Wojciech Prokopowicz

Dr. Wojciech Prokopowicz

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2025 in Energies
Verified
Journal Article
Open access
PDF file
ŁBŁukasz Brodzik
Łukasz Brodzik
WPWojciech Prokopowicz
Wojciech Prokopowicz
Bartosz CiupekBartosz Ciupek
Bartosz Ciupek
AFAndrzej Frąckowiak
Andrzej Frąckowiak
Adverse climate change has forced a deeper reflection on the scale of pollution related to human activity, including in the aviation industry. As a result, fundamental questions have arisen about the characteristics of these pollutants, the mechanisms of their formation and potential strategies for reducing them. This paper provides a comprehensive overview of key technical solutions to minimize the environmental impact of aircraft engines. The solutions presented range from fuel innovations to advanced design changes and drive concepts. Particular attention was paid to sustainable aviation fuels (SAFs), which are currently an important element of the environmental strategy regulated by the European Union. It also discusses the potential use of hydrogen as a potential alternative fuel to replace traditional aviation fuels in the long term. The analysis in the article made it possible to characterize in detail possible modifications in the functioning of aircraft engines, based both on the current state of technical knowledge and on the anticipated directions of its development, which has not been a frequent issue in comprehensive research so far. The analysis shows that the type of raw material used to create SAF has a strong impact on its physical and chemical parameters and the degree of greenhouse gas emissions. This necessitates a broader analysis of the legitimacy of using a given type of fuel from the SAF group in the direction of selected air operations and areas with a higher risk of severe atmospheric pollution. These results provide the basis for further research into sustainable solutions in the aviation sector that can contribute to significantly reducing its impact on climate change.

1 March 2024 in Journal of Ecological Engineering
Verified
Journal Article
Open access
Bartosz CiupekBartosz Ciupek
Bartosz Ciupek
ŁBŁukasz Brodzik
Łukasz Brodzik
ŁSŁUKASZ SEMKŁO
ŁUKASZ SEMKŁO
WPWojciech Prokopowicz
Wojciech Prokopowicz
PSPiotr W. Sielicki
Piotr W. Sielicki
The aim of the research was to determine the possibility of co-combustion of conventional aviation fuel (JET A-1 jet fuel) with hydrogen (H2). The tested miniature turbojet engine was adapted to co-combust of both fuels. The results obtained from the research provide a positive premise for the...

31 March 2023 in Journal of Konbin
Verified
Journal Article
Closed access
WPWojciech Prokopowicz
Wojciech Prokopowicz
AFAndrzej Frąckowiak
Andrzej Frąckowiak
The solution proposed in this article, based on direct injection of hydrogen into the combustion chamber, offers many benefits, including a better volumetric efficiency, complete combustion (avoidance of premature ignition and backfire) and significant benefits in terms of power density when compared to engines, in which hydrogen is injected into the air inlet duct. The article discusses advantages and disadvantages of systems responsible for injecting hydrogen into the combustion chamber based on the operational phases of the GTM 400 engine developed by the JET-POL Company. The use of an electronic controller combined with an injector placed in an appropriate place inside the combustion chamber allow for the mentioned engine to be modified this way to optimize its power, performance and emissions. The article discusses matters related to challenges faced by materials used to make components of hydrogen injectors as well as research on the topic in question with the use of diesel engines. The article considers the impact of a low mass density and hydrogen energy, high speed of sound and low thickness on the injection system and components of a miniature turbojet engine. Physical attributes shaped by hydrogen fuel directly affect the size of components, selection of materials and tribology of turbojet engines. The authors suggest that the solutions used in the research on the GTM 400 engine can be used in the future to build hydrogen systems (hydrogen injection, storage and distribution) for fullscale passenger aircraft jet engines.

