The objective of this work is to simulate the superelasticity and shape-memory effect in a single-crystalline nickel-titanium (NiTi) alloy through a molecular dynamics (MD) study. Cooling and heating processes for this material are reproduced to investigate the temperature-induced phase transformation in its microstructure. It is found that the martensitic transformation and its reverse process occur accompanied by an abrupt volume change, and the transformed variants lead to the appearance of the (001) type compound twin. In addition, the transform temperatures for martensite start () and austenite finish () are determined, respectively. The results indicate that when the temperature is beyond during the compressive loading-unloading, the superelastic behavior becomes pronounced, which is attributed to the role of nanotwins on the transformation from the austenitic phase (B2) to martensitic phase (B19′). Compared to existing experimental data, a reasonable agreement is achieved through the modeling results, highlighting the importance of the compound twins for dominating the superelasticity of nanostructured NiTi alloys.
The objective of this study was to develop a micromechanical approach for determining the Mie–Grüneisen EOS parameters of iron under the Hugoniot states. The multiscale shock technique (MSST) coupled with molecular dynamics (MD) simulations was employed to describe the shocked Hugoniot relation of single-crystal (SC) and nanocrystalline (NC) iron under high pressures. The Mie–Grüneisen equation of state (EOS) parameters, the cold pressure (Pc), the cold energy (Ec), the Grüneisen coefficient (γ), and the melting temperature (Tm) are discussed. The error between SC and NC iron results was found to be less than 1.5%. Interestingly, the differences in Hugoniot state (PH) and the internal energy between SC and NC iron were insignificant, which shows that the effect of grain size (GS) under high pressures was not significant. The Pc and Ec of SC and NC iron calculated based on the Morse potential were almost the same with those calculated based on the Born–Mayer potential; however, those calculated based on the Born–Mayer potential were a little larger at high pressures. In addition, several empirical and theoretical models were compared for the calculation of γ and Tm. The Mie–Grüneisen EOSs were shown on the 3D contour space; the pressure obtained with the Hugoniot curves as the reference was larger than that obtained with the cold curves as the reference.
1 January 2016 in Advances in Materials Science and Engineering
The multiscale analysis method based on traction-separation law (TSL) and cohesive zone law was used to describe the cross-scale defective process of alpha titanium (α-Ti) material with compounding microdefects in this paper. First, the properties of T-S curve and the reasonable range of T-S area relative to the length of defects were discussed. Next, based on the conclusions above, the molecule dynamics analysis of three models ofα-Ti with compounding microdefects was conducted and cross-scaly simulated. The phenomenon, principles, and mechanisms of different compound microscale defects propagation ofα-Ti were observed and explained at atomic scale, and the effects of different microdefects on macrofracture parameters of materials were studied.
11 January 2024 in International Journal of Pressure Vessels and Piping