Sheng Ying

Prof. Sheng Ying

orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 January 2016 in Advances in Materials Science and Engineering
Verified
Journal Article
Open access
PDF file
SYSheng Ying
Sheng Ying
XZXiangguo Zeng
Xiangguo Zeng
The multiscale analysis method based on traction-separation law (TSL) and cohesive zone law was used to describe the cross-scale defective process of alpha titanium (α-Ti) material with compounding microdefects in this paper. First, the properties of T-S curve and the reasonable range of T-S area relative to the length of defects were discussed. Next, based on the conclusions above, the molecule dynamics analysis of three models ofα-Ti with compounding microdefects was conducted and cross-scaly simulated. The phenomenon, principles, and mechanisms of different compound microscale defects propagation ofα-Ti were observed and explained at atomic scale, and the effects of different microdefects on macrofracture parameters of materials were studied.

18 January 2023 in Buildings
Verified
Journal Article
Open access
PDF file
NLNai-xian LI
Nai-xian LI
BJBin Jia
Bin Jia
JCJunhong Chen
Junhong Chen
SYSheng Ying
Sheng Ying
SDSongwen Deng
Songwen Deng
Welding is the main method for oil/gas steel pipeline connection, and a large number of girth welds are a weak part of the pipeline. Under extremely complex loads, a steel pipeline undergoes significant plastic deformations and eventually leads to pipeline fracture. A damage mechanics model is a promising approach, capable of describing material fracture problems according to the stress states of the materials. In this study, an uncoupled fracture 2D model with a function of fracture strain and stress triaxiality, two uncoupled 3D fracture models, a consider the effect of Lode parameter stress-modified critical strain (LSMCS) model, and an extended Rice–Tracey (ERT) criterion were applied to X80 pipeline girth welds. Comprehensive experimental research was conducted on different notched specimens, covering a wide range of stress states, and the corresponding finite element models were established. A phenomenon-based hybrid numerical–experimental calibration method was also applied to determine the fracture parameter for these three models, and the stress triaxiality of the influence law of the tensile strength was analyzed. The results showed that the proposed fracture criterion could better characterize the ductile fracture behaviors of the girth welds of the X80 pipeline; however, the prediction accuracy of the 3D fracture model was higher than that of the 2D fracture model. The functional relationship between the tensile strength and stress triaxiality of the X80 pipeline girth welds satisfied the distribution form of the quadratic function and increased monotonically. The research results can be used to predict the fracture of X80 pipeline girth welds under various complex loads.

16 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
SYSheng Ying
Sheng Ying
ZYZhenchao Yang
Zhenchao Yang
YMYu Meng
Yu Meng
BJbin Jia
bin Jia
(1) Background: In most cases, passive isolation control methods are commonly used for the seismic isolation design in bridge engineering. However, passive seismic isolation devices, due to their non-adjustable performance parameters, struggle to achieve effective seismic isolation across a wide frequency range of 0 Hz to 20 Hz in response to random and varying seismic loads. (2) Methods: The sensitivity of the design parameters of the seismic isolation bearing was analyzed using the optimization center gradient method, and an improved genetic algorithm was employed to quickly optimize and obtain the optimal design parameters. (3) Results: The effectiveness of the three-dimensional seismic isolation bearing was validated through experiments. (4) Conclusions: The multi-factor sensitivity analysis approach used in this study for designing novel isolation bearings is applicable not only to seismic design in bridges but also serves as a reference for parameter design in isolation bearings requiring medium to high precision in seismic performance.

18 October 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NLNing Li
Ning Li
SYSheng Ying
Sheng Ying
WZWenjie Zheng
Wenjie Zheng
ZYZhenchao Yang
Zhenchao Yang
ZZZhonghai Zhang
Zhonghai Zhang
YLYanmei Li
Yanmei Li
A bridge hybrid isolation system, integrating both active and passive control strategies, is proposed and investigated to enhance seismic performance. The system is modeled as a two-layer structure, with the upper layer subjected to active control via a Proportional–Integral–Derivative (PID) controller, and the lower layer employing a conventional passive base isolation system. The displacement response of the superstructure is minimized by the control forces generated by the PID controller, which also accounts for the reaction forces transmitted to the lower isolation layer. To optimize the controller’s performance, a genetic algorithm is implemented for real-time tuning of the PID parameters. Numerical simulations, conducted using the Newmark method, are employed to assess the influence of active control on the lower isolation system. The results reveal that, while active control increases the peak displacement of the superstructure to some extent, it significantly prolongs the structural period, thus enhancing the system’s overall seismic resilience and stability.

18 September 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
SYSheng Ying
Sheng Ying
ZYZhenchao Yang
Zhenchao Yang
YMYu Meng
Yu Meng
BJbin Jia
bin Jia
(1) Background: In most cases, passive isolation control methods are commonly used for the seismic isolation design of bridge engineering. However, for passive seismic isolation devices, due to their non-adjustable performance parameters, it is challenging to achieve a good seismic isolation effect for structures under random and variable seismic loads in the wide frequency range of 0 Hz to 20 Hz; (2) Methods: the sensitivity of the design parameters of the seismic isolation bearing was analyzed using the optimization center gradient method, and an improved genetic algorithm was employed to quickly optimize and obtain the optimal design parameters; (3) Results: the effectiveness of the three-dimensional seismic isolation bearing was validated through experiments. (4) Conclusions: The multi-factor sensitivity analysis approach used in this study for designing novel isolation bearings is applicable not only to seismic design in bridges but also serves as a reference for parameter design in isolation bearings requiring medium to high precision in seismic performance.

26 March 2025 in Materials
Verified
Journal Article
Open access
PDF file
ZYZhenchao Yang
Zhenchao Yang
BJbin Jia
bin Jia
SYSheng Ying
Sheng Ying
XLXiao Liu
Xiao Liu
YZYu Zeng
Yu Zeng
Glass fiber-reinforced polymer (GFRP) connecting joints are difficult in the design of structural components and also critical areas prone to damage. In this study, based on the existing research, a combination of experimental and finite element analysis is used to systematically analyze the performance-influencing factors of the hybrid connection of glass fiber-reinforced composite plate and steel plate adhesive bolts under tension. By discussing the damage modes, load–displacement curves, and strain distributions at the GFRP connection joints, the influence of the connection methods and bolt quantities on the tensile properties of double-lap joints comprising GFRP plates and steel plates is revealed, and a loss evolution model for GFRP composite plates is established based on the Hashin failure criterion. The results show that the adhesive–bolted connection integrates the advantages of both adhesive bonding and bolted connections, significantly improving the tensile performance of the joint. Furthermore, the vertical arrangement of two bolts is superior to the horizontal arrangement under double-bolt connection conditions between GFRP plates and steel plates. For the several design options proposed in this study, the GFRP joints exhibit the optimal tensile properties among the four bolt arrangement schemes.