BiFeO3-based materials have attracted considerable attention owing to their room-temperature multiferroic properties and ultrahigh ferroelectric polarization. In this study, La and Co co-doped BiFeO3 (BLFCO) thin films were fabricated on Pt (111)/Ti/SiO2/Si substrate buffered by Nb-doped (0.7 wt.%) SrTiO3 via pulsed laser deposition. Experiments revealed that the film deposited at 0.2 Pa comprised the predominant orientation of BiFeO3 (BFO) (111), and its surface root-mean-square roughness was 0.96 nm. The saturation magnetization of the film reached 25.3 emu cm3, which was an order of magnitude higher than that of the pure BFO film, as well as the remanent magnetization reached 1.8 emu cm−3. The result was attributed to the predominant orientation and small grain size of BLFCO films. The piezo-response force microscopy measurements revealed the co-doped film possesses well repeatable performance of polarization reversal, and the presence of ferroelectric orders with an asymmetric ‘butterfly’ structure. These results are helpful for further improving the performance of BFO multifunctional devices.
A series of heavily Fe-doped LiNbO3 (LN:Fe) crystals were grown via the Czochralski method. The dark- and photo-conductivity of the 5.0 wt.% Fe-doped LiNbO3 crystal reached 3.30 × 10−8 Ω−1 cm−1 and 1.46 × 10−7 Ω−1 cm−1 at 473 nm, which are about 7 and 5 orders of magnitude higher than that of congruent LiNbO3, respectively. Then, a p-n heterojunction was fabricated by depositing the heavily Fe-doped LiNbO3 on a p-type Si substrate using the pulsed laser deposition. The current–voltage curve of the LN:Fe/Si heterojunction presents a well-defined behavior with a turn-on voltage of 2.9 V. This LN:Fe/Si heterojunction gives an excellent prototype device for integrated optics and electro-photonics.
Lithium niobate (LiNbO3, LN) is a multifunctional material with broad applicability in photonic and electronic devices. Recent advances in lithium niobate on insulator (LNOI) technology have significantly enhanced the integration density and miniaturization potential of LN-based platforms. Among the various fabrication techniques available, pulsed laser deposition (PLD) presents a cost-effective and versatile alternative to crystalline ion slicing (CIS), particularly advantageous for achieving high doping concentrations. However, a persistent challenge in PLD-grown lithium niobate film is cracking, primarily induced by the substantial thermal stress resulting from the mismatch in thermal expansion coefficients between LN and the substrate. In this study, we implemented a series of process modifications to address the cracking issue and successfully achieved crack-free LN films by introducing a lithium-deficient phase. This approach enabled the successful fabrication of highly Fe3+-doped LN films with a high electrical conductivity of 9.95 × 10−5 S/m while also exhibiting characteristic polarization switching behavior. These results demonstrate that PLD enables the fabrication of highly doped, structurally robust LN films and holds significant potential for the development of advanced electronic and optoelectronic devices.