Immobilization of photocatalysts in porous materials is an approach to significantly minimize the hazards of manipulation and recovery of nanoparticles. Inorganic materials, such as zeolites, are proposed as promising materials for photocatalyst immobilization mainly due to their photochemical stability. In this work, a green synthesis method is proposed to combine TiO₂-based photocatalysts with commercial ZY zeolite. Moreover, a preliminary analysis of their performance as photocatalysts for the abatement of organic pollutants in waters was performed. Our results show that the physical mixture of TiO₂ and zeolite maintains photocatalytic activity. Meanwhile, composites fabricated by doping TiO₂–zeolite Y materials with silver and palladium nanoparticles do not contribute to improving the photocatalytic activity beyond that of TiO₂.

Ethanol is a promising biofuel that can replace fossil fuel, mitigate greenhouse gas (GHG) emissions, and represent a renewable building block for biochemical production. Ethanol can be produced from various feedstocks. First-generation ethanol is mainly produced from sugar- and starch-containing feedstocks. For second-generation ethanol, lignocellulosic biomass is used as a feedstock. Typically, ethanol production contains four major steps, including the conversion of feedstock, fermentation, ethanol recovery, and ethanol storage. Each feedstock requires different procedures for its conversion to fermentable sugar. Lignocellulosic biomass requires extra pretreatment compared to sugar and starch feedstocks to disrupt the structure and improve enzymatic hydrolysis efficiency. Many pretreatment methods are available such as physical, chemical, physicochemical, and biological methods. However, the greatest concern regarding the pretreatment process is inhibitor formation, which might retard enzymatic hydrolysis and fermentation. The main inhibitors are furan derivatives, aromatic compounds, and organic acids. Actions to minimize the effects of inhibitors, detoxification, changing fermentation strategies, and metabolic engineering can subsequently be conducted. In addition to the inhibitors from pretreatment, chemicals used during the pretreatment and fermentation of byproducts may remain in the final product if they are not removed by ethanol distillation and dehydration. Maintaining the quality of ethanol during storage is another concerning issue. Initial impurities of ethanol being stored and its nature, including hygroscopic, high oxygen and carbon dioxide solubility, influence chemical reactions during the storage period and change ethanol’s characteristics (e.g., water content, ethanol content, acidity, pH, and electrical conductivity). During ethanol storage periods, nitrogen blanketing and corrosion inhibitors can be applied to reduce the quality degradation rate, the selection of which depends on several factors, such as cost and storage duration. This review article sheds light on the techniques of control used in ethanol fuel production, and also includes specific guidelines to control ethanol quality during production and the storage period in order to preserve ethanol production from first-generation to second-generation feedstock. Finally, the understanding of impurity/inhibitor formation and controlled strategies is crucial. These need to be considered when driving higher ethanol blending mandates in the short term, utilizing ethanol as a renewable building block for chemicals, or adopting ethanol as a hydrogen carrier for the long-term future, as has been recommended.

Ethanol is considered as a renewable transport fuels and demand is expected to grow. In this work, trends related to bio-ethanol production are described using Thailand as an example. Developments on high-temperature fermentation and membrane technologies are also explained. This study focuses on the application of membranes in ethanol recovery after fermentation. A preliminary simulation was performed to compare different process configurations to concentrate 10 wt% ethanol to 99.5 wt% using membranes. In addition to the significant energy reduction achieved by replacing azeotropic distillation with membrane dehydration, employing ethanol-selective membranes can further reduce energy demand. Silicalite membrane is a type of membrane showing one of the highest ethanol-selective permeation performances reported today. A silicalite membrane was applied to separate a bio-ethanol solution produced via high-temperature fermentation followed by a single distillation. The influence of contaminants in the bio-ethanol on the membrane properties and required further developments are also discussed.

Food waste (FW) utilized as substrate for anaerobic digestion (AD) to produce biogas is promising. Simultaneously, waste is handled and value-added products such as biogas and fertilizer are produced. Palm oil mill effluent (POME) is used as the co-substrate. This study aims to simulate the complete process flow of anaerobic co-digestion (AcoD), consisting of pre-treatment of feedstock, biogas upgrading, wastewater treatment and sludge dying using SuperPro Designer. Parameters, namely hydraulic retention time (HRT), recycle ratio of sludge, water to FW ratio (kg/kg) and co-substrate to FW ratio (kg/kg), would affect the performance of digester. The optimization of these parameters is performed using Design-Expert software, involving response surface methodology (RSM). The effects on responses such as methane flow, chemical oxygen demand (COD) and volatile solid (VS) removal efficiencies are analyzed. In treating 25,000 kg/h of feed, the optimized values for HRT, recycle ratio, water to feedstock ratio, POME to FW ratio are 37.2 days, 0.381, 0.027 and 0.004, respectively. The methane yield is 0.30 L CH₄/g of COD removed, with COD and VS removal efficiencies of 81.5% and 68.9%, respectively. The project is profitable, with a payback period of 6.14 years and net present value (NPV) of $5,680,000. A comprehensive understanding of AD matures it for commercialization purposes.