Atomic layer deposition (ALD) of aluminum nitride (AlN) using in situ atomic layer annealing (ALA) is studied for microelectromechanical systems (MEMS). Effective piezoelectric in-plane actuation and sensing requires deposition of high crystal quality and (0002) oriented AlN on vertical sidewalls of MEMS structures. Previous studies have shown that the crystal quality of ALD AlN can be significantly improved using ALA but have not studied the conformal coverage or crystal quality on metal electrodes, which are required for piezoelectric MEMS devices. In this study, AlN thin films are deposited on Si, Al, Pt, and on vertical sidewalls etched into Si. The AlN microstructure and properties are studied using x-ray diffraction methods, transmission electron microscopy, and Fourier transform infrared spectroscopy. The conformal coverage is evaluated by measuring the film thickness on the vertical sidewalls. The effects of postdeposition annealing are studied as well. This study aims to enable effective piezoelectric actuation and sensing for MEMS sensors. The conformal coverage of the ALA ALD process is excellent and AlN has the best crystal quality and degree of orientation when deposited on Al. The as-deposited films contain oxygen impurities, which might be detrimental to the piezoelectric properties of AlN. Annealing at high temperatures reduced the number of impurities but did not improve the crystal quality.
Several passivation techniques are developed and compared in terms of their ability to preserve the optical properties of close-to-surface InAs/GaAs quantum dots (QDs). In particular, the influence of N-passivation by hydrazine chemical treatment, N-passivation by hydrazine followed by atomic layer deposition (ALD) of AlO x and use of AlN x deposited by plasma-enhanced ALD are reported. The effectiveness of the passivation is benchmarked by measuring the emission linewidths and decay rates of photo-carriers for the near-surface QDs. All three passivation mechanisms resulted in reducing the oxidation of Ga and As atoms at the GaAs surface and consequently in enhancing the room-temperature photoluminescence (PL) intensity. However, long-term stability of the passivation effect is exhibited only by the hydrazine + AlO x process and more significantly by the AlN x method. Moreover, in contrast to the results obtained from hydrazine-based methods, the AlN x passivation strongly reduces the spectral diffusion of the QD exciton lines caused by charge fluctuations at the GaAs surface. The AlN x passivation is found to reduce the surface recombination velocity by three orders of magnitude (corresponding to an increase of room-temperature PL signal by ∼1030 times). The reduction of surface recombination velocity is demonstrated on surface-sensitive GaAs (100) and the passivating effect is stable for more than one year. This effective method of passivation, coupled with its stability in time, is extremely promising for practical device applications such as quantum light sources based on InAs/GaAs QDs positioned in small-volume photonic cavities and hence in the proximity of GaAs-air interface.
Aluminum nitride (AlN) films have been grown using novel technological approaches based on plasma-enhanced atomic layer deposition (PEALD) and in situ atomic layer annealing (ALA). The growth of AlN layers was carried out on Si and Si substrates at low growth temperature. The investigation of crystalline quality of samples demonstrated that PEALD grown layers were polycrystalline, but ALA treatment improved their crystallinity. A thick polycrystalline AlN layer was successfully regrown by metal-organic chemical vapor deposition (MOCVD) on an AlN PEALD template. It opens up the new possibilities for the formation of nucleation layers with improved quality for subsequent growth of semiconductor nitride compounds.
19 July 2023 in Journal of Vacuum Science & Technology A
The effect of adding an atomic layer annealing step to a plasma-enhanced atomic layer deposition process of aluminum nitride was investigated with commonly available materials. The refractive index, crystallinity, stoichiometry, and impurity concentrations were studied from films grown from trimethylaluminum and ammonia precursors at 300°C on Si(111) substrates. Additional energy provided by the atomic layer annealing step during each deposition cycle was found to enhance the crystallinity and stoichiometry and increase the refractive index and film density. A polycrystalline hexagonal film with a weak c-axis orientation was obtained on substrates with and without native oxide, which is promising for applications that require high quality films at low temperatures.
Two-dimensional semiconducting transition metal dichalcogenides (TMDs) have attracted significant interest due to their unique optoelectronic properties. More often, these materials are enclosed inside a dielectric layer that can work as an insulator for field-effect transistors. The insulating layer is typically grown with atomic layer deposition (ALD). Here, we study the effects on bare and hBN-covered monolayer MoS2 and WSe2 flakes with ALD TiO2 films. Our results reveal a significant shift and decrease in intensity in photoluminescence and Raman signals of the monolayer TMDs. Further analysis suggests that these changes are caused by chemical doping, strain, and dielectric screening after the ALD. Our study not only sheds light on the impact of ALD on the properties of TMDs, but also indicates ALD can be an alternative method to engineer the doping, strain and dielectric environment for potential optoelectronics and photonics applications.