Vladislav Bures

Dr. Vladislav Bures


Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 November 2024 in Inżynieria Mineralna
Verified
Journal Article
Open access
PDF file
Petr MynarcikPetr Mynarcik
Petr Mynarcik
VBVladislav Bures
Vladislav Bures
MJMarek Johanides
Marek Johanides
Pavel DobešPavel Dobeš
Pavel Dobeš
DMDavid Mikolasek
David Mikolasek
MPMartin Patrman
Martin Patrman
The issue of insufficient reliability and, in some cases, the failure of post - tensioned bridge structures, footbridges, and roof trusses, particularly in industrial halls, is one of the current and serious problems of the construction industry in the Czech Republic. The most well - known failures of these structures include the collapse of the Morandi Bridge near Genoa, Italy, in August 2018, and the collapse of the Troja footbridge in Prague in December 2017. Less known are the failures of post - tensioned truss roof structures that occurred in the Czech Republic and Slovakia. Especially in the Czech Republic, there were failures in Tachov (2010 and 2018), Sluknov (December 2023), and Karlovy Vary (March 2024). A common feature of all these failures was the corrosion of the prestressing reinforcement in inadequately grouted cable ducts. Roof structures of this type have been used in more than 100 buildings that are still in operation in the Czech Republic. In response to this situation, the company Rada Building s.r.o., in cooperation with academic institutions, developed a method to reinforce trusses threatened by corrosion using an external steel structure. The company carries out the reinforcement work during normal operation in the hall below the trusses. Research on post - tensioned truss structures and the possibilities of their static securing is being conducted in cooperation with the Faculty of Civil Engineering at VSB – Technical University of Ostrava, the Faculty of Art and Architecture at the Technical University of Liberec, and the company Rada Building, s.r.o. The ambition of the research is to analyze the condition of as many trusses as possible embedded in buildings in the Czech Republic and Slovakia using building structure diagnostic methods and to evaluate these surveys. Furthermore, the research aims to verify the actual behavior of such structures through tests on real trusses taken from demolished buildings. VSB – TU Ostrava has several trusses available, and load tests are currently being carried out on them. An important and final part of the research is to find the optimal diagnostic method that would improve the ability to predict the risk of roof failures in operational buildings and to optimize the methods for securing these structures to ensure full static reliability with the lowest possible costs and minimal impact on the building.

26 August 2026 in Materials
Verified
Journal Article
Open access
PDF file
VSVojtěch Jan Stoklasa
Vojtěch Jan Stoklasa
VBVladislav Bures
Vladislav Bures
OMOto Melter
Oto Melter
DCDavid Citek
David Citek
PZPetr Zelený
Petr Zelený
Katarzyna Ewa ŁośKatarzyna Ewa Łoś
Katarzyna Ewa Łoś
Geopolymers represent a promising material platform for extrusion-based 3D printing; however, current research remains largely focused on mix design, rheology, printability, buildability, and the relationship between process parameters and the resulting microstructure. This article therefore compares the behaviour of two 3D-printed geopolymer composite truss beams with reference cementitious composite beams developed within the 3D STAR project. The geopolymer elements, 2932 mm long, were designed for the same material volume and target geometry as the reference CC element; however, because of mixture spreading, they reached cross-sections of only approximately 140/250 mm and 170/250 mm. The first beam was printed without setting acceleration, while the second was locally treated with a hot-air gun. In four-point bending, GC-2 was loaded first and reached 22 kN, while GC-1 was loaded second and reached 29 kN; the reference cementitious beams reached 31 and 40 kN. The CC elements failed by rupture of the tensile reinforcement, while the GC elements failed by joint failure followed by deformation and local disintegration of the composite. The study thus shows that the main difference between the two systems lies not only in the achieved load-bearing capacity, but also in stiffness, the shape of the load-displacement diagrams, and the failure mechanism.

10 July 2026 in Preprints.org
Verified
Preprint
Open access
PDF file
VSVojtěch Jan Stoklasa
Vojtěch Jan Stoklasa
VBVladislav Bures
Vladislav Bures
OMOto Melter
Oto Melter
DCDavid Citek
David Citek
PZPetr Zelený
Petr Zelený
Katarzyna Ewa ŁośKatarzyna Ewa Łoś
Katarzyna Ewa Łoś
Geopolymers represent a promising material platform for extrusion-based 3D printing; however, current research remains largely focused on mix design, rheology, printability, buildability, and the relationship between process parameters and the resulting microstructure (1–7). This article therefore compares the behaviour of two 3D-printed geopolymer composite truss beams with reference cementitious composite beams developed within the 3D STAR project (8). The geopolymer elements, 2932 mm long, were designed for the same material volume and target geometry as the reference CC element; however, because of mixture spreading, they reached cross-sections of only approximately 140/250 mm and 170/250 mm. The first beam was printed without setting acceleration, while the second was locally treated with a hot-air gun. In four-point bending, the geopolymer beams reached maximum forces of 22 and 29 kN, whereas the reference cementitious beams reached 31 and 40 kN. The CC elements failed by rupture of the tensile reinforcement, while the GC elements failed by joint failure followed by deformation and local disintegration of the composite. The study thus shows that the main difference between the two systems lies not only in the achieved load-bearing capacity, but also in stiffness, the shape of the load-displacement diagrams, and the failure mechanism.

4 June 2023
Verified
Conference Paper
Open access
PDF file
JKJiří Kolísko
Jiří Kolísko
KHKarel Hurtig
Karel Hurtig
DCDavid Citek
David Citek
VBVladislav Bures
Vladislav Bures
MKMartin Kroc
Martin Kroc
With the progressing wave of automation, robotization and thus 3D printing is not only reaching areas of engineering, but also areas where its application has not been common or expedient until now. One such field is construction. The precision and speed of machine production and the advancing technological development of robotic manipulators enable new use of these tools in sectors requiring precise work on a larger scale (building elements, but also entire buildings). The advantages of using these technologies in the construction industry include a potentially significantly higher speed of construction, material savings and physically and economically demanding human labor. Another significant advantage is the possibility to create objects or their parts that are almost unlimited in shape. In combination with the advantages of the UHFRC material (start-up speed, ideal for thin-walled constructions, high strength and durability), a very efficient and modern technology is obtained. Until now, the use of automated technologies in the implementation of constructions has been limited mainly to subtractive methods (where material is removed until the final shape of the product is achieved), such as CNC milling, laser, plasma and water jet cutting, turning, etc. The development of additive manufacturing technologies and by gradually increasing the products created by this technology, its application in the construction industry became not only possible, but often also very expedient. The paper describes the development of not only the UHPC mixture but also other cement composites and their tests within the development of the entire 3D printing technology.