Haemoglobin (Hb) concentration is a key biomarker for several diseases. Traditional laboratory methods often have limitations due to their time-consuming nature, the need for skilled personnel, or the use of high-cost instrumentation. This work presents a sensing strategy for developing new point-of-care tests (POCTs) for Hb detection via a proof of concept. The proposed sensing approach is implemented using plasmonic plastic optical fiber (POF) sensor chips that integrate an electropolymerized molecularly imprinted polymer (eMIP) film on the plasmonic surface for Hb-selective detection. The developed sensor system demonstrates an ultra-low detection limit of 80 fM in buffer, about five orders of magnitude lower than that of other comparable Hb sensors. Selectivity tests against common interfering proteins, such as bovine serum albumin (BSA) and immunoglobulin G (IgG), confirmed high specificity towards the target analyte. Moreover, the sensor’s performance was tested using a whole-blood sample, yielding results consistent with those of standard haematology analysis. The proposed sensor system, based on simple equipment, provides a quick (about 10 min) and cost-effective (about 10 euros per chip) label-free diagnostic tool for POCTs in real-world scenarios, such as finger-prick sampling, offering a less invasive alternative to traditional laboratory methods, towards devices useful for Internet of Medical Things (IoMT).
This work presents an intrinsic optical fiber sensor based on plasmonic phenomena in modified plastic optical fibers (POFs). The sensing area is achieved by replacing the polymethyl methacrylate (PMMA) core with a molecularly imprinted polymer (MIP) containing gold nanorods (GNRs). Thus, in the sensing area, the MIP acts as both a selective recognition element and an optically sensitive guiding medium where plasmonic phenomena occur. This optical–chemical configuration has been developed as a proof-of-concept for the detection of furfural in aqueous solution. The proposed sensor achieves a limit of detection (LOD) of 27 pM, demonstrates high selectivity for the analyte of interest, and is applicable even in real-world scenarios, as demonstrated by experimental results (a commercially available infant milk). The proposed sensor presents a significant enhancement of the sensor response, of about six orders of magnitude, compared to a conventional configuration where the same (or a similar) mixture of MIP/GNRs is spun over the exposed PMMA of a D-shaped POF area for comparison. Notably, even if this study has been carried out via a proof-of-concept in furfural detection, this substantial improvement is achieved while preserving a simple, portable, and cost-effective optical setup, highlighting the potential of this sensing strategy for the development of highly selective sensors by changing the MIP template.
The increasing demand for sustainable and disposable sensing platforms for bio/chemical sensors useful in point‐of‐care tests (POCTs), has spurred the development of biodegradable optical materials capable of replacing conventional fossil‐based materials, such as polymer optical fibers (POFs), in biomedical and environmental applications. In this study, surface plasmon resonance (SPR) sensors using biopolymer optical fibers (Bio‐POFs) made of cellulose acetate (CA) obtained by melt‐extrusion are developed and characterized for the first time. To excite plasmonic phenomena, gold nanolayers were deposited onto CA‐based Bio‐POFs, enabling sensor fabrication in a single production step. Several CA‐based Bio‐POFs were combined with the same gold nanolayers, and the resulting SPR Bio‐POF sensors were characterized using water solutions with different refractive indices. The obtained results demonstrated the capability to change the plasmonic phenomena via the diameter and composition of the CA‐based Bio‐POFs. Therefore, the present study shows that Bio‐POFs can combine sustainability, biodegradability, and custom plasmonic sensing performance, representing a promising route toward next‐generation eco‐friendly disposable optical bio/chemical sensor chips.