ABDELKADER BOUGARA

Prof. ABDELKADER BOUGARA

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 January 2022 in Journal of Structural Fire Engineering
Verified
Journal Article
Closed access
AFAbdelkadir Fellouh
Abdelkadir Fellouh
ABABDELKADER BOUGARA
ABDELKADER BOUGARA
PPPaulo A.G. Piloto
Paulo A.G. Piloto
NBNourredine Benlakehal
Nourredine Benlakehal
Purpose: Investigate the fire performance of eccentrically loaded concrete partially encased column (PEC), using the advanced calculation method (ANSYS 18.2, 2017) and the simple calculation method in Annex G of Eurocode 4 (EN 1994-1-2, 2005). This work examines the influence of a range of parameters on fire behaviour of the composite column including: eccentricity loading, slenderness, reinforcement, fire rating and fire scenario. In this study, ISO-834 (ISO834-1, 1999) was used as fire source.Design/methodology/approach: Currently, different methods of analysis used to assess the thermal behaviour of composite column exposed to fire. Analytical method named simplified calculation methods defined in European standard and numerical simulations named advanced calculation models are treated in this paper.Findings: The load-bearing capacity of the composite column becomes very weak in the presence of the fire accident and eccentric loading, this recommends to avoid as much as possible eccentric loading during the design of construction building. The reinforcement has a slight influence on the temperature evolution; moreover, the reinforcement has a great contribution on the load capacity, especially in combined compression and bending. When only the two concrete sides are exposed to fire, the partially encased composite column presents a high load-bearing capacity value.Originality/value: The use of a three-dimensional numerical model (ANSYS) allowed to describe easily the thermal behaviour of PEC columns under eccentric loading with the regard to the analytical method, which is based on three complex steps. In this study, the presence of the load eccentricity has found to have more effect on the load-bearing capacity than the slenderness of the composite column. Introducing a load eccentricity on the top of the column may have the same a reducing effect on the load-bearing capacity as the fire.

18 August 2025 in Sustainability
Verified
Journal Article
Open access
PDF file
SBSaid Beldjilali
Said Beldjilali
Antonella SarcinellaAntonella Sarcinella
Antonella Sarcinella
MOMohamed Amine Ouared
Mohamed Amine Ouared
ABABDELKADER BOUGARA
ABDELKADER BOUGARA
NNNaciri Naciri
Naciri Naciri
Rodica-Mariana IonRodica-Mariana Ion
Rodica-Mariana Ion
Replacing virgin raw materials with recycled waste in construction products is a key strategy for advancing sustainable development. This study explores the partial substitution of commercial gypsum with powdered waste brick (WB) in gypsum mortars, assessing its impact on mechanical performance, water absorption, and environmental footprint. Mortars were prepared with 0%, 5%, 10%, 20%, and 30% WB by weight. Results indicate that a 20% replacement level enhances flexural strength by 56% and compressive strength by 33% at 28 days, compared to the reference mix. SEM and XRD analyses revealed no formation of new crystalline phases, suggesting that the performance improvement is primarily due to physical interactions and microstructural effects. However, at 30% WB, a significant reduction in adhesion strength was observed, falling below the typical threshold for gypsum-based coatings, which may constrain practical application at higher replacement levels. Environmental assessment showed that both CO2 emissions and energy consumption decreased by up to 20% with a 30% substitution. A 20% WB content is therefore proposed as the optimal compromise between mechanical performance and environmental benefit. This approach supports circular economy principles by promoting the reuse of ceramic construction waste in the development of new sustainable materials.

7 January 2026 in Processes
Verified
Journal Article
Open access
PDF file
MOMohamed Amine Ouared
Mohamed Amine Ouared
ABABDELKADER BOUGARA
ABDELKADER BOUGARA
IYI. Yurtdas
I. Yurtdas
Rodica-Mariana IonRodica-Mariana Ion
Rodica-Mariana Ion
SBSaid Beldjilali
Said Beldjilali
Nordine LeklouNordine Leklou
Nordine Leklou
Gypsum has been used as a building material for a long time due to its environmental friendliness, exceptional fire performance, and ease of use. However, it is also known to have poor moisture resistance and lower mechanical performance. Construction and demolition wastes, which can cause many environmental issues if not properly managed, are increasingly recycled as reinforcement materials in gypsum mortar. This study aims to assess the effect of incorporating fine glass waste aggregates into gypsum mortars on their physical, mechanical, and adhesive properties. The effect of replacing sand from 0% to 100% by glass waste in gypsum mortar was investigated using various tests and analyses including scanning electron microscopy (SEM), X-ray diffraction (XRD), thermal analysis (DTA and TGA), setting time, flexural and compressive strengths, adhesive, surface hardness, water absorption, thermal conductivity, and ultrasonic pulse velocity. The results obtained emphasize that glass waste can substitute sand in gypsum mortar, even when used at high replacement levels. Replacing all the sand in mortar with glass waste results in a 11% increase in porosity, a 9% decrease in density, and a 53% decrease in thermal conductivity, while still maintaining acceptable mechanical performances. The adhesive strength shows a great dependence on the nature of the substrate.

17 June 2025 in Mechanics Based Design of Structures and Machines
Verified
Journal Article
Closed access
ALAbdennour Lakhal
Abdennour Lakhal
ABABDELKADER BOUGARA
ABDELKADER BOUGARA
NBNoureddine Benlakehal
Noureddine Benlakehal