The global digital elevation measurement (DEM) products such as SRTM DEM and GDEM have been widely used for terrain slope retrieval in forests. However, the slope estimation accuracy is generally limited due to the DEMs’ low vertical accuracy over complex forest environments. The Ice, Cloud, and land Elevation Satellite-2 (ICESat-2) mission shows excellent potential for slope estimation because of the high elevation accuracy and unique design of beam pairs. This study aimed to explore the possibility of ICESat-2 data for terrain slope retrieval in the United States forests. First, raw ICESat-2 data were processed to obtain accurate ground surfaces. Second, two different methods based on beam pairs were proposed to derive terrain slopes from the ground surfaces. Third, the estimated slopes were validated by airborne LiDAR-derived slopes and compared with SRTM-derived slopes and GDEM-derived slopes. Finally, we further explored the influence of surface topography and ground elevation error on slope estimation from ICESat-2 data. The results show that the ground surface can be accurately extracted from all scenarios of ICESat-2 data, even weak beams in the daytime, which provides the basis for terrain slope retrieval from ICESat-2 beam pairs. The estimated slope has a strong correlation with airborne LiDAR-derived slopes regardless of slope estimation methods, which demonstrates that the ICESat-2 data are appropriate for terrain slope estimation in complex forest environments. Compared with the method based on along- and across-track analysis (method 1), the method based on plane fitting of beam pairs (method 2) has a high estimation accuracy of terrain slopes, which indicates that method 2 is more suitable for slope estimation because it takes full advantage of more ground surface information. Additionally, the results also indicate that ICESat-2 performs much better than SRTM DEMs and GDEMs in estimating terrain slopes. Both ground elevation error and surface topography have a significant impact on terrain slope retrieval from ICESat-2 data, and ground surface extraction should be improved to ensure the accuracy of terrain slope retrieval over extremely complex environments. This study demonstrates for the first time that ICESat-2 has a strong capability in terrain slope retrieval. Additionally, this paper also provides effective solutions to accurately estimate terrain slopes from ICESat-2 data. The ICESat-2 slopes have many potential applications, including the generation of global slope products, the improvement of terrain slopes derived from the existing global DEM products, and the correction of vegetation biophysical parameters retrieved from space-borne LiDAR waveform data.

As an important power facility for transmission corridors, automatic three-dimensional (3D) reconstruction of the pylon plays an important role in the development of smart grid. In this study, a novel three-dimensional reconstruction method using airborne LiDAR (Light Detection And Ranging) point cloud is developed and tested. First, a principal component analysis (PCA) algorithm is performed for pylon redirection based on the structural feature of the upper part of a pylon. Then, based on the structural similarity of a pylon, a pylon is divided into three parts that are inverted triangular pyramid lower structures, quadrangular frustum pyramid middle structures, and complex upper or lateral structures. The reconstruction of the inverted triangular pyramid structures and quadrangular frustum pyramid structures is based on prior knowledge and a data-driven strategy, where the 2D alpha shape algorithm is used to obtain contour points and 2D linear fitting is carried out based on the random sample consensus (RANSAC) method. Complex structures’ reconstruction is based on the priori abstract template structure and a data-driven strategy, where the abstract template structure is used to determine the topological relationship among corner points and the image processing method is used to extract corner points of the abstract template structure. The main advantages in the proposed method include: (1) Improving the accuracy of the pylon decomposition method through introducing a new feature to identify segmentation positions; (2) performing the internal structure of quadrangular frustum pyramids reconstruction; (3) establishing the abstract template structure and using image processing methods to improve computational efficiency of pylon reconstruction. Eight types of pylons are tested in this study, and the average error of pylon reconstruction is 0.32 m and the average of computational time is 0.8 s. These results provide evidence that the pylon reconstruction method developed in this study has high accuracy, efficiency, and applicability.

Figuring out the effect of the built-up environment on artificial light at night is essential for better understanding nighttime luminosity in both socioeconomic and ecological perspectives. However, there are few studies linking artificial surface properties to nighttime light (NTL). This study uses a statistical method to investigate effects of construction region environments on nighttime brightness and its variation with building height and regional economic development level. First, we extracted footprint-level target heights from Geoscience Laser Altimeter System (GLAS) waveform light detection and ranging (LiDAR) data. Then, we proposed a set of built-up environment properties, including building coverage, vegetation fraction, building height, and surface-area index, and then extracted these properties from GLAS-derived height, GlobeLand30 land-cover data, and DMSP/OLS radiance-calibrated NTL data. Next, the effects of non-building areas on NTL data were removed based on a supervised method. Finally, linear regression analyses were conducted to analyze the relationships between nighttime lights and built-up environment properties. Results showed that building coverage and vegetation fraction have weak correlations with nighttime lights (R² < 0.2), building height has a moderate correlation with nighttime lights (R² = 0.48), and surface-area index has a significant correlation with nighttime lights (R² = 0.64). The results suggest that surface-area index is a more reasonable measure for estimating light number and intensity of NTL because it takes into account both building coverage and height, i.e., building surface area. Meanwhile, building height contributed to nighttime lights greater than building coverage. Further analysis showed the correlation between NTL and surface-area index becomes stronger with the increase of building height, while it is the weakest when the regional economic development level is the highest. In conclusion, these results can help us better understand the determinants of nighttime lights.

The accurate estimation of within-footprint slope is very important for measuring earth’s surface characteristics using satellite light detection and ranging (LiDAR) data. Several models have previously been proposed for slope estimation; however, these models have limitations in either accuracy or applicability. Therefore, the main purpose of this paper is to explore the influence of various factors (e.g., ground vertical extent, footprint size, footprint shape, and footprint orientation) on slope estimation to better estimate the within-footprint slope using large-footprint waveform LiDAR data. The results indicated that the absolute slope error due to the coupling effect of ground vertical extent and footprint size increased with an increase in the ratio of ground vertical extent and footprint size, while the relative slope error had an opposite trend. The slope error caused by footprint shape was relatively low when the footprint eccentricity was small. However, the slope error due to footprint shape grew rapidly when the footprint eccentricity became larger; thus, it is essential to fully take into account the influence of footprint shape on within-footprint slope estimation. In addition, the results suggest that the slope error changed regularly based on the intersection angle between footprint orientation and terrain aspect. This paper also provided guidance for the determination of an easy and practical model for within-footprint slope estimation. The determination of best model is dependent on the value of intersection angle. Once the intersection value is given, the best model can easily be determined. Using the best model, the within-footprint terrain slope can be estimated with high accuracy.