Pengcheng Liu

Dr. Pengcheng Liu

orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 March 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
YXYang Xu
Yang Xu
ZWZheng Wang
Zheng Wang
Pengcheng LiuPengcheng Liu
Pengcheng Liu
JiangBiao HeJiangBiao He
JiangBiao He
This paper proposes a common-mode voltage (CMV) attenuation method for the three-phase current source inverter (CSI) fed permanent-magnet synchronous machine (PMSM) drive. The key of this method is to introduce an auxiliary circuit branch connected in parallel with the DC link. Based on the dedicated switching strategy, the zero-voltage-switching (ZVS) conditions are provided for the main switches in the CSI. In particular, the zero current vector is newly constructed without utilizing shoot-through operation in the CSI. Thus, the CMV in the traditional CSI drives is attenuated significantly. Compared with the existing research on CMV suppression, the proposed method will not compromise the modulation index range or increase output current harmonics. Meanwhile, the overshoot voltage can be clamped by the auxiliary power circuit in the DC link under open-circuit fault in the power switches. The system configuration, operating principle, analysis of operation modes, as well as the control scheme are described in detail. Both simulation and experimental results are presented to verify the performance of the proposed method.

24 June 2020 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
ZWZheng Wang
Zheng Wang
YXYang Xu
Yang Xu
Pengcheng LiuPengcheng Liu
Pengcheng Liu
YZYue Zhang
Yue Zhang
JiangBiao HeJiangBiao He
JiangBiao He
The SiC devices have attracted more and more attention due to the capability of withstanding higher blocking voltage, higher switching frequency, and higher temperature. However, challenges for SiC devices applied in voltage-source-inverter (VSI) fed motor drives such as electromagnetic interference (EMI) issues and limited over-current capability still limit the further application of SiC devices. In this paper, a novel SiC devices based zero-voltage-switching (ZVS) current-source-inverter (CSI) is proposed for permanent-magnet synchronous motor (PMSM) drive. The key is to propose an auxiliary resonant circuit, which achieves ZVS conditions for all switches in power circuits and reduces the dv/dt of high speed SiC devices. The resonant capacitor in the auxiliary circuit can clamp overvoltage caused by possible open-circuit faults. To further reduce the EMI, the random switching frequency PWM (RSFPWM) is designed for the proposed CSI motor drive. The system configuration, working principle, circuit design and control schemes are described in detail. Both simulations and experiments are presented to verify the effectiveness of the proposed ZVS CSI fed PMSM drive system.

11 November 2019 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
Pengcheng LiuPengcheng Liu
Pengcheng Liu
ZWZheng Wang
Zheng Wang
QSQiuxiao Song
Qiuxiao Song
YXYang Xu
Yang Xu
Ming ChengMing Cheng
Ming Cheng
In this paper, the switching strategy and the remedial control scheme are studied for the cascaded current-source converters (CSCs) fed dual three-phase permanent-magnet synchronous motor (PMSM) variable-speed drives. An optimized space vector modulation (SVM) strategy is proposed to reduce the DC-link current ripple for the proposed drives system. In particular, this switching strategy can work effectively for motor drives under low speed with low back-EMF, where there exists a large voltage difference between peak voltage values on the grid side and the motor side. Apart from that, a hybrid fault-tolerant control scheme is also designed for the open-phase fault in dual three-phase PMSM drives system, aiming at achieving small DC-link current ripple and torque ripple, low copper loss and machine-friendly waveform quality. With the proposed optimized SVM and the hybrid fault-tolerant control strategy, the DC-link current ripple of the cascaded CSCs system can be effectively reduced and good operational performance can be obtained under both normal operation condition and open-phase fault condition. Experimental results are provided to verify the effectiveness of the proposed methods.

17 April 2023 in IEEE Transactions on Transportation Electrification
Verified
Journal Article
Closed access
MGMinrui Gu
Minrui Gu
ZWZheng Wang
Zheng Wang
Pengcheng LiuPengcheng Liu
Pengcheng Liu
JiangBiao HeJiangBiao He
JiangBiao He
In this paper, multiple advanced low-switching-frequency modulation and control schemes are investigated for dual three-phase permanent-magnet synchronous motor (PMSM) drives. The modulation schemes under investigation include multisampling space vector modulation (MS-SVM), selective harmonic elimination pulse width modulation (SHEPWM) and synchronous optimal pulse width modulation (SOPWM) while the control schemes include complex vector control, model predictive control (MPC) and flux trajectory control-based model predictive pulse pattern control (MP 3 C). The difference between three-phase and dual three-phase PMSM drives at low switching frequencies is analyzed. Moreover, an optimal pulse width modulation (PWM)-based MP 3 C scheme is proposed for the dual three-phase PMSM, where the optimal PWM modulation and MP 3 C control are combined such that the optimal steady-state and dynamic control performance is achieved among the modulation and control schemes investigated. Experimental results are given to compare and validate the proposed control scheme.

27 October 2021 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
YXYang Xu
Yang Xu
ZWZheng Wang
Zheng Wang
Pengcheng LiuPengcheng Liu
Pengcheng Liu
QWQiang Wei
Qiang Wei
FDFujin Deng
Fujin Deng
Zhixiang ZouZhixiang Zou
Zhixiang Zou
In this article, a modular current-fed high-frequency transformer isolated matrix converters (CF-HFT-MC) based wind energy conversion system (WECS) is proposed. The CF-HFT-MC module utilizes the high-frequency transformer instead of the line-frequency input transformer, and eliminates the bulky and vulnerable electrolytic capacitors in the WECS. Therefore, the power density, reliability and efficiency of WECS can be increased. Moreover, single-stage power conversion and soft-switching can be achieved in the CF-HFT-MC modules, which can reduce the losses of the system. With the function of electric isolation, the wind turbines can be connected in series through the proposed CF-HFT-MC modules. Thus, the total dc output voltage is increased, which enables the offshore wind farm to be integrated to the current-source-converters based HVdc transmission directly. The modulation, control scheme and power sharing method are analyzed and designed for the proposed CF-HFT-MC based WECS in this article. Both the simulations and the experiments are given to verify the effectiveness of the proposed system.

28 April 2020 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
Pengcheng LiuPengcheng Liu
Pengcheng Liu
ZWZheng Wang
Zheng Wang
YXYang Xu
Yang Xu
Huafeng XiaoHuafeng Xiao
Huafeng Xiao
YLYunwei Li
Yunwei Li