Daniel Kottfer

Prof. Dr. Daniel Kottfer

orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 April 2018 in Coatings
Verified
Journal Article
Open access
PDF file
Karol KyziolKarol Kyziol
Karol Kyziol
JOJulia Oczkowska
Julia Oczkowska
DKDaniel Kottfer
Daniel Kottfer
MKMarek Klich
Marek Klich
Łukasz KaczmarekŁukasz Kaczmarek
Łukasz Kaczmarek
ZGZbigniew Grzesik
Zbigniew Grzesik
In this paper, the surface properties and selected mechanical and biological properties of various multi-layer systems based on diamond-like carbon structure deposited on low-density polyethylene (LDPE) substrate were studied. Plasma etching and layers deposition (incl. DLC, N-DLC, Si-DLC) were carried out using the RF CVD (radio frequency chemical vapor deposition) method. In particular, polyethylene with deposited N-DLC and DLC layers in one process was characterized by a surface hardness ca. seven times (up to ca. 2.3 GPa) higher than the unmodified substrate. Additionally, its surface roughness was determined to be almost two times higher than the respective plasma-untreated polymer. It is noteworthy that plasma-modified LDPE showed no significant cytotoxicity in vitro. Thus, based on the current research results, it is concluded that a multilayer system (based on DLC coatings) obtained using plasma treatment of the LDPE surface can be proposed as a prospective solution for improving mechanical properties while maintaining biocompatibility.

13 August 2020 in Materials
Verified
Journal Article
Open access
PDF file
PHPeter Horňák
Peter Horňák
DKDaniel Kottfer
Daniel Kottfer
Karol KyziolKarol Kyziol
Karol Kyziol
MTMarianna Trebuňová
Marianna Trebuňová
JMJanka Majerníková
Janka Majerníková
MPMiroslav Paľo
Miroslav Paľo
The present work studies the tungsten carbide (WC/C) coatings deposited by using Plasma Enhanced Chemical Vapor Deposition (PECVD), with and without gases of Ar and N2. Volatile hexacarbonyl of W was used as a precursor. Their mechanical and tribological properties were evaluated. The following values were obtained by using deposition process with N2 of HIT = 19.7 ± 4.1 GPa, EIT = 221 ± 2.1 GPa, and coefficient of friction (COF) = 0.35 ± 0.09. Secondly, deposition without the aforementioned gas obtained values of HIT = 20.9 ± 2 GPa, EIT = 292 ± 20 GPa, and COF = 0.69 ± 0.05. WC/C coatings were annealed at temperatures of 200, 500, and 800 °C, respectively. Evaluated factors include the introduced properties, the observed morphology, and the structural composition of WC/C coatings. The process of degradation was carried out by using various velocities, depending on used gases and annealing temperatures.

17 July 2023 in Materials
Verified
Journal Article
Open access
PDF file
MTMarianna Trebuňová
Marianna Trebuňová
DKDaniel Kottfer
Daniel Kottfer
Karol KyziolKarol Kyziol
Karol Kyziol
MKMaria Kanuchova
Maria Kanuchova
DMDavid Medveď
David Medveď
MCMária Csatáryová
Mária Csatáryová
This article presents a comparative study of WC and CrC coatings deposited by the plasma-enhanced chemical vapor method using the hexacarbonyls of W and Cr as precursors. The measured thicknesses of the WC and CrC coatings are equal to ca. 1.5 µm. The WC coating consists of microcolumns with a conical end, with gaps between the microcolumns up to approximately 100 nm, and their structure is formed by nanoparticles in the shape of globules with a diameter of up to 10 nm. In the case of the CrC coating, a cauliflower structure with gaps ranging from 20 to 100 nm was achieved. The diameter of cauliflower grains is from 50 nm to 300 nm. The C content in the WC and CrC coating is 66.5 at.% and 75.5 at.%. The W content is 1.4 at.% and the Cr content in the CrC coating is 1.2 at.%. The hardness and Young’s modulus of the WC coating are equal to 9.2 ± 1.2 GPa 440.2 ± 14.2 GPa, respectively. The coefficients of friction and wear volume of the WC coating are equal to 0.7 and −1.6 × 106/+3.3 × 106 µm3, respectively. The hardness and Young’s modulus of the CrC coating are 7.5 ± 1.2 GPa and 280 ± 18.5 GPa, respectively. The coefficients of friction and wear volume of the CrC coating are 0.72 and −18.84 × 106/+0.35 × 106 µm3, respectively.
1

1 March 2016 in Archives of Metallurgy and Materials
Verified
Journal Article
Open access
PDF file
DKDaniel Kottfer
Daniel Kottfer
MFM. Ferdinandy
M. Ferdinandy
Łukasz KaczmarekŁukasz Kaczmarek
Łukasz Kaczmarek
PTPeter Trenbuna
Peter Trenbuna
PHPavol Hvizdos
Pavol Hvizdos
This study investigates the selected properties of the thin Ti coating applied by activated evaporation EB PVD technique. This technique was used for the deposition of Ti thin coating onto inner surface of OKhN3 MFA steel tubes. Deposition process was carried out at temperature 200°C. Conventional type of coatings - monolayer Ti - was analyzed by standard techniques for surface status and quality assessment - coating thickness, chemical composition by EDX analysis, adhesion, hardness, roughness, and growth direction of columns at room temperature. Ti monolayer achieved roughness Ra equal from 0.42 μm to 0.47 μm. The resulting hardness was from 2 GPa to 8.5 GPa depending on the sample location inside the vacuum chamber. Placing of the coated surface also affected the direction of grain growth of Ti coating columns. The angles α of grain growth were found to be from 40° to 60°. Angle α increased two to three times more than the incidence angle β (from 12° to 28°) of evaporated Ti particles. Values of the adhesion measured along the Ti growth direction were mostly higher (up to 10%) or the same as those measured perpendicular to it.

6 December 2025 in Ceramics International
Verified
Journal Article
Closed access
KKKamil Kleszcz
Kamil Kleszcz
WSWitold Szymanski
Witold Szymanski
ŁKŁukasz Kaczmarek
Łukasz Kaczmarek
DKDaniel Kottfer
Daniel Kottfer
PKPatrik Klučiar
Patrik Klučiar
Karol KyziolKarol Kyziol
Karol Kyziol

12 March 2018 in Polish Journal of Environmental Studies
Verified
Journal Article
Open access
PTPeter Trebuňa
Peter Trebuňa
DKDaniel Kottfer
Daniel Kottfer
MPMiriam Pekarcikova
Miriam Pekarcikova
APAndrea Petriková
Andrea Petriková
RPRadko Popovič
Radko Popovič
PČPeter Čižnár
Peter Čižnár
Our paper deals with the possibility of replacing galvanic chrome coatings with thermal spraying, specifically with the high-velocity oxy-fuel coating spraying (HVOF) method. The article provides an analysis of alternatives compensation, mutual comparison of thermal spraying methods, and the choice of the most appropriate method for replacing galvanic chrome plating. Increased pressure on health and the environment necessitates the replacement of conventional galvanic plating process solution with hexavalent chromium Cr6+ by using environmentally friendly technology.