Michal Žitňan

Dr. Michal Žitňan


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2021 in International Journal of Applied Glass Science
Verified
Journal Article
Open access
PDF file
MŽMichal Žitňan
Michal Žitňan
LMLenka Müller
Lenka Müller
KZKarina Zub
Karina Zub
USUlrich S. Schubert
Ulrich S. Schubert
Dušan GalusekDušan Galusek
Dušan Galusek
Lothar WondraczekLothar Wondraczek
Lothar Wondraczek
A commodity inkjet printer was modified to print layered ceramic structures on stiff glass substrates, using inks in the form of sols with mullite stoichiometry. The sol composition was optimized in terms of ink viscosity, surface tension, and evaporation properties. The ink was then fed into a multi‐nozzle commodity printer head and deposited by ink‐jetting. Thin lines without bulges with a thickness of ∼1.8 μm with concave profile and a line width of ∼100 μm were successfully printed on fused silica substrates. The presence of mullite was confirmed by Raman spectroscopy and XRD after sintering of printed structures.

25 November 2024 in RSC Advances
Verified
Journal Article
Open access
PDF file
MGM. González-Rodríguez
M. González-Rodríguez
SDS. Díaz-Coello
S. Díaz-Coello
SDSelene Díaz-González
Selene Díaz-González
VRV. D. Rodríguez
V. D. Rodríguez
MŽMichal Žitňan
Michal Žitňan
PNPedro Nunez
Pedro Nunez
Zn1−xCdxS was prepared by a new green and simple method. The best catalyst Zn0.7Cd0.3S produced 29.5 mmol h−1 gcat−1 of hydrogen under visible light and 795.4 mmol h−1 gcat−1 under UV light.

16 June 2021 in International Journal of Applied Glass Science
Verified
Journal Article
Open access
PDF file
PTPeijing Tian
Peijing Tian
LMLenka Müller
Lenka Müller
MŽMichal Žitňan
Michal Žitňan
RSRoman Sajzew
Roman Sajzew
Lothar WondraczekLothar Wondraczek
Lothar Wondraczek
Bottom-up synthesis of alumina suspensions doped with trivalent (Eu3+) or monovalent (K+) ions is reported as a means to generate crystalline transition-phase alumina with increased thermal stability. Dynamic light scattering was used to track the stability of precursor sols, showing how the dissolved cations contribute to the stabilizing double layer and particle separation in the liquid phase. The incorporation of alkali or rare-earth dopants into the alumina structure further influences the thermal conversion and crystallization behavior. The Kissinger activation energy of the θ→α phase transition in Al2O3 indicates an inhibitory effect of Eu3+ and K+ on the formation of the stable α phase, also confirmed by X-ray diffraction. The intensity ratio of the 7F2/7F1 characteristic photoemission bands of Eu3+ was used to probe the local symmetry as a function of calcination temperature to further corroborate this observation.

13 October 2025 in Materials
Verified
Journal Article
Open access
PDF file
DKDaniel Kottfer
Daniel Kottfer
Karol KyziolKarol Kyziol
Karol Kyziol
MKMaria Kanuchova
Maria Kanuchova
MKMarta Kianicová
Marta Kianicová
MŽMichal Žitňan
Michal Žitňan
PKPatrik Klučiar
Patrik Klučiar
This study examines the impact of varying pulse conditions on the properties of titanium diboride (TiB2) coatings deposited by high-power impulse magnetron sputtering (HiPIMS). The coatings were prepared on steel substrates using an industrial-scale system. During the experiments, the HiPIMS frequency and pulse width were systematically varied to examine their influence on the coating’s microstructural, mechanical, and tribological properties. The obtained results show a correlation between process parameters and coating performance. A maximum hardness of 39.7 GPa and a coefficient of friction (CoF) as low as 0.68 were achieved. The best combination of mechanical properties was observed for coatings prepared in a frequency range of 600–1000 Hz and with a pulse width of 50 µs. Notably, the optimal tribological properties and surface roughness were obtained at 800 Hz and a 50 µs pulse width. This work demonstrates that fine-tuning HiPIMS pulse conditions is crucial for achieving high-quality TiB2 coatings with enhanced functional performance.

