3 May 2018 in npj Flexible Electronics
Current marine research primarily depends on weighty and invasive sensory equipment and telemetric network to understand the marine environment, including the diverse fauna it contains, as a function of animal behavior and size, as well as equipment longevity. To match animal morphology and activity within the surrounding marine environment, here we show a physically flexible and stretchable skin-like and waterproof autonomous multifunctional system, integrating Bluetooth, memory chip, and high performance physical sensors. The sensory tag is mounted on a swimming crab (Portunus pelagicus) and is capable of continuous logging of depth, temperature, and salinity within the harsh ocean environment. The fully packaged, ultra-lightweight (<2.4 g in water), and compliant “Marine Skin” system does not have any wired connection enabling safe and weightless cutting-edge approach to monitor and assess marine life and the ecosystem’s health to support conservation and management of marine ecosystems.
3 February 2021 in PLOS ONE
This paper reports a novel, negligible-cost and open-source process for the rapid prototyping of complex microfluidic devices in polydimethylsiloxane (PDMS) using 3D-printed interconnecting microchannel scaffolds. These single-extrusion scaffolds are designed with interconnecting ends and used to quickly configure complex microfluidic systems before being embedded in PDMS to produce an imprint of the microfluidic configuration. The scaffolds are printed using common Material Extrusion (MEX) 3D printers and the limits, cost & reliability of the process are evaluated. The limits of standard MEX 3D-printing with off-the-shelf printer modifications is shown to achieve a minimum channel cross-section of 100×100 μm. The paper also lays out a protocol for the rapid fabrication of low-cost microfluidic channel moulds from the thermoplastic 3D-printed scaffolds, allowing the manufacture of customisable microfluidic systems without specialist equipment. The morphology of the resulting PDMS microchannels fabricated with the method are characterised and, when applied directly to glass, without plasma surface treatment, are shown to efficiently operate within the typical working pressures of commercial microfluidic devices. The technique is further validated through the demonstration of 2 common microfluidic devices; a fluid-mixer demonstrating the effective interconnecting scaffold design, and a microsphere droplet generator. The minimal cost of manufacture means that a 5000-piece physical library of mix-and-match channel scaffolds (100 μm scale) can be printed for ~$0.50 and made available to researchers and educators who lack access to appropriate technology. This simple yet innovative approach dramatically lowers the threshold for research and education into microfluidics and will make possible the rapid prototyping of point-of-care lab-on-a-chip diagnostic technology that is truly affordable the world over.
1 January 2018 in Electrochimica Acta
22 September 2025 in RSC Advances
Low-temperature PECVD growth of TiO2@C core–shell nanowires with enhanced electrochemical performance, stability, and biocompatibility for cellular interface applications.
22 February 2026 in SSRN Electronic Journal
Radiotherapy remains a primary treatment for brain cancers but induces neuronal damage through the generation of reactive oxygen species (ROS), particularly hydrogen peroxide (H2O2). Astrocytes, which provide essential neuroprotective support, are highly sensitive to oxidative stress. Thus, monitoring H2O2 dynamics in these cells is critical for understanding radiation-induced neurotoxicity. Conventional fluorescence-based ROS probes, such as DCFH-DA and optogenetic sensors, face limitations in selectivity, signal stability, and multiplexing. To address these challenges, we developed an electrochemical sensing platform for real-time monitoring of H2O2 in astrocyte cultures. The system employs laser-scribed graphene (LSG) interdigitated electrodes with platinum (Pt) and Prussian blue (PB) functioning as generator and collector electrodes, respectively. PB’s molecular selectivity toward H2O2 enables high specificity and mitigates interference from electroactive species in complex media. The sensor exhibited a limit of detection of 4.58 µM and a sensitivity of 579 mA•M⁻¹•cm⁻² in cell culture medium. Its capability was validated by detecting extracellular H2O2 released from X-ray-irradiated astrocytes across varying doses and time points. Overall, this graphene-based electrochemical system provides a robust and scalable approach for real-time analysis of radiation-induced oxidative stress, offering a valuable tool for studying neuroprotection, radiotherapy response, and brain-on-chip disease modeling.