This review provides an in-depth examination of the technologies and methods used for the acquisition and processing of kinetic and kinematic variables in human motion analysis. This review analyzes the capabilities and limitations of motion-capture cameras (MCCs), inertial measurement units (IMUs), force platforms, and other prototype technologies. The role of advanced processing techniques, including filtering and transformation methods, and the increasing integration of artificial intelligence (AI) and machine learning (ML) for data classification is also discussed. These advancements enhance the precision and efficiency of biomechanical analyses, paving the way for more accurate assessments of human movement patterns. The review concludes by providing guidelines for the effective application of these technologies in both clinical and research settings, emphasizing the need for comprehensive validation to ensure reliability. This comprehensive overview serves as a valuable resource for researchers and professionals in the field of biomechanics, guiding the selection and application of appropriate technologies and methodologies for human movement analysis.
The aim of this work is the evaluation of a Sulfonated Poly Ether-Ether Ketone (S-PEEK) polymer modified by the addition of pure Santa Barbara Amorphous-15 (SBA-15, mesoporous silica) and SBA-15 previously impregnated with phosphotungstic acid (PWA) fillers (PWA/SBA-15) in order to prepare composite membranes as an alternative to conventional Nafion® membranes. This component is intended to be used as an electrolyte in electrochemical energy systems such as hydrogen and methanol Proton Exchange Membrane Fuel Cell (PEMFC) and Electrochemical Hydrogen Pumping (EHP). The common requirements for all the applications are high proton conductivity, thermomechanical stability, and fuel and oxidant impermeability. The morphology of the composite membranes was investigated by Scanning Electron Microscopy- Energy Dispersive X-ray Spectroscopy (SEM-EDS) analysis. Water Uptake (Wup), Ion Exchange Capacity (IEC), proton conductivity, methanol permeability and other physicochemical properties were evaluated. In PEMFC tests, the S-PEEK membrane with a 10 wt.% SBA-15 loading showed the highest performance. For EHP, the inclusion of inorganic materials led to a back-diffusion, limiting the compression capacity. Concerning methanol permeability, the lowest methanol crossover corresponded to the composites containing 5 wt.% and 10 wt.% SBA-15.
In this study, the biosynthesis of polyhydroxyalkanoates (PHAs) was carried out using Pseudomonas putida and Pseudomonas aeruginosa. These PHAs were produced using reagent-grade glycerol and crude glycerol as the carbon sources. The objective was to compare the production of PHAs and to functionalize these polymers with silver nanoparticles to provide antibacterial properties for potential biomedical applications. The findings from the physical and chemical analyses confirmed the successful synthesis and extraction of PHAs, achieving comparable yields using both crude glycerol and reagent-grade glycerol as carbon sources across both strains. Approximately 16% higher PHAs production was obtained using Pseudomonas putida compared to Pseudomonas aeruginosa, and no significant difference was observed in the production rate of PHAs between the two carbon sources used, which means that crude glycerol could be utilized even though it has more impurities. Notably, PHAs functionalized with silver nanoparticles showed improved antibacterial effectiveness, especially those derived from reagent-grade glycerol and the Pseudomonas aeruginosa strain.
28 February 2020 in Journal of Nanoparticle Research
Hexavalent chromium (Cr(VI)) is a highly toxic, non-biodegradable, and carcinogenic heavy metal. Its continuous release into aquatic ecosystems demands efficient, low-cost adsorbents. In this study, orange peel and peanut shell residues were thermally modified at 250 °C to enhance Cr(VI) remediation. Structural characterization confirmed that low-temperature calcination transforms raw agroindustrial wastes into functional biochars with a chemical architecture primed for cooperative Cr(VI) removal. N2 physisorption revealed a hierarchical mesoporous network with average pore diameters of 30.6 nm (calcined orange peel) and 15.4 nm (calcined peanut shell), despite low specific surface areas. Batch adsorption experiments demonstrated that removal kinetics reached equilibrium within 5 min for the modified biochars. Isotherm modeling showed that the adsorption process was best described by the Freundlich and Sips models. The calculated Sips heterogeneity factors (βS > 1) provided evidence of a cooperative multi-layer adsorption mechanism, attributed to the induced mesoporosity: initial chemisorption at high-energy sites facilitates the continuous anchoring of additional Cr(VI) ions without premature saturation. Ultimately, this study demonstrates that low-temperature calcination is a viable strategy to transform agricultural waste into kinetically efficient, cooperative adsorbents for wastewater treatment.