The recovery of livestock waste through multistage anaerobic digestion represents a key strategy for producing high-efficiency liquid biofertilizers within circular economy frameworks. This study compared two underexplored substrates—guinea pig manure and vermicompost leachate (VL)—processed in series biodigesters to evaluate their nutrient composition and agronomic performance. The guinea pig manure biol exhibited higher macronutrient concentrations (N = 1.09–3.74 g L−1; P = 0.06–0.64 g L−1; K = 1.85–3.20 g L−1) and electrical conductivity (14.1–26.5 mS cm−1), while VL presented a more balanced nutrient profile (N = 0.65–0.71 g L−1; P = 0.04–0.09 g L−1; K = 2.46–3.76 g L−1) and slightly lower salinity (15.0–17.2 mS cm−1). Micronutrient levels (Fe, Mn, Zn, B) exceeded the reference thresholds established by EU Regulation 2019/1009 for liquid fertilizers, suggesting the need for dilution prior to field application. In maize field trials, VL diluted 1:7 increased above-ground biomass by 28%, and guinea pig biol diluted 1:10 achieved a 22% increase compared to the control, confirming their biostimulant potential. However, the high sodium content (848–1024 mg L−1) may limit application on saline or poorly drained soils, requiring adaptive agronomic management. These findings demonstrate that multistage anaerobic digestion effectively transforms unconventional organic waste into nutrient-rich biofertilizers, expanding the scientific foundation for alternative substrates and reinforcing their potential to enhance Andean smallholder agriculture, nutrient recycling, and food security within a sustainability-oriented bioeconomy.
The energy recovery of biomass is frequently implemented through single-output systems or passive management schemes, resulting in underutilization of its thermodynamic potential and losses in economic value, climate benefits, and useful co-products. This study formalizes the concept of biopolygeneration as a diagnostic principle aimed at maximizing biomass utilization through the simultaneous production of multiple energy services and the valorization of secondary streams. A dimensionless metric, the Biopolygeneration Diagnostic Index (BDI), is proposed to quantify this concept. The index is bounded within and integrates five sub-indices: energy efficiency (), thermal integration (), energy self-sufficiency (), exergetic quality of outputs (), and co-product valorization (). Weights were determined using the Analytic Hierarchy Process (, , , ; ). The BDI was evaluated using six cases, including five operating plants and one validated computational model representing five biomass conversion technologies in four countries. Results ranged from 0.453 for an engine without combined heat and power (CHP) to 0.733 for a cascade trigeneration system. Under identical feed conditions, the incorporation of CHP () increased the BDI from 0.453 to 0.715, representing a 57.7% improvement attributable solely to heat recovery. Current limitations include the small validation sample () and the reconstruction of and from technological characteristics due to the absence of standardized reporting in the literature. Although these sub-indices account for only 22% of the total weighting (), the present results should be considered a proof of concept rather than a fully empirical validation. The BDI provides a thermodynamically consistent framework for comparing bioenergy systems across technologies and supports technical, regulatory, and investment decision making. Broader validation using larger measurement-based datasets is required before claims of universality can be established.