Dynamic vision sensors (DVS) represent a promising new technology, offering low power consumption, sparse output, high temporal resolution, and wide dynamic range. These features make DVS attractive for new research areas including scientific and space-based applications; however, more precise understanding of how sensor input maps to output under real-world constraints is needed. Often, metrics used to characterize DVS report baseline performance by measuring observable limits but fail to characterize the physical processes at the root of those limits. To address this limitation, we describe step-by-step procedures to measure three important performance parameters: (1) temporal contrast threshold, (2) cutoff frequency, and (3) refractory period. Each procedure draws inspiration from previous work, but links measurements sequentially to infer physical phenomena at the root of measured behavior. Results are reported over a range of brightness levels and user-defined biases. The threshold measurement technique is validated with test-pixel node voltages, and a first-order low-pass approximation of photoreceptor response is shown to predict event cutoff temporal frequency to within 9% accuracy. The proposed method generates lab-measured parameters compatible with the event camera simulator v2e, allowing more accurate generation of synthetic datasets for innovative applications.
Event-based sensors (EBS) differ from traditional imaging systems in that each pixel contains electronics that allow for asynchronous operation. They feature several advantages over their traditional frame-based counterparts, including lower power requirements and lower data volumes, wider dynamic ranges, and shorter latency periods.1 These features make EBS very attractive for space-based observations of high-speed phenomena. To date, the fastest space-based imagers are those used for lightning observations on the GOES Global Lightning Mapper.2
Forthcoming infrared event-based sensors will have utility in the space-based surveillance domain where they could potentially perform traditional sensing and tracking functions with significantly enhanced temporal resolution and reduced downstream datalink demands and power consumption. As a first step toward extending event-based sensing technology into the mid-wave infrared, a DC simulation of the conventional event-based sensor unit cell's photoreceptor circuit is performed, and the results are compared with measurements of a printed circuit board implementation of the same circuit to assess what design freedom is available to interface the photoreceptor with a mid-wave infrared photodetector. Detailed analysis of the circuit and measurements provides insight into which fundamental properties of the transistors drive the photoreceptor's dynamic range and demonstrates several characteristics that are relevant to mid-wave infrared sensing. These characteristics include the capability to produce a stable, low voltage bias on the infrared photodetector to maximize sensitivity, and that operating the circuit below room temperature increases the photoreceptor's dynamic range. Measurements show that even the simplest implementation of the photoreceptor circuit exhibits a dynamic range of logarithmic compression of 150 dB at room temperature. However, the dynamic range is ultimately limited by the mid-wave infrared photodetector's dark current activation energy, which is significantly lower than the threshold voltage (energy) of the photoreceptor's feedback transistor and, thus, there is an incentive for the photodetector's dark current to be diffusion-limited.
Event-based vision sensors (EVSs), often referred to as neuromorphic cameras, operate by responding to changes in brightness on a pixel-by-pixel basis. In contrast, traditional framing cameras employ some fixed sampling interval where integrated intensity is read off the entire focal plane at once. Similar to traditional cameras, EVSs can suffer loss of sensitivity through scenes with high intensity and dynamic clutter, reducing the ability to see points of interest through traditional event processing means. This paper describes a method to reduce the negative impacts of these types of EVS clutter and enable more robust target detection through the use of individual pixel frequency analysis, background suppression, and statistical filtering. Additionally, issues found in normal frequency analysis such as phase differences between sources, aliasing, and spectral leakage are less relevant in this method. The statistical filtering simply determines what pixels have significant frequency content after the background suppression instead of focusing on the actual frequencies in the scene. Initial testing on simulated data demonstrates a proof of concept for this method, which reduces artificial scene noise and enables improved target detection.
4 September 2025 in The Journal of the Astronautical Sciences
Building off the foundation of a physics-based end-to-end model for event-based vision sensors (EVS) observing resident space objects (RSOs), we apply new techniques to model realistic low-light sensor noise. While previous approaches simulate memorized current leakage and apply temporal noise models, our methods improve on these approaches and additionally account for current-following noise as an event source. These improvements are key components for accurate event-generating simulators which can advise requirements and concepts of operations for dedicated event-based Space Domain Awareness (SDA) architectures. The EVS pixel’s independent and asynchronous recording of changes in photocurrent produces data with high temporal resolution and dynamic range making it an attractive technology for SDA. EVS are particularly appealing as a space-based payload because of their sparse data output reducing the need for downlink, computational, and power resources. However, truth data is limited for space-based architectures. Therefore, simulation of the underlying physics is particularly important. Our physics-based end-to-end model now includes noise based on induced photocurrent to generate simulated events closer to known truth. We introduce a new Poisson-based method to model the noise generated by the temporal variation of the dark current and a method to tune high-frequency white noise on the induced photocurrent to model the noise on signals above the dark current. These techniques demonstrably improve EVS noise modeling by closely matching observed event rate and polarity behavior, moving EVS one step closer to operational space-based SDA usage.
We present the first study into the long-term effects of radiation on an Event-based Vision Sensor (EVS) using real-world data from orbit. Falcon Neuro is an experimental, first-of-its-kind payload attached to the exterior of the International Space Station (ISS) operating two DAVIS 240C Event-based Vision Sensors. This study considers data gathered by Falcon Neuro between January 2022 and September 2024 over a wide range of scenes from Earth-facing and space-facing sensors. Falcon Neuro contains the first working EVS system in orbit. While EVS radiation degradation has been studied on the ground, this is the first study of degradation for EVS cameras of any kind in a real, uncontrolled environment. EVS pixel circuits are unique, analog, and far more complex than CMOS or CCD cameras. By utilizing distinct and unique features in the data created by the different pixel circuits in the camera, we show that degradation effects over the life of the mission caused by radiation or other sources have been minimal, with only one of the 18 measures displaying a convincing deterioration trend. Ultimately, we demonstrate that DAVIS 240C Event-based Vision Sensors have a high aptitude for surviving long-term space flight.