The integration of sensing devices into cell culture systems is a topic of great interest in the study of pathologies and complex biological mechanisms in real-time. In particular, the fit-for-purpose microfluidic devices called organ-on-chip (OoC), which host living engineered organs that mimic in vivo conditions, benefit greatly from the integration of sensors, enabling the monitoring of specific chemical-physical parameters that can be correlated with biological processes. In this context, copper is an essential trace element whose total concentration may be associated with specific pathologies, and it is therefore important to develop reliable analytical techniques in cell systems. Copper can be determined by using the anodic stripping voltammetry (ASV) technique, but its applicability in cell culture media presents several challenges. Therefore, in this work, the performance of ASV in cell culture media was evaluated, and an acidification protocol was tested to improve the voltammetric signal intensity. A Transwell® culture model with Caco-2 cells was used to test the applicability of the developed acidification protocol by performing an off-line measurement. Finally, a microfluidic device was designed in order to perform the acidification of the cell culture medium in an automated manner and then integrated with a silicon microelectrode to perform in situ measurements. The resulting sensor-integrated microfluidic chip could be used to monitor the concentration of copper or other ions concentration in an organ-on-chip model; these functionalities represent a great opportunity for the non-destructive strategic experiments required on biological systems under conditions close to those in vivo.
Rechargeable zinc–air batteries (ZABs) are promising candidates for sustainable energy storage owing to their high theoretical energy density, safety, and environmental compatibility. However, their practical application is hindered by sluggish oxygen evolution reaction (OER) kinetics and the high charging voltage required, which reduce energy efficiency and accelerate electrode degradation. Here, we report for the first time the beneficial role of potassium iodide (KI) as a reaction modifier in ZABs employing manganese dioxide (MnO2) as a bifunctional catalyst. MnO2 not only exhibits remarkable electrocatalytic activity toward the oxygen reduction reaction (ORR) but also catalyzes the iodide oxidation reaction (IOR), which proceeds at significantly lower potentials than the OER. As a result, KI-modified MnO2 ZABs achieve a remarkably low charging voltage of ≈1.8 V and an energy efficiency of 69.9% at 5 mA/cm2. Although the IOR is not fully reversible in alkaline media and its effectiveness depends on the iodide concentration in the electrolyte—which may decrease upon repeated discharge–charge cycling—the suppression of electrode degradation enables stable operation for more than 200 charge–discharge cycles. These findings demonstrate the synergistic effect of KI and MnO2 in enabling an efficient ORR/IOR pathway, providing a sustainable and cost-effective alternative to noble metal catalysts and opening new perspectives for the practical development of high-performance ZABs.