19 August 2026 in Microstructures
Verified
Journal Article
Open access
PDF file
MIMuhammad Umer Iqbal
Muhammad Umer Iqbal
Surjyakanta RanaSurjyakanta Rana
Surjyakanta Rana
MŽMichal Žitňan
Michal Žitňan
CAChristopher W. Ashling
Christopher W. Ashling
MPMaria Pérez-Ramos
Maria Pérez-Ramos
Jose Joaquin Velazquez GarciaJose Joaquin Velazquez Garcia
Jose Joaquin Velazquez Garcia
Photocatalytic water splitting could become a major pillar in addressing future demands for carbon-free energy supply. To develop noble-metal-free photocatalyst microstructures, a heterostructure photocatalytic system containing hexagonal Zeolitic Imidazolate Framework-8 (ZIF-8) and oxygen-deficient spherical CuWO4 nanoparticles was designed. In addition to preventing CuWO4 aggregation, ZIF-8 promotes the accessibility of active sites, interfacial charge transfer, and separation in the ZIF-8@CuWO4 composite. In this composite, UV-visible diffuse reflectance spectroscopy reveals substantial light absorption in the UV range, while photoluminescence spectroscopy indicates suppressed electron-hole recombination relative to pristine materials. The as-synthesised ZIF-8@CuWO4 exhibits a photocatalytic H2 evolution rate of 2,531 μmol g-1 h-1 under UV irradiation, higher than that of pristine ZIF-8 and CuWO4. The composite achieves a maximum H2 production rate of 79 μmol g-1 h-1 under visible light irradiation using Na2S/Na2SO3 (0.35/0.25 M) as the sacrificial hole scavenger. These results highlight that integrating ZIF-8 with CuWO4 could offer an effective option for improving photocatalytic green hydrogen production in CuWO4-based heterojunction systems.

29 July 2026 in SSRN Electronic Journal
Verified
Preprint
Open access
OSOrhan Sisman
Orhan Sisman
FKFatih Kurtuldu
Fatih Kurtuldu
MŽMichal Žitňan
Michal Žitňan
Jose Joaquin Velazquez GarciaJose Joaquin Velazquez Garcia
Jose Joaquin Velazquez Garcia
NKNecmettin Kilinc
Necmettin Kilinc
Dušan GalusekDušan Galusek
Dušan Galusek
Optical spatiotemporal gas-sensing systems provide time-resolved visualization of gradual gas-induced optical changes across the sensing medium and are therefore tailor-made for probing sensing mechanisms governed by diffusive equilibration and spatial concentration gradients. In this work, the dynamic optical responses of Pd thin films (t=10 and 40 nm) deposited on AAO nanoporous membranes (øpore=100 and 200 nm) were investigated during H2 exposure-washing cycles over a broad concentration range from 0.01% to 10%. Time-resolved image sequences were recorded by stacking optical microscope images and analyzed by PCA combined with spatial change detection. In addition to simultaneously extracting temporal evolution and spatial activation patterns, the PCA-based analysis was used to obtain comparative effective diffusion/desorption descriptors from the recorded videos. SEM images confirmed the porous morphology of the membranes, while XPS analysis revealed the predominantly metallic state of the Pd films. Intermediate concentrations (0.025%-2.5%) produced the most informative responses, consistent with the expected palladium hydride (PdHx) phase transitions (α → α/β → β), as independently monitored by in-situ XRD. The different optical responses of injection and washing processes indicated that H2 uptake and release followed different dynamic pathways. The proposed PCA-based video analysis method offers a practical route not only for Pd-based optical H2-sensing and, more broadly, for mechanically responsive systems that exhibit stimulus-induced spatiotemporal optical changes.