Owing to their superior biocompatibility, titanium and its alloys are often the first choice for implant materials in biomedical applications, especially for dental and bone repairs (orthodontics and prosthodontics). Titanium has low density and shows good mechanical and chemical properties. Although Ti-6Al-4V alloy exhibits excellent corrosion resistance properties, the metal ions released during corrosion are likely to induce aseptic loosening in long-term implantations. In the present study, Ti-6Al-4V alloy was subjected to two specific heat treatments, namely, air cooling and water quenching. The potentiodynamic polarization and electrochemical impedance spectroscopy measurements revealed remarkable improvement in the corrosion resistance properties of the heat-treated specimens. The presence of the β phase is a plausible reason for the improvement. Scanning electron microscopy, X-ray diffraction phase composition analysis, and microstructural characterization were performed to confirm the presence of the β phase.

The high cost of Pt-based electrode materials limits the commercialization of fuel cells and their subsequent application in renewable energy production. It is thus necessary to develop economical, high-performance electrodes alongside biofuels to reduce the pollution associated with the production of energy. Tin dioxide–copper foil (SnO₂–Cu) electrode materials are herein developed using an electrodeposition process. Cyclic voltammetry, chronoamperometry, and potentiodynamic polarization methods are used to electrochemically characterize the electrode materials, with the results revealing that their excellent catalytic properties result in them delivering a high current. The surface morphologies of the developed electrodes are examined using scanning electron microscopy, with the results showing that upon an increase in the deposition time, a finer deposit of SnO₂ is formed on the surface of the Cu foil. Consequently, electrochemical oxidation using an enhanced surface area of the material leads to it exhibiting a high current and excellent corrosion resistance. Powder X-ray diffraction was used to confirm the successful depositing of SnO₂ on the surface of Cu. The fuel cell fabricated using the SnO₂–Cu electrode is promising for use in clean energy generation, as it can be prepared at low cost compared to conventionally used electrodes.