositionally complex alloys have recently attracted significant attention as promising materials for solid-state hydrogen storage. Their potential arises not only from high configurational entropy but also from the possibility of tailoring phase composition, crystal structure, local chemical environment, and defect states that govern hydrogen sorption thermodynamics and kinetics. This review summarizes current understanding of hydrogen interaction mechanisms in HEAs and discusses the role of body-centered cubic (BCC), face-centered cubic (FCC), and Laves phases in determining hydrogen capacity, reversibility, and cyclic stability. The limitations of commonly used descriptors, including valence electron concentration (VEC), atomic size mismatch δ, enthalpy of mixing ΔHmix, and Ω parameter, in predicting hydrogen storage behavior are critically analyzed. Particular attention is given to the effects of processing methods, phase transformations during hydrogenation/dehydrogenation, and the energetic heterogeneity of interstitial sites in multicomponent systems. The review highlights that future progress will depend on the transition from empirical alloy discovery toward physically informed multiparametric design integrating CALPHAD, DFT modeling, machine learning, and in situ/operando characterization techniques for the development of efficient and durable hydrogen storage materials.

1 January 2025 in Open Engineering
Verified
Journal Article
Open access
PDF file
DADanagul Aubakirova
Danagul Aubakirova
ESElfira Sagymbekova
Elfira Sagymbekova
YKYernat Kozhakhmetov
Yernat Kozhakhmetov
Piotr KowalewskiPiotr Kowalewski
Piotr Kowalewski
YDYerkhat Dauletkhanov
Yerkhat Dauletkhanov
AUAzamat Urkunbay
Azamat Urkunbay
This research aims to optimizing the synthesis of Ni–Ti–Cu alloys with shape memory effect (SME) through a combination of mechanosynthesis and spark plasma sintering (SPS). It has been established that the rotation speed (650/750 rpm) and the duration of mechanosynthesis (1–8 h) critically affect the phase composition and morphology of the powders. The speed of the formation of the intermetallic phase NiTi is limited at 650 rpm, whereas it intensifies defect accumulation and amorphization at 750 rpm. X-ray phase analysis and scanning electron microscopy confirmed that the optimal mechanosynthesis regime (8 h, 750 rpm) ensures: synthesis of target phases B2-NiTi and B19 ′ -NiTi; minimal crystallite size ( ∼ 109 Å); high chemical homogeneity ( ∼ 46 at% Ni, ∼ 42 at% Ti, ∼ 10 at% Cu). Subsequent SPS at 850–900 ° C and 49.2 MPa allowed for the production of dense samples. Sintering at 90 0 ° C after mechanosynthesis at 750 rpm ensured the predominance of the stable B2 austenitic phase, high microstructural homogeneity, and minimal porosity, which is critical for the reversibility of martensitic transformations. EDS analysis confirmed the chemical homogeneity ( ∼ 46 at% Ni, ∼ 42 at% Ti, ∼ 10 at% Cu) and the uniform distribution of elements. The results demonstrate the effectiveness of combining mechanosynthesis at an increased rotation speed and reduced duration with SPS for the formation of microstructures optimized for the requirements of shape memory alloy (SMA) materials.

30 October 2025 in Crystals
Verified
Journal Article
Open access
PDF file
DADanagul Aubakirova
Danagul Aubakirova
ESElfira Sagymbekova
Elfira Sagymbekova
YKYernat Kozhakhmetov
Yernat Kozhakhmetov
YDYerkhat Dauletkhanov
Yerkhat Dauletkhanov
AUAzamat Urkunbay
Azamat Urkunbay
YTYERKEZHAN TABIYEVA
YERKEZHAN TABIYEVA
This study investigates the control of the phase-structural state in Ni–45Ti–xCu (x = 5, 7 at.%) shape memory alloys fabricated via a shortened powder metallurgy route: mechanical activation → spark plasma sintering (SPS) → heat treatment. Compact samples were produced from mechanically alloyed powders (650–750 rpm, up to 5 h) and sintered at 900 °C. The structure and microstructure were characterized using X-ray diffraction (to identify B2/B19′/Ni4Ti3 phases and assess ordering) and SEM–BSE/EDS (to analyze morphology, porosity, and Ni-rich precipitates). Two post-processing treatments were applied: single-stage annealing (500 °C, 2 h) and a three-stage treatment (900 °C/30 min → water quenching → 300 °C/20 min). Mechanical alloying transformed the initial elemental powder mixture (fcc-Ni, hcp-Ti, fcc-Cu) into a supersaturated fcc-(Ni, Cu, Ti) solid solution with emerging NiTi phases, with a minimum particle size achieved after ~300 min at 750 rpm. SPS compaction yielded a high-density matrix consisting predominantly of the B2 phase. Single-stage annealing preserved B19′ martensite and Ni4Ti3 precipitates, particularly in the 5 at.% Cu alloy. In contrast, the three-stage treatment dissolved the Ni4Ti3 precipitates, suppressed the formation of B19′ and R phases, and stabilized a highly ordered B2 matrix. Increasing the Cu content from 5 to 7 at.% significantly enhanced the B2 phase fraction, reduced secondary nickel-rich phases, and improved structural homogeneity, evidenced by a continuous neck network and closed porosity. The optimized condition—7 at.% Cu combined with the three-stage annealing—produced a microstructure with >95% B2 phase, <1% Ni4Ti3, and ~98% relative density. This forms the prerequisite microstructural state for a narrow transformation hysteresis and high functional cyclic stability.