25 December 2024 in Energies
Verified
Journal Article
Open access
PDF file
BCBartłomiej Cywka
Bartłomiej Cywka
WPWojciech Prokopowicz
Wojciech Prokopowicz
Bartosz CiupekBartosz Ciupek
Bartosz Ciupek
Grzegorz Marek SzymańskiGrzegorz Marek Szymański
Grzegorz Marek Szymański
DMDaniel Mokrzan
Daniel Mokrzan
AFAndrzej Frąckowiak
Andrzej Frąckowiak
Turbine engines are currently one of the most important and expensive aircraft components. Both for economic and safety reasons, high engine reliability is required. Therefore, sophisticated methods are needed to determine their current condition. Diagnostics of turbine engines allow for the detection of faults before they lead to damage. The article presents methods and results of vibroacoustic diagnostics of a miniature GTM400 jet engine adapted to kerosene and hydrogen fuel supply. During thermal and vibroacoustic tests of engine parameters powered by hydrogen fuel supply, the engine seized up in the initial start-up phase due to improper control and rapid thermal changes in the gas line. The cause of the undesirable technical condition of the engine was a significantly higher temperature of gases (exhaust gases) affecting the working elements of the engine (turbine shaft, rotor, and blades), which consequently led to engine damage. This phenomenon and the results obtained from the unexpected technical condition constitute a valuable premise for considering the issue of proper operation of the turbojet engine during fuel changes, especially following current trends related to the decarbonization of the aviation sector. The obtained research results and the resulting observations and conclusions make it necessary to perform technical analyses and pre-implementation tests each time before allowing the use of a conventional engine if it undergoes the process of reconstruction in terms of using a new fuel (especially if its technical parameters are different from the originally used one). The presented method of conducting tests allows for a detailed determination of the causes of damage to the cooperating elements of the engine structure under the influence of changes in operating parameters.

5 March 2026 in Acta Mechanica et Automatica
Verified
Journal Article
Open access
PDF file
Bartosz CiupekBartosz Ciupek
Bartosz Ciupek
Ireneusz BaumaIreneusz Bauma
Ireneusz Bauma
ATAlexander Tarasov
Alexander Tarasov
AFAndrzej Frąckowiak
Andrzej Frąckowiak
ŁBŁukasz Brodzik
Łukasz Brodzik
WPWojciech Prokopowicz
Wojciech Prokopowicz
This study presents the design, thermodynamic analysis, and experimental validation of a condensing economizer dedicated to bi-omass-fired heating boilers. The proposed device incorporates a centrally arranged flue-gas distribution chamber and a water-cooled tube bundle that enables recovery of both sensible heat and the latent heat released during water-vapor condensation. The economizer, protected under Patent No. PL247342B1 was evaluated through analytical modelling and laboratory testing per-formed on pellet boilers with rated outputs of 25–100 kW. The heat-transfer model, which couples convective and condensation mechanisms, demonstrated that the presence of water vapor in the flue gas significantly increases the effective heat transfer coef-ficient, thereby enhancing the overall energy recovery potential. Prototype units with heat-exchange surfaces ranging from 0.63 to 2.90 m2 achieved thermal outputs between 1.8 and 7.8 kW, with stable condensation occurring when the boiler’s return-supply temperature difference was maintained at ΔT ≥ 25 °C. Experimental results confirmed a substantial reduction in flue-gas tempera-ture (down to 59 °C at nominal load and 34 °C at reduced load), which translated into an increase in gross boiler efficiency to 107% and 119%, respectively. All emission indicators complied with the Ecodesign Directive (EU) 2015/1189, while seasonal effi-ciency analysis yielded an Energy Efficiency Index of 167.8 (A+++). The findings demonstrate that the integrated counterflow–crossflow economizer significantly improves waste-heat recovery, reduces fuel consumption, and lowers particulate and gaseous emissions. Owing to its modular construction and corrosion-resistant design, the system is suitable for practical implementation in modern biomass heating installations.

11 September 2025 in Energies
Verified
Journal Article
Open access
PDF file
WPWojciech Prokopowicz
Wojciech Prokopowicz
Bartosz CiupekBartosz Ciupek
Bartosz Ciupek
AMArtur Maciag
Artur Maciag
Tomasz GajewskiTomasz Gajewski
Tomasz Gajewski
PSPiotr W. Sielicki
Piotr W. Sielicki
This study presents an advanced diagnostic methodology for assessing mechanical faults in high-performance jet engines using non-contact laser vibrometry and Fourier-based vi-bration analysis. Focusing on Pratt & Whitney F100-PW-229 engines used in F-16 aircraft, thise research identifies critical measurement locations, including the gearbox, turbine, and compressor supports. High-resolution vibration signals were collected under test bench conditions and processed using fFast Fourier tTransform (FFT) techniques to extract frequency-domain features indicative of rotor imbalances, bearing wear, and structural anomalies. Comparative analysis between nominal and degraded engines confirmed strong correlations between analytical predictions and empirical spectral patterns. Thise study introduces a signal processing framework combining time–frequency analysis with Relief-F-based feature selection, laying the groundwork for future integration with ma-chine learning algorithms. This non-intrusive, efficient diagnostic method supports early fault detection, enhances engine availability, and contributes to the development of a na-tional vibration reference database, especially vital in the absence of OEM-supplied tools.