21 January 2026 in Results in Surfaces and Interfaces
Verified
Journal Article
Open access
Kuat KombayevKuat Kombayev
Kuat Kombayev
YKYernat Kozhakhmetov
Yernat Kozhakhmetov
DYDias Yerbolat
Dias Yerbolat
YDYerkhat Dauletkhanov
Yerkhat Dauletkhanov
VKVadim Kim
Vadim Kim
Fuad KhoshnawFuad Khoshnaw
Fuad Khoshnaw

21 January 2026 in Crystals
Verified
Journal Article
Open access
PDF file
YTYERKEZHAN TABIYEVA
YERKEZHAN TABIYEVA
DYDias Yerbolat
Dias Yerbolat
SZSayat Zakerov
Sayat Zakerov
YDYerkhat Dauletkhanov
Yerkhat Dauletkhanov
AUAzamat Urkunbay
Azamat Urkunbay
NKNurgamit Kantay
Nurgamit Kantay
This work investigates the effect of titanium content and the duration of mechanical alloying on the structural and phase state of powder mixtures in the Ni–Al–Ti system. The initial mixtures of Ni68Al25Ti7, Ni72Al22Ti6, Ni70Al21Ti9, and Ni75Al25 were subjected to high-energy milling in a planetary ball mill for 1–6 h. It was found that the addition of titanium accelerates the dissolution of components and promotes the formation of a supersaturated fcc Ni(Al,Ti) solid solution. The most pronounced effects were observed for the Ni70Al21Ti9 composition, where after 6 h of alloying, the minimum crystallite size (11.3 nm) and maximum lattice strain (1.52%) were achieved. It is shown that titanium reduces the tendency for cold welding and promotes more uniform particle refinement. The optimal conditions for synthesizing a nanocrystalline solid solution with a homogeneous structure are a titanium content of 9 at.% and a mechanical alloying duration of 6 h. The resulting powders are promising for subsequent sintering and application in structural and heat-resistant intermetallic alloys and coatings.

24 February 2026 in Crystals
Verified
Journal Article
Open access
PDF file
NMNuriya Mukhamedova
Nuriya Mukhamedova
DYDias Yerbolat
Dias Yerbolat
SZSayat Zakerov
Sayat Zakerov
YDYerkhat Dauletkhanov
Yerkhat Dauletkhanov
AUAzamat Urkunbay
Azamat Urkunbay
GYGulnara Yerbolatova
Gulnara Yerbolatova
Boron nitride is considered a promising material for solid-state hydrogen storage due to its high thermal and chemical stability up to ~1000 °C, depending on the atmosphere, as well as its ability to form defect-rich structures with enhanced sorption activity. Despite the growing interest in modified BN systems, systematic studies on the effect of multicomponent modification induced by the addition of carbon, titanium, and aluminum on the structural and phase evolution of boron nitride during high-energy mechanical alloying remain limited to date. In this work, the structural-phase and morphological changes in boron nitride-based composites modified by the addition of carbon, titanium, and aluminum, synthesized by high-energy mechanical alloying, were investigated. The structural state and morphology of the materials were analyzed using X-ray diffraction, scanning electron microscopy, particle size analysis, and thermal analysis. It is shown that mechanical alloying leads to a progressive breakdown of the layered hexagonal BN structure and the formation of an amorphous-like, defect-rich state without the formation of new crystalline phases. The main stage of amorphization occurs within 30–60 min, after which structural disordering reaches saturation. Increasing the mechanical alloying time to 120 min does not result in significant changes in the phase state; however, it is accompanied by a reduction in agglomeration and the formation of a more homogeneous powder morphology, characterized by narrower particle size distributions, smoother particle surfaces, and more uniform spatial dispersion of components. It was established that the nature of the added component significantly influences the kinetics of structural transformations: carbon accelerates amorphization, titanium intensifies fragmentation and defect accumulation, whereas aluminum exhibits a stabilizing effect. In multicomponent BN–C–Ti–Al systems, a synergistic combination of these effects is observed, leading to the formation of metastable, partially amorphous structures. Based on a comprehensive analysis of structural and morphological data, the optimal mechanical alloying time was determined to be 120 min, providing a saturated amorphous-like structural state combined with improved microstructural homogeneity. The obtained defect-rich boron nitride structures can be considered a promising basis for further studies in the field of solid-state hydrogen storage.